Használati útmutató Samsung 933BWPLUS

Samsung Monitor 933BWPLUS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Samsung 933BWPLUS (196 oldal) a Monitor kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/196

LCD Monitor

User Manual

Safety Instructions

Notational

Note

These safety instructions must be followed to ensure your safety and prevent property damage.

Make sure to read the instructions carefully and use the product in the correct manner.

Warning / Caution

Otherwise, it may result in death or personal injury.

Otherwise, it may result in personal injury or property damage.

Notational Conventions

Prohibited Important to read and under-

stand at all times

Do not disassemble Disconnect the plug from the

outlet

Do not touch Ground to prevent an electric

shock

Power

When not used for extended period of time, set your computer to DPM.

If using screen saver, set it to active screen mode.

The images here are for reference only, and are not applicable in all cases (or

countries).

Shortcut to Anti-Afterimage Instructions

Do not use a damaged power cord or plug or a damaged or loose power

outlet.

• Otherwise, this may result in electric shock or re.

Do not touch the power plug with wet hands when removing or plug-

ging the plug into the outlet.

• Otherwise, this may result in electric shock.

Make sure to connect the power cord to a grounded power outlet.

• Otherwise, it may result in electric shock or personal injury.

Ensure that the power plug is plugged into the power outlet rmly and

correctly.

• Otherwise, this may result in re.

Do not forcefully bend or pull the power plug and do not place any

heavy material on it.

• Otherwise, this may result in re.

Do not connect multiple appliances to the same power outlet.

• Otherwise, this may cause re due to overheating.

Do not disconnect the power cord while using the monitor.

• Otherwise, this may result in damage to the product due to electric

shock.

To disconnect the apparatus from the mains, the plug must be pulled

out from the mains socket, therefore the mains plug shall be readily op-

erable.

• This may cause electric shock or re.

Use only the power cord provided by our company. Do not use the

provided power cord of another product.

• Otherwise, this may result in re or electric shock.

Installation

Be sure to contact an authorized when installing your monitor inService Center

a location with heavy dust, high or low temperatures, high humidity, and exposed

to chemical substances and where it operates for 24 hours such as at airports,

train stations etc.

Failure to do so may cause serious damage to your monitor.

Do not drop the monitor when moving it.

• This may cause damage to the product or the person carrying it.

When installing the product in a cabinet or rack, make sure that the

front end of the bottom of the product does not project out.

• Otherwise, it may fall or cause personal injury.

• Use a cabinet or rack of a size appropriate to the product.

DO NOT PLACE CANDLES,MOSQUITO REPELLANT,CIGA-

RETTES AND ANY HEATING APPLIANCES NEAR THE PROD-

UCT.

• Otherwise, this may cause re.

Safety Instructions

Keep heating appliances as far away from the power cord or the prod-

uct as possible.

• Otherwise, this may result in electric shock or fire.

Do not install it in a badly ventilated location such as a bookcase or

closet.

• Otherwise, this may result in fire due to an increase in the internal

temperature.

Put down the monitor carefully.

• Failing to do so may damage the monitor.

Do not place the front of the product on the floor.

• Otherwise, this may result in damage to the screen display.

Ensure that an authorized installation company installs the wall mount.

• Otherwise, it may fall and cause personal injury.

• Make sure to install the specified wall mount.

Install your product in a well ventilated location. Ensure that there is

a clearance of more than 10 cm from the wall.

• Otherwise, it may result in fire due to an increase in the internal tem-

perature.

Ensure that the packaging vinyl is kept away from children.

• Otherwise, it may result in serious harm (suffocation) if children play

with it.

If the height of your monitor is adjustable, do not place any object or

part of your body on the stand when lowering it.

• This may cause damage to the product or the person carrying it.

Clean

When cleaning the monitor case or the surface of the TFT-LCD screen, wipe

with a slightly moistened, soft fabric.

Do not spray cleaner directly onto the surface of the product.

• Otherwise, this may result in the discoloration and distortion of the

structure and the screen surface may peel off.

Clean the product using a soft cloth with a monitor cleaner only. If

you must use a cleaner other than the monitor cleaner, dilute it with water

at a ratio of 1:10.

Safety Instructions

When cleaning the power plug pins or dusting the power outlet, clean

it with a dry cloth.

• Otherwise, it may result in re.

When cleaning the product, make sure to disconnect the power cord.

• Otherwise, it may result in electric shock or re.

When cleaning the product, disconnect the power cord and clean it

softly with a dry cloth.

• (Do not use chemicals such as wax, benzene, alcohol, thinner, mos-

quito repellant, lubricant, or cleaner.) These may change the appear-

ance of the product surface and peel o the indication labels on the

product.

Since the product housing is easily scratched, make sure to use the

specied cloth only.

• Use the specied cloth adding only a little water. As the product may

be scratched if there is any foreign material on the cloth, make sure

to shake it thoroughly before using it.

When cleaning the product, do not spray water directly onto the main

body of the product.

• Ensure that water does not enter the product and that it is not wet.

• Otherwise, this may result in electric shock, re or a malfunction.

Others

The product is a high voltage product. Ensure that users do not disas-

semble, repair or modify the product themselves.

• Otherwise, this may result in electric shock or re. If the product

needs to be repaired, contact a Service Center.

If there is a strange smell or a strange sound or smoke is coming from

the product, disconnect the power plug immediately and contact a Service

Center.

• Otherwise, this may result in electric shock or re.

Do not place this product in a location exposed to moisture, dust,

smoke, water, or in a car.

• Otherwise, this may result in electric shock or re.

When you drop the product or the case is broken, turn the power o

and disconnect the power cord. Contact a Service Center.

• Otherwise, this may result in electric shock or re.

Safety Instructions

If thunder or lightening is occurring, do not touch the power cord or

antenna cable.

• Otherwise, this may result in electric shock or re.

Do not try to move the monitor by pulling only the wire or the signal

cable.

• Otherwise, it may fall and result in electric shock, damage to the

product or re due to damage to the cable.

Do not lift or move the product back and forwards or right and left

while only holding the power cord or signal cables.

• Otherwise, it may fall and result in electric shock, damage to the

product or re due to damage to the cable.

Make sure that the ventilating opening is not blocked by a table or

curtain.

• Otherwise, it may result in re due to an increase in the internal tem-

perature.

Do not place any containers containing water, vases, owerpots, med-

icines as well as any metal on the product.

• If water or a foreign material enters the product, disconnect the power

cord and contact a Service Center.

• This may result in a product malfunction, electric shock, or re.

Do not use or keep combustible spray or ammable material near the

product.

• Otherwise, this may result in an explosion or re.

Do not insert any metal, such as chopsticks, coins, pins and steel, or

ammable objects, such as matches or paper, inside the product (through

the ventilating openings, input and output terminals, etc).

• If water or foreign material enters the product, disconnect the power

cord and contact a Service Center.

• Otherwise, this may result in electric shock or re.

When using a xed screen for a long time, an afterimage or stain may

occur.

• If you are not using your product for a long period of time, put it into

sleep mode or use a moving screen saver.

Set a resolution and frequency appropriate to the product.

• Otherwise, your eyesight may be damaged.

Keep the volume at a comfortable level when using the headphones.

• Excessively loud volume level may damage hearing.

Safety Instructions

If you continually move closer to the product screen, your eyesight

may be failing.

To ease eye strain, take at least a ve-minute break after every hour

of using the monitor.

Do not install it in an unstable location such as an unstable rack or

uneven surface or a location exposed to vibrations.

• Otherwise, it may fall and cause personal injury and/or damage the

product.

• If you use the product in a location exposed to vibrations, it may

damage the product and result in re.

When moving the product, turn the power o and disconnect the power

plug, antenna cable, and all the cables connected to the product.

• Otherwise, it may result in electric shock or re.

Ensure that children do not hang onto the product or climb up onto the

product.

• The product may fall and cause personal injury or death.

If you do not use the product for a long period of time, disconnect the

power cord from the power outlet.

• Otherwise, this may result in overheating or re due to dust, and may

result in re due to electric shock or leakage.

Do not place any heavy items or toys or confectionery, such as cookies

etc. that may attract the attention of children and to the product.

• Your children may hang onto the product causing it to fall and this

may result in personal injury or death.

Do not turn the product upside down or move it while holding only

the stand.

• Otherwise, it may fall and result in personal injury and/or damage to

the product.

Do not place the product in a location exposed to direct sunlight or

near any heat such as a re or heater.

• This may reduce the lifetime of the product, and may result in re.

Do not drop any objects onto the product or cause any impact to the

product.

• Otherwise, this may result in electric shock or re.

Safety Instructions

Do not use a humidier or kitchen table near the product.

• Otherwise, this may result in electric shock or re.

When there is a gas leak, do not touch the product or the power plug

but ventilate immediately.

• If a spark occurs, it may cause an explosion or re.

If the product has been turned on for a long time, the display panel

becomes hot. Do not touch it.

• Keep the small accessories in a location out of the reach of children.

Be careful when adjusting the angle of the product or the height of the

stand.

• This may result in personal injury as your hand or ngers may be-

come caught.

• Also, if you tilt the product too far, it may fall and cause personal

injury.

Do not install the product in a location low enough for children to

reach.

• Otherwise, it may fall and result in personal injury.

• Since the front part of the product is heavy, install the product on a

level and stable surface.

Do not put any heavy objects on the product.

• This may result in personal injury and/or damage to the product.

Good Postures When Using the Monitor

When using the product, use it in the correct position.

• Keep your back straight while looking at the product.

• The distance between your eyes and the screen should

be between 45 to 50 cm. Look at the screen from a

slightly higher location than the height of the screen.

• When using the product, use it in the correct position.

• Adjust the angle so that light is not reected on the

screen.

• Place your arms perpendicular to your sides and allow

your arms to be level with the back of the hand.

• Keep your elbow at 90 degrees.

• Keep your knees at greater than 90 degrees, and keep

your heels rmly on the oor. Keep your arms lower

than your heart.

Safety Instructions

Introduction

Package Contents

Note

Please make sure the following items are included with your monitor.

If any items are missing, contact your dealer.

Contact a local dealer to buy optional items.

Unpacking

Monitor

Manuals

Quick Setup Guide Warranty Card

(Not available in all loca-

tions)

User's Guide

Cables

D-Sub Cable Power Cord DVI Cable (option)

Others

Cleaning Cloth(Option) Cable holding ring

Note

Cleaning Cloth is only provided for highly polished black products as a product feature.

Your Monitor

Initial Settings

Select the language using the up or down key.

The displayed content will disappear after 40 seconds.

Turn the Power button o and on. It will be displayed again.

It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before reaching

the maximum count.

Note

The resolution displayed on the screen is the optimal resolution for this product.

Adjust your PC resolution so that it is the same as the optimal resolution for this product.

Front

MENU button [MENU/ ]

Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu

or return to the previous menu.

Brightness button [ ]

When OSD is not on the screen, push the button to adjust brightness.

Customized Key[ ]

Introduction

You can customize key assignment for the Custom button according to your pref-

erences.

Note

You can congure the customized key for a required function via > Setup Cus-

tomized Key.

Adjust buttons [ ]

These buttons allow you to adjust items in the menu.

Enter button [ ]

Activates a highlighted menu item.

Push the ' ', then selects the video signal while the OSD is o. (When the ' '

button is pressed to change the input mode, a message appears in the upper left of

the screen displaying the current mode -- analog or digital input signal.)

Note

• If you select the digital mode, you must connect your monitor to the graphic

card's DVI port using the DVI cable.

• This function is not available for products with an Analog interface only.

AUTO button

Usethis button for auto adjustment.

(Available in Analog mode only)

Power button [ ]

Use this button for turning the product on and o.

Power Indicator

This light is lit when operating normally, and blinks once when your adjustments

are saved.

Note

See PowerSaver described in the manual for further information regarding power

saving functions. For energy conservation, turn your monitor OFF when it is not

needed or when leaving it unattended for long periods.

Rear

Note

The conguration at the back of the monitor may vary from product to product.

POWER port

Introduction

POWER port

Connect the power cord for your monitor to the

POWER port on the back of the product.

DVI IN

Connect the DVI Cable to the DVI IN port on the

back of your monitor.

Note

Applicable to the digital (DVI)-dedicated models

only.

RGB IN

Connect the D-sub cable to the 15-pin, RGB IN

port on the back of your monitor.

Kensington Lock

The Kensington lock is a device used to physi-

cally x the system when using it in a public

place. (The locking device has to be purchased

separately.) For using a locking device, contact

where you purchase it.

Note

The location of the Kensington Lock may be dif-

ferent depending on its model.

Using the Anti-Theft Kensington Lock

1. Insert the locking device into the Kensington

slot on the Monitor and turn it in the

locking direction .

Introduction

2. Connect the Kensington Lock cable.

3. Fix the Kensington Lock to a desk or a heavy

stationary object.

Note

See Connecting Cables for further information regarding cable connections.

Cable holding ring

• Fix the cables using the holding ring, as shown in the gure.

Introduction

Connections

Connecting Cables

Use a connection appropriate for your computer.

Using the D-sub (Analog) connector on the video card.

• Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

Using the DVI (Digital) connector on the video card.

• Connect the DVI Cable to the DVI IN Port on the back of your Monitor.

Connect the power cord for your monitor to the power port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

Note

If the monitor and the computer are connected, you can turn them on and use them.

Using the Stand

Folding the base

Note

You can tilt the monitor upwards at an angle of -1° to 16°. ( ±1.0°)

Attaching a Base

This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.

Note

The VESA dimensions given above are an example. The VESA dimensions may dier depending on

the product.

Connections

A. Monitor

B. Mounting interface pad (Sold separately)

1. Turn o your monitor and unplug its power cord.

2. Lay the LCD monitor face-down on a at surface with a cushion beneath it to protect the screen.

3. Remove the stand from the LCD monitor.

4. Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with

four screws that came with the arm-type base, wall mount hanger or other base.

• Do not use screws longer than the standard dimension, as they may damage the

inside of the Monitor.

• For wall mounts that do not comply with VESA standard screw specications,

the length of the screws may dier depending on their specications.

• Do not use screws that do not comply with the VESA standard screw specica-

tions.

Do not fasten the screws too tightly, as this may damage the product or cause the

product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

• Samsung is not liable for product damage or personal injury when a non-VESA

or non-specied wall mount is used or the consumer fails to follow the product

installation instructions.

• To mount the monitor on a wall, you should purchase the wall mounting kit that

allows you to mount the monitor at least 10 cm away from the wall surface.

• Contact the nearest Samsung Service Center for more information. Samsung

Electronics will not be responsible for damages caused by using a base other than

those specied.

• Please use Wall Mount according to the International standards.

Connections

Using the Software

Monitor Driver

Note

When prompted by the operating system for the monitor driver, insert the CD-ROM

included with this monitor. Driver installation is slightly dierent from one operating

system to another. Follow the directions appropriate for the operating system you

have.

Prepare a blank disk and download the driver program le at the Internet web site

shown here.

Internet web site :

http://www.samsung.com/ (Worldwide)

Installing the Monitor Driver (Automatic)

1. Insert CD into the CD-ROM drive.

2. Click "Windows".

3. Choose your monitor model in the model list, then click the "OK" button.

4. If you can see following message window, then click the "Continue Anyway" button. Then click

"OK" button (Microsoft® Windows® XP/2000 Operating System).

Note

This monitor driver is under certifying MS logo, and this installation doesn't damage your system.

The certied driver will be posted on Samsung Monitor homepage.

http://www.samsung.com/

Installing the Monitor Driver (Manual)

Microsoft® Windows Vista™‚ Operating System

1. Insert your Manual CD into your CD-ROM drive.

2. Click (Start) and "Control Panel". Then, double-click on "Appearance and Personalization".

3. Click "Personalization" and then "Display Settings".

4. Click "Advanced Settings...".

5. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the

conguration for your monitor is completed. The monitor can be used as is.

If the message "Windows needs..." is displayed, as shown in the gure below, click "Continue".

Using the Software

Note

This monitor driver is under certifying MS logo, and this installation doesn't damage your system.

The certied driver will be posted on Samsung Monitor homepage.

6. Click "Update Driver..." in the "Driver" tab.

7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a

list of device drivers on my computer".

8. Click "Have Disk...” and select the folder (for example, D:\Drive) where the driver setup le is

located, and click "OK".

Using the Software

9. Select the model that matches your monitor from the list of monitor models on the screen, and

click "Next".

10. Click "Close" "Close" "OK" "OK" on the following screens displayed in sequence.→ → →

Microsoft® Windows® XP Operating System

Using the Software

1. Insert CD into the CD-ROM drive.

2. Click "Start" "Control Panel" then click the "Appearance and Themes" icon.→

3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".

4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.

5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.

6. Select "Don't search, I will..." then click "Next" and then click "Have disk".

Using the Software

7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model

list and click the "Next" button.

8. If you can see following message window, then click the "Continue Anyway" button. Then click

"OK" button.

Note

This monitor driver is under certifying MS logo, and this installation doesn't damage your system.

The certied driver will be posted on Samsung Monitor homepage.

http://www.samsung.com/

9. Click the "Close" button then click "OK" button continually.

Using the Software

10. Monitor driver installation is completed.

Microsoft® Windows® 2000 Operating System

When you can see "Digital Signature Not Found" on your monitor, follow these steps.

1. Choose "OK" button on the "Insert disk" window.

2. Click the "Browse" button on the "File Needed" window.

3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.

How to install

1. Click "Start", "Setting", "Control Panel".

2. Double click the "Display" icon.

3. Select the "Settings" tab and click "Advanced Properties" button.

4. Choose "Monitor".

Case1 : If the "Properties" button is inactive, it means your monitor is properly congured. Please

stop installation

Case2 : If the "Properties" button is active, click the "Properties" button then follow next steps

continually.

5. Click "Driver" and then click on "Update Driver..." then click on the "Next" button.

6. Choose "Display a list of the known drivers for this device so that I can choose a specic driver"

then click "Next" and then click "Have disk".

7. Click the "Browse" button then choose A:(D:\Driver).

8. Click the "Open" button, then click "OK" button.

9. Choose your monitor model and click the "Next" button then click "Next" button.

10. Click the "Finish" button then the "Close" button.

If you can see the "Digital Signature Not Found" window then click the "Yes" button. And click

the "Finish" button then the "Close" button.

Microsoft® Windows® Millennium Operating System

1. Click "Start", "Setting", "Control Panel".

2. Double click the "Display" icon.

3. Select the "Settings" tab and click "Advanced Properties" button.

Using the Software

4. Select the "Monitor" tab.

5. Click the "Change" button in the "Monitor Type" area.

6. Choose "Specify the location of the driver".

7. Choose "Display a list of all the driver in a specic location..." then click "Next" button.

8. Click the "Have Disk" button.

9. Specify A:\(D:\driver) then click "OK" button.

10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to

your computer and click "OK".

11. Continue choosing "Close" button and "OK" button until you close the Display Properties dia-

logue box.

Microsoft® Windows® NT Operating System

1. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon.

2. In Display Registration Information window, click Settings Tab and then click "All Display

Modes".

3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and

then click "OK".

4. Click "Apply" button if you see the screen working normally after clicking "Test". If the screen

is not normal, change to a dierent mode (lower mode of resolution, colors or frequency).

Note

If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by

referring to the Preset Timing Modes in the user guide.

Linux Operating System

To execute X-Window, you need to make the X86Cong le, which is a type of system setting le.

1. Press "Enter" at the rst and the second screen after executing the X86Cong le.

2. The third screen is for setting your mouse.

3. Set a mouse for your computer.

4. The next screen is for selecting a keyboard.

5. Set a Keyboard for your computer.

6. The next screen is for setting your monitor.

7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.)

8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)

9. Enter the model name of your monitor. This information will not aect the actual execution of

X-Window.

10. You have nished setting up your monitor. Execute X-Window after setting other requested

hardware.

Using the Software

Natural Color

Natural Color Software Program

One of the recent problems in using a computer is that the color of the images printed out by a printer

or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor.

The Natural Color S/W is the very solution for this problem. It is a color administration system de-

veloped by Samsung Electronics in association with Korea Electronics & Telecommunications

Research Institute (ETRI). This system is available only for Samsung monitors and makes the color

of the images on the monitor the same as the printed or scanned images. For more information, refer

to Help (F1) in the software program.

The Natural Color is provided online. You can download it from the website below and install;

http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_down-

load.html

MagicTune™

Installation

1. Insert the installation CD into the CD-ROM drive.

2. Click the MagicTune™ installation le.

Note

If the popup window to install the software for the main screen is not displayed, proceed with the

installation using the MagicTune executable le on the CD.

3. Select installation Language, Click "Next".

4. When the Installation Shield Wizard window appears, click "Next".

5. Select "I agree to the terms of the license agreement" to accept the terms of use.

6. Choose a folder to install the MagicTune™ program.

7. Click "Install".

8. The "Installation Status" window appears.

9. Click "Finish".

Using the Software

10. When the installation is complete, the MagicTune™ executable icon appears on your desktop.

Double-click the icon to start the program.

MagicTune™ execution icon may not appear depending on specication of computer sys-

tem or monitor. If that happens, press F5 Key.

Installation Problems

The installation of MagicTune™ can be aected by such factors as the video card, motherboard and

the network environment.

System Requirements

• Windows 2000

• Windows XP Home Edition

• Windows XP Professional

• Windows Vista™

It is recommended using MagicTune™ in Windows

® 2000 or later.

Hardware

• 32 MB Memory above

• 60 MB Hard disk space above

For more information, visit the MagicTune™ website.

Uninstall

The MagicTune™ program can be removed only by using the "Add or Remove Programs" option of

the Windows® Control Panel.

Perform the following steps remove MagicTune™.

1. Go to [Task Tray] → [Start] → [Settings] and select [Control Panel] in the menu. If the program

runs on Windows® XP, go to [Control Panel] in the [Start] menu.

2. Click the "Add or Remove Programs" icon in Control Panel.

3. In the "Add or Remove Programs" screen, scroll down to nd "MagicTune™." Click on it to

highlight it.

4. Click the "Change/Remove" button to remove the program.

5. Click "Yes" to begin the uninstall process.

6. Wait until the "Uninstall Complete" dialog box appears.

Note

Visit the MagicTune™ for technical support for MagicTune™, FAQs (questions and answers)website

and software upgrades.

Using the Software

MultiScreen

Note

The software may not be supported depending on the model.

Installation

1. Insert the installation CD into the CD-ROM drive.

2. Click the MultiScreen installation le.

Note

If the popup window to install the software for the main screen is not displayed, proceed with the

installation using the MultiScreen executable le on the CD.

3. When the Installation Shield Wizard window appears, click "Next".

4. Select "I agree to the terms of the license agreement" to accept the terms of use.

5. Choose a folder to install the MultiScreen‚ program.

6. Click "Install".

7. The "Installation Status" window appears.

8. Click "Finish".

9. When the installation is complete, the Multiscreen executable icon appears on your desktop.

Double-click the icon to start the program.

Multiscreen execution icon may not appear depending on specication of computer system

or monitor. If that happens, press F5 Key.

Installation Problems

The installation of MultiScreen can be aected by such factors as the video card, motherboard and the

network environment.

Using the Software

System Requirements

• Windows 2000

• Windows XP Home Edition

• Windows XP Professional

• Windows Vista™

It is recommended using MultiScreen in Windows

® 2000 or later.

Hardware

• 32 MB Memory above

• 60 MB Hard disk space above

Uninstall

The Multiscreen program can be removed only by using the "Add or Remove Programs" option of the

Windows® Control Panel.

Perform the following steps remove Multiscreen.

Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program".

Select Multiscreen from the list and then click the "Add/Delete" button.

Using the Software

Adjusting the Monitor

Direct Functions

AUTO

When the 'AUTO' button is pressed, the auto adjustment screen appears as shown in the animated

screen on the center.

Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. The values of Fine,

Coarse and Position are adjusted automatically.

(Available in Analog mode only, so “AUTO” icon of OSD is gray in Digital mode.)

If auto adjustment does not work properly, press 'AUTO' button again to adjust picture with more

accuracy.

If you change resolution in the control panel, auto function will be executed automatically.

OSD Lock & Unlock

When pressing the AUTO button after locking the OSD

When pressing the MENU button after locking the OSD

This is the function that locks the OSD in order to keep the current states of settings or prevent others

from adjusting the current settings.

Lock : Hold down the MENU button for more than ve (5) seconds to activate the OSD adjustment

lock function.

Unlock : Hold down the MENU button for more than ve (5) seconds to deactivate the OSD adjustment

lock function.

Note

Though the OSD adjustment lock

function is activated, you can still

adjust the brightness and contrast,

and adjust Customized Key

( ) using the Direct button.

Customized key

You can customize key assignment for the Custom button according to your preferences.

SIZE &

POSI-

TION

H-Posi-

tion

V-Position Image Size Menu H-Po-

sition

Menu V-Po-

sition

SET-

UP&RE-

SET

Reset Menu Trans-

parency

Language Off Timer

On/Off

Off Timer

Setting

Auto

Source

PC/AV Mode Display

Time

Customized

Key

INFOR-

MATION

Picture

Menu Description

Brightness (Not available in MagicBright mode of Dynamic Contrast.)

You can use the on-screen menus to change the brightness according

to personal preference.

The larger the number, the brighter the screen. The smaller the number,

the darker the screen.

Contrast (Not available in MagicBright mode of Dynamic Contrast.)

You can use the on-screen menus to change the contrast according to

personal preference.

The larger the number, the brighter the screen. The smaller the number,

the darker the screen.

( Not available in mode of and . )MagicColor Full Intelligent

Sharpness Changes the clearance of image.

The larger the number, the clearer the screen. The smaller the number,

the less clear the screen.

( Not available in mode of and . )MagicColor Full Intelligent

MagicBright Push the button to circle through available precongured modes.

MagicBright is a new feature providing optimum viewing environment

depending on the contents of the image you are watching. Currently

seven dierent modes are available: Custom, , , Text Internet Game,

Sport, Movie and . Each mode has its own pre-Dynamic Contrast

Adjusting the Monitor

Menu Description

congured brightness value. You can easily select one of seven settings

by simply pressing control button.Customized Key

•Custom

Although the values are carefully chosen by our engineers, the pre-

congured values may not be comfortable to your eyes depending

on your taste.

If this is the case, adjust the brightness and contrast by using the

OSD menu.

•Text

For documentations or works involving heavy text.

•Internet

For working with a mixture of images such as texts and graphics.

•Game

For watching motion pictures such as a game.

•Sport

For watching motion pictures such as a sport.

•Movie

For watching motion pictures such as a DVD or Video CD.

•Dynamic Contrast

Dynamic Contrast is to automatically detect distribution of input-

ted visual signal and adjust to create optimum contrast.

Coarse Removes noise such as vertical stripes.

The larger the number, the more the screen increases vertically. The

smaller the number, the more the screen decreases vertically.

Coarse adjustment may move the screen image area. You may relocate

it to the center using the horizontal control menu.

(Available in mode only)Analog

Fine Removes noise such as horizontal stripes.

If the noise persists even after tuning, repeat it after adjusting theFine

frequency (clock speed).

(Available in mode only)Analog

Adjusting the Monitor

Color

Menu Description

MagicColor MagicColor is a new technology that Samsung has exclusively devel-

oped to improve digital image and to display natural color more clearly

without disturbing image quality.

• - Returns to the original mode.Off

• Demo - The screen before applying MagicColor appears on the

right and the screen after applying appears on the left.MagicColor

• Full - Displays not only vivid natural color but also more realistic

natural skin color with clearness.

• - Displays vivid natural color with clearness.Intelligent

Red RedAdjusts individual color balance.

The larger the number, the closer it is to red.

( Not available in mode of and . )MagicColor Full Intelligent

Green GreenAdjusts individual color balance.

The larger the number, the closer it is to green.

( Not available in mode of and . )MagicColor Full Intelligent

Blue BlueAdjusts individual color balance.

The larger the number, the closer it is to blue.

( Not available in mode of and . )MagicColor Full Intelligent

Color Tone The tone of the color can be changed and one of four modes can be

selected.

( Not available in mode of and . )MagicColor Full Intelligent

• - Makes whites bluish.Cool

• - Keeps whites white.Normal

• - Makes whites reddish.Warm

• Custom - Select this mode when you want to adjust the image ac-

cording to your preferences.

Adjusting the Monitor

Menu Description

Color Effect You can change the overall mood by changing the screen colors.

( Not available in mode of and . )MagicColor Full Intelligent

•Off - This applies an achromatic color to the screen to adjust the

screen eects.

• - The default colors of black and white are displayed.Grayscale

•Green - This applies the green color eect to a black and white

screen.

•Aqua - This applies the aqua color eect to a black and white

screen.

•Sepia - This applies the Sepia color eect to a black and white

screen.

Gamma Gamma correction changes the luminance of the colors with inter-

mediate luminance.

• : Sets the screen to the default brightness.Mode 1

• : Sets the screen to bright.Mode 2

• : Sets the screen to dim.Mode 3

SIZE & POSITION

Menu Description

H-Position Changes the horizontal position of the monitor's entire display.

You can move the position of the screen to the left and right by pressing

the and buttons, respectively.

(Available in mode only)Analog

Note

When TV signal is input in AV mode ,select “ “to adjustScreen Fit

horizontal position in 0-6 levels.

V-Position Changes the vertical position of the monitor's entire display.

You can move the position of the screen downwards and upwards by

pressing the and buttons, respectively.

Adjusting the Monitor

Menu Description

(Available in mode only)Analog

Note

When TV signal is input in AV mode ,select “ “to adjustScreen Fit

vertical position in 0-6 levels.

Image Size Note

Supplied for the wide models only such as 16:9 or 16:10.

You can change the size of the screen displayed on your monitor.

PC signals

• Auto - The screen is displayed in accordance with the screen aspect

ratio of the input signals.

• Wide - A full screen is displayed regardless of the screen aspect

ratio of the input signals.

Note

• Signals not available in the standard mode table are not supported.

• If the wide screen which is the optimal resolution for the monitor

is set on your PC, this function is not performed.

AV signals

• 4 : 3 - Sets the picture to 4:3 normal mode.

• - Sets the picture to 16:9 wide mode.16 : 9

• Screen Fit- Use the function to see the full image without any cutoff

when DVI (480p/576p/720p/1080i/1080p) signals are input.

Note

It can only be selected if an external input is connected to the DVI

terminal and the 'PC/AV Mode' is set to 'AV'.

• - Sets the picture to 4:3 normal mode.4 : 3

• -Sets the picture to 16:10 wide mode.Wide

• Screen Fit- Use the function to see the full image without any cutoff

when DVI (480p/576p/720p/1080i/1080p) signals are input.

Note

• It can only be selected if an external input is connected to the DVI

terminal and the 'PC/AV Mode' is set to 'AV'.

• When the panel is of 16:10,the screen size options include

“4:3”,”wide “,”Screen fit“.

Adjusting the Monitor

SETUP&RESET

Menu Description

Reset Reverts the product settings to factory defaults.

• Yes

• No

Menu Transpar-

ency

Change the transparency of the background of the OSD.

• Off : The menus are displayed in the normal way (non-transpar-

ently).

• : The menus are displayed transparently.On

Language You can select the language used to display the menus.

You can choose one of nine languages.

Note

The language chosen affects only the language of the OSD. It has no

effect on any software running on the computer.

Off Timer On/

Off

You can enable or disable the Off Time function.

• Off

• On

Off Timer Setting The monitors will turn off automatically at the specified time.

Auto Source Select Auto Source for the monitor to automatically select the signal

source.

• Auto

• Manual

Note

Not applicable to analogue (D-SUB)-or-digital (DVI)-dedicated mod-

els.

Adjusting the Monitor

Menu Description

PC/AV Mode This function allows the screen to be displayed at the optimal quality

in accordance with the size of the screen when a 480P, 576P, 720P,

1080i, or 1080P video signal is input in DVI mode.

Set to "PC" when connected to a PC, Set to "AV" when connected to

an AV device.

If not set to "AV", the screen may not be displayed normally.

(Unavailable in mode)Analog

Note

Supplied for the wide models only such as 16:9 or 16:10.

Display Time The menu will be automatically turned off if no adjustments are made

for a certain time period.

You can set the amount of time the menu will wait before it is turned

off.

• 5 sec

• 10 sec

• 20 sec

• 200 sec

Customized Key You can specify a function which will be activated when the Custom-

ized Key ( )is pressed.

INFORMATION

Menu Description

INFORMA-

TION

Shows a video source, display mode on the OSD screen.

Note

For models with an Analog interface only, “Analog/Digital“is not

shown in the”Information”.

Adjusting the Monitor

Troubleshooting

Self-Test Feature Check

Note

Your monitor provides a self test feature that allows you to check whether your monitor is functioning

properly.

Self-Test Feature Check

1. Turn off both your computer and the monitor.

2. Unplug the video cable from the back of the computer.

3. Turn on the monitor.

If the monitor is functioning properly, you will see a box in the illustration below.

Note

For models with an Analog interface only, “Analog/Digital” is not shown in the Warning Message

OSD.

This box appears during normal operation if the video cable becomes disconnected or damaged.

4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the

monitor.

If your monitor screen remains blank after using the previous procedure, check your video controller

and computer system; your monitor is functioning properly.

Warning Messages

If there is something wrong with the input signal, a message appears on the screen or the screen goes

blank although the power indicator LED is still on. The message may indicate that the monitor is out

of scan range or that you need to check the signal cable.

Note

For models with an Analog interface only, “Analog/Digita” is not shown in the Warning Message

OSD.

(Refer to the Preset Timing Modes)

If the initial screen (the login screen) does not appear, contact the Service Center or your deal-

er.

Q: Can you see " ", " **** x **** 60 Hz" on the screen?Not Optimum Mode Recommended Mode

A: You can see this message when the signal from the video card exceeds the maximum resolution

and frequency that the monitor can handle properly.

A: Adjust the maximum resolution and frequency that the monitor can handle properly.

A: ", "If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode Recommended Mode ****

x **** 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly

but the " ", "Not Optimum Mode Recommended Mode **** x **** 60 Hz" message appears

for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

Q: There is no image on the screen. Is the power indicator on the monitor blinking at 1 second

intervals?

A: The monitor is in PowerSaver mode.

A: Press a key on the keyboard to activate the monitor and restore the image on the screen.

A: If there is still no image, press the ' ' button. Then press any key on the keyboard again to

activate the monitor and restore the image on the screen.

Q: Connected using the DVI cable?

A: You may get a blank screen if you boot the system before you connect the DVI cable, or dis-

connect and then reconnect the DVI cable while the system is running as certain types of graphic

cards do not send out video signals. Connect the DVI cable and then reboot the system.

I cannot see the On Screen Display.

Q: Have you locked the On Screen Display (OSD) Menu to prevent changes?

A: Unlock the OSD by pressing the [MENU/ ] button for at least 5 seconds.

The screen shows strange colors or just black and white.

Q: Is the screen displaying only one color as if looking at the screen through a cellophane paper?

A: Check the signal cable connection.

A: Make sure the video card is fully inserted in its slot.

Q: Have the screen colors become strange after running a program or due to a crash between ap-

plications?

A: Reboot the computer.

Q: Has the video card been set properly?

A: Set the video card by referring to the video card manual.

Troubleshooting

A: Move your mouse or press any key to display the screen again.

Problems related to Audio.

Q: No sound.

A: Ensure that the audio cable is rmly connected to both the audio-in port on your monitor and

the audio-out port on your sound card.

(Refer to Connecting Cables).

Check the volume level.

Q: Sound level is too low.

A: Check the volume level.

If the volume is still too low after turning the control to its maximum, check the volume control

on the computer sound card or software program.

Check when MagicTune™ does not function properly.

Q: MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug and Play.

A: To check whether your PC is available for MagicTune™ feature, follow the steps below (When

Windows is XP);

Control Panel Performance and Maintenance System → → → Hardware → Device Manager

→ → Monitors After deleting Plug and Play monitor, nd 'Plug and Play monitor' by searching

new Hardware.

A: MagicTune™ is an additional software for the monitor. Some graphic cards may not support

your monitor. When you have a problem with the graphic card, visit our website to check the

compatible graphic card list provided.

http://www.samsung.com/monitor/magictune

MagicTune™ doesn't work properly.

Q: Have you changed your PC or video graphic card?

A: http://www.samsung.com/mon-Download the latest program. The program can be downloaded

itor/magictune

Q: Did you install the program?

A: Reboot the computer after installing the program for the rst time. If a copy of the program is

already installed, remove it, reboot the computer, and then install the program again. You need

to reboot the computer for it to operate normally after installing or removing the program.

Note

Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.

Check the following items if there is trouble with the monitor.

Check if the power cord and the video cables are properly connected to the computer.

Check if the computer beeps more than 3 times when booting.

(If it does, request an a service for the main board of the computer.)

Troubleshooting

If you installed a new video card or if you assembled the PC, check if the installed the adapter(video)

driver and the monitor driver.

Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz.

(Do not exceed 75 Hz when using the maximum resolution.)

If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove

the Display Adapter in the "Control Panel System Device Administrator" and then reboot the→ →

computer to reinstall the adapter (video) driver.

Note

If problems repeatedly occur, contact an authorized service center.

Q & A

Q: How can I change the frequency?

A: The frequency can be changed by reconguring the video card.

A: Note that video card support can vary, depending on the version of the driver used. (Refer to the

computer or the video card manual for details.)

Q: How can I adjusts the resolution?

A: Windows XP:

Set the resolution in the Control Panel Appearance and Themes Display Settings.→ → →

A: Windows ME/2000:

Set the resolution in the Control Panel Display Settings.→ →

* Contact the video card manufacturer for details.

Q: How can I set the Power Saving function?

A: Windows XP:

Set the resolution in the Control Panel → Appearance and Themes → Display Screen Saver.→

Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-

ual).

A: Windows ME/2000:

Set the resolution at the Control Panel Display Screen Saver.→ →

Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-

ual).

Q: How can I clean the outer case/LCD Panel?

A: Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning

solution or plain water.

Do not leave any detergent or scratches on the case. Do not let any water enter the monitor.

Troubleshooting

Note

Before calling for assistance, check the information in this section to see if you can remedy any prob-

lems yourself. If you do need assistance, please call the phone number on the Information section or

contact your dealer.

Troubleshooting

Specifications

General

Model Name SyncMaster 633NW

LCD Panel

Size 15.6 inch (39 cm)

Display area 344.232 mm(H) x 193.536 mm(V)

Pixel Pitch 0.252 mm(H) x 0.252 mm(V)

Synchronization

Horizontal 30 ~ 61 kHz

Vertical 56 ~ 75 Hz

Display Color

16.7 M

Resolution

Optimum resolution 1360 x 768@60 Hz

Maximum resolution 1360 x 768@60 Hz

Input Signal, Terminated

RGB Analog,

0.7 Vp-p ± 5 %

Separate H/V sync, Composite, SOG

TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V)

Maximum Pixel Clock

90 MHz (Analog)

Power Supply

AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz

Signal Cable

15pin - to - 15pin D-sub cable, Detachable, 1500 +/- 20 mm

Dimensions (W x H x D) / Weight (Simple Stand)

386 x 264.5 x 67.2 mm (15.2 x 10.4 x 2.6 inch) (Without Stand)

386 x 315.8 x 186.6 mm (15.2 x 12.4 x 7.3 inch) (With Stand)/ 2.55 kg (5.62 lbs)

VESA Mounting Interface

75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating

Temperature : 50°F ~ 104°F (10°C ~ 40°C)

Humidity : 20 % ~ 80 %, non-condensing

Storage

Temperature : -4°F ~ 140°F (-20°C ~ 60°C)

Humidity : 10 % ~ 80 %, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the

computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor

installation will proceed automatically, unless the user wishes to select alternate settings.

Note

Design and specifications are subject to change without prior notice.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas

including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)

Dot Acceptable

TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)

above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright

sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.

Specifications

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor

to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal

operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or

when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in

your computer. Use the software utility installed on your computer to set up this feature.

State Normal Operation Power saving mode Power off (Power button)

EPA/ENERGY 2000

Power Indicator On Blinking Off

Power Consumption 18 watts Less than 1 watts Less than 1 watts

This monitor is EPA ENERGY STAR® compliant and ENERGY 2000 compliant when used with

a computer equipped with VESA DPM functionality.

As an ENERGY STAR

® Partner, SAMSUNG has determined that this product meets the

ENERGY STAR

® guidelines for energy efficiency.

Specifications

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted

automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual

and adjusts the screen as follows.

Display Mode

Horizontal

Frequency

(kHz)

Vertical

Frequency (Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

IBM, 640 x 350 31.469 70.086 25.175 +/-

IBM, 640 x 480 31.469 59.940 25.175 -/-

IBM, 720 x 400 31.469 70.087 28.322 -/+

MAC, 640 x 480 35.000 66.667 30.240 -/-

MAC, 832 x 624 49.726 74.551 57.284 -/-

VESA, 640 x 480 37.861 72.809 31.500 -/-

VESA, 640 x 480 37.500 75.000 31.500 -/-

VESA, 800 x 600 35.156 56.250 36.000 +/+

VESA, 800 x 600 37.879 60.317 40.000 +/+

VESA, 800 x 600 48.077 72.188 50.000 +/+

VESA, 800 x 600 46.875 75.000 49.500 +/+

VESA, 1024 x 768 48.363 60.004 65.000 -/-

VESA, 1024 x 768 56.476 70.069 75.000 -/-

VESA, 1024 x 768 60.023 75.029 78.750 +/+

VESA, 1360 X 768 47.712 60.015 85.500 +/+

Horizontal Frequency

The time to scan one line connecting the right edge to the left edge of the

screen horizontally is called the Horizontal Cycle and the inverse number of

the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz

Vertical Frequency

Like a fluorescent lamp, the screen has to repeat the same image many times

per second to display an image to the user. The frequency of this repetition is

called the Vertical Frequency or Refresh Rate. Unit: Hz

Specifications

General

Model Name SyncMaster 733A

LCD Panel

Size 17 inch (43 cm)

Display area 337.920 mm (H) x 270.336 mm (V)

Pixel Pitch 0.264 mm (H) x 0.264 mm (V)

Synchronization

Horizontal 30 ~ 81 kHz

Vertical 56 ~ 75 Hz

Display Color

16.7M

Resolution

Optimum resolution 1280 x 1024@60 Hz

Maximum resolution 1280 x 1024@75 Hz

Input Signal, Terminated

RGB Analog

0.7 Vp-p ± 5 %

Separate H/V sync, Composite, SOG

TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V)

Maximum Pixel Clock

135 MHz (Analog)

Power Supply

AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz

Signal Cable

15pin - to - 15pin D-sub cable, Detachable

Dimensions (W x H x D) / Weight (Simple Stand)

380.6 x 349 x 72.3 mm / 15.0 x 13.7 x 2.8 inch (Without Stand)

380.6 x 397.1 x 200 mm / 15.0 x 15.6 x 7.9 inch (With Stand), 3.8 kg / 8.4 lbs

VESA Mounting Interface

75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating

Temperature : 50°F ~ 104°F (10°C ~ 40°C)

Humidity : 10 % ~ 80 %, non-condensing

Storage

Temperature : -4°F ~ 113°F (-20°C ~ 45°C)

Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the

computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor

installation will proceed automatically, unless the user wishes to select alternate settings.

Note

Design and specifications are subject to change without prior notice.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas

including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)

Dot Acceptable

TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)

above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright

sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.

Specifications

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor

to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal

operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or

when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in

your computer. Use the software utility installed on your computer to set up this feature.

State Normal Operation Power saving mode Power off (Power button)

EPA/ENERGY 2000

Power Indicator On Blinking Off

Power Consumption 30 watts Less than 1 watts Less than 1 watts

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with

a computer equipped with VESA DPM functionality.

As an ENERGY STAR

® Partner, SAMSUNG has determined that this product meets the

ENERGY STAR

® guidelines for energy efficiency.

Specifications

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted

automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual

and adjusts the screen as follows.

Display Mode

Horizontal

Frequency

(kHz)

Vertical

Frequency (Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

IBM，640 x 350 31.469 70.086 25.175 +/-

IBM，640 x 480 31.469 59.940 25.175 -/-

IBM，720 x 400 31.469 70.087 28.322 -/+

MAC，640 x 480 35.000 66.667 30.240 -/-

MAC，832 x 624 49.726 74.551 57.284 -/-

MAC，1152 x 870 68.681 75.062 100.000 -/-

VESA，640 x 480 37.861 72.809 31.500 -/-

VESA，640 x 480 37.500 75.000 31.500 -/-

VESA，800 x 600 35.156 56.250 36.000 +/+

VESA，800 x 600 37.879 60.317 40.000 +/+

VESA，800 x 600 48.077 72.188 50.000 +/+

VESA，800 x 600 46.875 75.000 49.500 +/+

VESA，1024 x 768 48.363 60.004 65.000 -/-

VESA，1024 x 768 56.476 70.069 75.000 -/-

VESA，1024 x 768 60.023 75.029 78.750 +/+

VESA，1152 x 864 67.500 75.000 108.000 +/+

VESA, 1280 X 960 60.000 60.000 108.000 +/+

VESA, 1280 X 1024 63.981 60.020 108.000 +/+

VESA, 1280 X 1024 79.976 75.025 135.000 +/+

VESA, 1280 X 800 49.702 59.810 83.500 -/+

Horizontal Frequency

The time to scan one line connecting the right edge to the left edge of the

screen horizontally is called the Horizontal Cycle and the inverse number of

the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz

Vertical Frequency

Like a fluorescent lamp, the screen has to repeat the same image many times

per second to display an image to the user. The frequency of this repetition is

called the Vertical Frequency or Refresh Rate. Unit: Hz

Specifications

General

Model Name SyncMaster 733APLUS

LCD Panel

Size 17 inch (43 cm)

Display area 337.920 mm (H) x 270.336 mm (V)

Pixel Pitch 0.264 mm (H) x 0.264 mm (V)

Synchronization

Horizontal 30 ~ 81 kHz

Vertical 56 ~ 75 Hz

Display Color

16.7M

Resolution

Optimum resolution 1280 x 1024@60 Hz

Maximum resolution 1280 x 1024@75 Hz

Input Signal, Terminated

RGB Analog

0.7 Vp-p ± 5 %

Separate H/V sync, Composite, SOG

TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V)

Maximum Pixel Clock

135 MHz (Analog)

Power Supply

AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz

Signal Cable

15pin - to - 15pin D-sub cable, Detachable

Dimensions (W x H x D) / Weight (Simple Stand)

380.6 x 349 x 72.3 mm / 15.0 x 13.7 x 2.8 inch (Without Stand)

380.6 x 397.1 x 200 mm / 15.0 x 15.6 x 7.9 inch (With Stand), 3.8 kg / 8.4 lbs

VESA Mounting Interface

75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating

Temperature : 50°F ~ 104°F (10°C ~ 40°C)

Humidity : 10 % ~ 80 %, non-condensing

Storage

Temperature : -4°F ~ 113°F (-20°C ~ 45°C)

Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the

computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor

installation will proceed automatically, unless the user wishes to select alternate settings.

Note

Design and specifications are subject to change without prior notice.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas

including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)

Dot Acceptable

TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)

above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright

sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.

Specifications

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor

to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal

operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or

when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in

your computer. Use the software utility installed on your computer to set up this feature.

State Normal Operation Power saving mode Power off (Power button)

EPA/ENERGY 2000

Power Indicator On Blinking Off

Power Consumption 30 watts Less than 1 watts Less than 1 watts

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with

a computer equipped with VESA DPM functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the

ENERGY STAR® guidelines for energy efficiency.

Specifications

General

Model Name SyncMaster 733N

LCD Panel

Size 17 inch (43 cm)

Display area 337.920 mm (H) x 270.336 mm (V)

Pixel Pitch 0.264 mm (H) x 0.264 mm (V)

Synchronization

Horizontal 30 ~ 81 kHz

Vertical 56 ~ 75 Hz

Display Color

16.7M

Resolution

Optimum resolution 1280 x 1024@60 Hz

Maximum resolution 1280 x 1024@75 Hz

Input Signal, Terminated

RGB Analog

0.7 Vp-p ± 5 %

Separate H/V sync, Composite, SOG

TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V)

Maximum Pixel Clock

135 MHz (Analog)

Power Supply

AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz

Signal Cable

15pin - to - 15pin D-sub cable, Detachable

Dimensions (W x H x D) / Weight (Simple Stand)

380.6 x 349 x 72.3 mm / 15.0 x 13.7 x 2.8 inch (Without Stand)

380.6 x 397.1 x 200 mm / 15.0 x 15.6 x 7.9 inch (With Stand), 3.8 kg / 8.4 lbs

VESA Mounting Interface

75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating

Temperature : 50°F ~ 104°F (10°C ~ 40°C)

Humidity : 10 % ~ 80 %, non-condensing

Storage

Temperature : -4°F ~ 113°F (-20°C ~ 45°C)

Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the

computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor

installation will proceed automatically, unless the user wishes to select alternate settings.

Note

Design and specifications are subject to change without prior notice.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas

including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)

Dot Acceptable

TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)

above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright

sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.

Specifications

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor

to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal

operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or

when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in

your computer. Use the software utility installed on your computer to set up this feature.

State Normal Operation Power saving mode Power off (Power button)

EPA/ENERGY 2000

Power Indicator On Blinking Off

Power Consumption 30 watts Less than 1 watts Less than 1 watts

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with

a computer equipped with VESA DPM functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the

ENERGY STAR® guidelines for energy efficiency.

Specifications

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor

to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal

operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or

when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in

your computer. Use the software utility installed on your computer to set up this feature.

State Normal Operation Power saving mode Power off (Power button)

EPA/ENERGY 2000

Power Indicator On Blinking Off

Power Consumption 30 watts Less than 1 watts Less than 1 watts

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with

a computer equipped with VESA DPM functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the

ENERGY STAR® guidelines for energy efficiency.

Specifications

General

Model Name SyncMaster 733NW

LCD Panel

Size 17 inch (43 cm)

Display area 367.2 mm(H) x 229.5 mm(V)

Pixel Pitch 0.255 mm(H) x 0.255 mm(V)

Synchronization

Horizontal 30 ~ 81 kHz

Vertical 56 ~ 75 Hz

Display Color

16.2 M

Resolution

Optimum resolution 1440 x 900@60 Hz

Maximum resolution 1440 x 900@75 Hz

Input Signal, Terminated

RGB Analog,

0.7 Vp-p ± 5 %

Separate H/V sync, Composite, SOG

TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V)

Maximum Pixel Clock

136.75 MHz (Analog)

Power Supply

AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz

Signal Cable

15pin - to - 15pin D-sub cable, Detachable, 1500 +/- 20 mm

Dimensions (W x H x D) / Weight (Simple Stand)

410.9 x 302.5 x 64.5 mm (16.2 x 11.9 x 2.5 inch) (Without Stand)

410.9 x 351.2 x 187 mm (16.2 x 13.8 x 7.4 inch) (With Stand)/ 2.8 kg (6.17 lbs)

VESA Mounting Interface

75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating

Temperature : 32 °F ~ 104°F (0°C ~ 40°C)

Humidity : 20 % ~ 80 %, non-condensing

Temperature : -4°F ~ 140°F (-20°C ~ 60°C)

Specifications

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor

to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal

operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or

when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in

your computer. Use the software utility installed on your computer to set up this feature.

State Normal Operation Power saving mode Power off (Power button)

EPA/ENERGY 2000

Power Indicator On Blinking Off

Power Consumption 20 watts Less than 1 watts Less than 1 watts

This monitor is EPA ENERGY STAR® compliant and ENERGY 2000 compliant when used with

a computer equipped with VESA DPM functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the

ENERGY STAR® guidelines for energy efficiency.

Specifications

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted

automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual

and adjusts the screen as follows.

Display Mode

Horizontal

Frequency

(kHz)

Vertical

Frequency (Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

IBM, 720 x 400 31.469 70.087 28.322 -/+

MAC, 640 x 480 35.000 66.667 30.240 -/-

MAC, 832 x 624 49.726 74.551 57.284 -/-

MAC, 1152 x 870 68.681 75.062 100.000 -/-

VESA, 640 x 480 31.469 59.940 25.175 -/-

VESA, 640 x 480 37.861 72.809 31.500 -/-

VESA, 640 x 480 37.500 75.000 31.500 -/-

VESA, 800 x 600 35.156 56.250 36.000 +/+

VESA, 800 x 600 37.879 60.317 40.000 +/+

VESA, 800 x 600 48.077 72.188 50.000 +/+

VESA, 800 x 600 46.875 75.000 49.500 +/+

VESA, 1024 x 768 48.363 60.004 65.000 -/-

VESA, 1024 x 768 56.476 70.069 75.000 -/-

VESA, 1024 x 768 60.023 75.029 78.750 +/+

VESA, 1152 x 864 67.500 75.000 108.000 +/+

VESA, 1280 x 800 49.702 59.810 83.500 +/+

VESA, 1280 X 960 60.000 60.000 108.000 +/+

VESA, 1280 X 1024 63.981 60.020 108.000 +/+

VESA, 1280 X 1024 79.976 75.025 135.000 +/+

VESA, 1440 X 900 55.935 59.887 106.500 -/+

VESA, 1440 X 900 70.635 74.984 136.750 -/+

Horizontal Frequency

The time to scan one line connecting the right edge to the left edge of the

screen horizontally is called the Horizontal Cycle and the inverse number of

the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz

Vertical Frequency

Like a fluorescent lamp, the screen has to repeat the same image many times

per second to display an image to the user. The frequency of this repetition is

called the Vertical Frequency or Refresh Rate. Unit: Hz

Note

Design and specifications are subject to change without prior notice.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas

including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)

Storage

Temperature : -4°F ~ 113°F (-20°C ~ 45°C)

Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the

computer systems will provide the best ttings. In most ca operating conditions and monitor se ses, the monitor

installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)

above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright

sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.

Termékspecifikációk

Márka:	Samsung
Kategória:	Monitor
Modell:	933BWPLUS

Szüksége van segítségre?

Ha segítségre van szüksége Samsung 933BWPLUS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Monitor Samsung

Samsung LH65QETEPGC Útmutató

5 Április 2025

Samsung F24T650FYR Útmutató

21 Március 2025

Samsung SyncMaster 460FPN-2 Útmutató

12 Január 2025

Samsung C49RG90SSL Útmutató

12 Január 2025

Samsung C43J890DKA Útmutató

11 Január 2025

Samsung SyncMaster S20B370B Útmutató

10 Január 2025

Samsung S27D300GAN Útmutató

21 December 2024

Samsung S32D800UAC Útmutató

21 December 2024

Samsung S27DG500EC Útmutató

21 December 2024

Samsung S27DG504EC Útmutató

21 December 2024

Útmutatók Monitor

Legújabb útmutatók Monitor

Gigabyte MO27U2 Útmutató

5 Április 2025

Philips 221V8LB Útmutató

4 Április 2025

PureTools PT-SCREEN-100 Útmutató

2 Április 2025

Extron TLS 1025M Útmutató

2 Április 2025

Viewsonic VG2752-2K Útmutató

30 Március 2025

Satco S13165 Útmutató

30 Március 2025

Satco S16434 Útmutató

30 Március 2025

Satco S23165 Útmutató

30 Március 2025

Satco S23168 Útmutató

30 Március 2025

Satco S16503 Útmutató

30 Március 2025