Használati útmutató QTX UV Cannon 160.028UK

QTX Megkönnyebbülés UV Cannon 160.028UK

Olvassa el alább 📖 a magyar nyelvű használati útmutatót QTX UV Cannon 160.028UK (3 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
1/1
400W BLACK LIGHT
160.028
USER MANUAL
INTRODUCTION
Congratulations on the purchase of your new our company lighting effect. We are confident you will enjoy
many trouble free hours with this unit . To assist with the care and use of the product we have prepared this
short guide.
OPERATION
Before connecting this unit to the mains power supply for the first time you must first install the lamp .
(See ‘Replacing Lamp’ for details).
This lighting effect has been designed to function on a mains power supply of either 240V~50Hz and has been
fitted with a suitable power plug for use with your local voltage. Check the label on the unit and the power plug
for the correct voltage.
When connected to the mains power supply the unit should illuminate. The 160.028 utilizes a mercury vapor
lamp ,it will take 5 to 10 minutes to reach full intensity . The intensity of the lamp will increase with use. The
light emitted by the 160.028 is invisible and does not have the glow of a fluorescent fixture.
Due to the high operating temperature of halogen lamps it is advisable that the effect be used in well ventilated
areas taking care not to obstruct the air vents. To maximize lamp life, allow the unit to cool down before
moving or touching the lamp.
CAUTION
Due to the nature of the mercury vapor lamp, this lamp must be allowed to cool down (about 5 to10 minutes)
after being turned off before re-igniting. Failure to wait for cool down many cause the lamp to fail prematurely.
INSTALLATION/MOUNTION
Although this unit can be used in an upright position , it is recommended that , for safety purposes ,your
lighting effect be properly mounted using a suitable hanging clamp and safety cable . Our company offers a
range of items , which are ideal for safe mounting .
Use in a well-ventilated area without obstruction to air vents.
2/2
REPLACING LAMPS
1. Disconnect from main power supply before attempting to replace either lamp .
2. Ensure that the unit is sufficiently cool , before removing blown lamps.
3. Never touch new lamps with your fingers: use a tissue or a cloth.
In order to replace the lamp, disconnect from main power supply rst, and unscrew the lamp replacement cover.
Only use the appropriately rated lamps as use of any other lamp type many cause the unit to be non-operational.
Due to the nature of halogen lamp it is vitally important that you do not touch the new replacement lamp with
your fingers, as this will reduce lamp life considerably. Once again a tissue or cloth can be used for fitting the
replacement lamp.
If after replacement of the lamp, the unit is still not working then please contact your dealer or our company for
servicing.
CLEANING
The most important part of your lighting effect to keep clean is the reflector as it allows the light output to
transmit. This should be cleaned with a soft damp cloth. The body of the unit may also be cleaned in the same
way . We recommend internal cleaning be carried out by a fully qualified technician.
MAINTENANCE & SERVICING
Work on internal parts should be carried out by a qualified technician. Removal of covers other than the front to
replace lamp is considered a breach of warranty and will not be covered under any such agreement unless
authorized first by the company.
TROUBLESHOOTING
• If the unit is not functional-check main power supply is ‘on’.
• If the unit is functional but lamp does not light-lamp may require replacing.
• If after trying this solution you still have a problem contact your dealer or our company for service.
CAUTION
Do not obstruct the air vents.
Do not touch unit or lamps while hot.
Never put any objects through the air grill on the top of the unit.
No user serviceable parts inside, please refer to our company.
POWER CONNECTIONS
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other connections
be required they must be carried out with the following configuration.
Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable
3/3
In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection.
In the UK, it is required that all mains plugs are fitted with 5A fuses.
TECHNICAL SPECIFICATIONS
Power 240V~50Hz AC
Lamps E40 400W Mercury Vapor
Part No H400BL
Fuse 250V/5A
imensionsD 375x388x413mm
Weight 13.5kg

Termékspecifikációk

Márka: QTX
Kategória: Megkönnyebbülés
Modell: UV Cannon 160.028UK

Szüksége van segítségre?

Ha segítségre van szüksége QTX UV Cannon 160.028UK, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Megkönnyebbülés QTX

QTX

QTX DM-X12 Útmutató

15 Október 2024
QTX

QTX Moonglow Útmutató

7 Október 2024
QTX

QTX HPWash100 Útmutató

6 Október 2024
QTX

QTX Mesmerizer Útmutató

23 Szeptember 2024
QTX

QTX Recharge Performer Útmutató

23 Augusztus 2024
QTX

QTX Wash & Beam Útmutató

23 Augusztus 2024
QTX

QTX TetraCube Útmutató

23 Augusztus 2024
QTX

QTX BATPAR-18W Útmutató

23 Augusztus 2024
QTX

QTX TinyMover Útmutató

23 Augusztus 2024
QTX

QTX Recharge DJ Útmutató

23 Augusztus 2024

Útmutatók Megkönnyebbülés

Legújabb útmutatók Megkönnyebbülés

American DJ

American DJ Hydro Wash X19 Útmutató

30 Március 2025
American DJ

American DJ Saber Spot RGBW Útmutató

30 Március 2025
American DJ

American DJ Pixie Strip 120 Útmutató

30 Március 2025
Yongnuo

Yongnuo YNRAY260 Útmutató

30 Március 2025
Rollei

Rollei LUX Compact RGB Útmutató

30 Március 2025
Rollei

Rollei LUMIS Key Light Pro Útmutató

30 Március 2025
Rollei

Rollei LUMIS Mini RGB Útmutató

30 Március 2025
Rollei

Rollei LUX 100 Bi-Color Útmutató

30 Március 2025
Bresser

Bresser BR-150RGB Útmutató

28 Március 2025
Godox

Godox Litemons LP1200R Útmutató

28 Március 2025