Használati útmutató QSC AD-S.SUB

QSC hangszóró AD-S.SUB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót QSC AD-S.SUB (15 oldal) a hangszóró kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/15
Acoustic Design Series
Quick Start Guide
AD-S.SUB
AD-S.SAT
1
TD-001547-01-A
*TD-001547-01*
EXPLANATION OF SYMBOLS
The term “WARNING” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death.
The term indicates instructions regarding possible damage to physical equipment. Failure to follow them may result in equipment damage “CAUTION”
to equipment that may not be covered under the warranty.
The term “IMPORTANT indicates instructions or information that are vital to the successful completion of theprocedure.
The term “NOTE” indicates additional useful information.
The lightning flash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage within the product’s
enclosure that may constitute a risk of electric shock to humans.
The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in this manual.
1. Read these instructions and keep a copy for future reference.
2. Strictly follow and heed all instructions and warnings.
3. Consult a licensed and qualified professional engineer to devise and/or review an appropriate mounting scheme.
4. Do not use or submerge this loudspeaker product in or near water or liquids.
5. Clean only with a dry cloth. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near, or into the loudspeaker product.
6. Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions.
7. Do not install the loudspeaker near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers).
8. Do not use any attachments, accessories, mounts, or brackets that are not specified or approved by QSC, LLC.
9. Refer all service to qualified personnel. Service is required if the hanging mechanism or loudspeaker have been damaged in any way, such as liquid
having been spilled or objects have fallen into the loudspeaker or the loudspeaker has been exposed to rain or moisture, does not operate normally,
or has been dropped.
10. Observe all applicable local codes.
11. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
Maintenance and Repair
Advanced technology—e.g., the use of modern materials and powerful electronics—requires specially adapted maintenance and repair methods. To
avoid subsequent damage to the equipment, personal injury, and/or creation of additional safety hazards, have all maintenance or repair work on the
equipment performed only by a QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm,
or related damages that arise from any failure of the customer, owner, or user of the equipment to facilitate those repairs.
Warranty
For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com
IMPORTANT SAFETY INSTRUCTIONS
TD-001547-01-A 2
Install the AD-S.SUB Subwoofer
What's in the AD-S.SUB Box
AD-S.SUB
Rear
panel
cover
Euro-
style plug
(4-pole)
Wall mount
bracket
Fasteners
Adhesive
rubber feet
1x
Warranty
TD-000453
1x
Quick Start
Guide
TD-001547
TOP
Yes
No
–Figure 1
Mount the Subwoofer
Horizontal surface
Before you place the subwoofer on a shelf, floor, or other horizontal
surface, attach the four adhesive rubber feet onto the bottom side of the
subwoofer enclosure at the corners. If you place the subwoofer on a shelf
or other raised surface, make sure it cannot "walk" off the edge because
of vibration.
Vertical surface (e.g., a wall)
Note that the wall mount bracket can be attached to the subwoofer
enclosure in several ways, allowing you to orient the ports and the
connections as desired. The bracket has two parts; Figure 1 depicts the
one that attaches to the subwoofer enclosure.
1. Remove the plugs from four of the mounting holes in the enclosure
and attach the bracket securely using four of the fasteners provided.
Whichever way you choose to orient the subwoofer, make sure the top
of the bracket is near the top of it
2. Use the template (Figure 2) on the next page to locate and mark the
six attachment points for the other part of the bracket. Use anchoring
fasteners that are appropriate for the surface. Make sure that the
surface and the fasteners can support the weight of the subwoofer
(AD-S.SUB: 10.7 kg; 23.5 lb) plus a 5× or higher safety factor (some
jurisdictions may require higher safety factors).
3. Attach the bracket to the wall or vertical surface.
4. Lower the subwoofer enclosure onto the wall bracket. Use the
remaining fastener, inserted into the top of the brackets, to secure the
bracket parts together.
TD-001547-01-A 3
63.5 mm
2.50 in
63.5 mm
2.50 in
TOP
dia.
7.14 mm
0.28 in
6 places
Use six
6 mm
or 1/4 in
screws
–Figure 2–

Termékspecifikációk

Márka: QSC
Kategória: hangszóró
Modell: AD-S.SUB

Szüksége van segítségre?

Ha segítségre van szüksége QSC AD-S.SUB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hangszóró QSC

QSC

QSC K12 Útmutató

13 Október 2024
QSC

QSC KLA12 Útmutató

9 Szeptember 2024
QSC

QSC K8.2 Útmutató

9 Szeptember 2024
QSC

QSC AD-P.SAT Útmutató

8 Szeptember 2024
QSC

QSC AC-C2T Útmutató

3 Szeptember 2024
QSC

QSC AD-C4T-LP Útmutató

1 Szeptember 2024
QSC

QSC AD-S.SUB Útmutató

1 Szeptember 2024
QSC

QSC SR-8200 Útmutató

31 Augusztus 2024
QSC

QSC AD-P6T Útmutató

11 Augusztus 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró