Használati útmutató Pyle PUSBMIC50

Pyle mikrofon PUSBMIC50

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PUSBMIC50 (1 oldal) a mikrofon kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/1
PUSBMIC50
UHF WIRELESS USB MICROPHONE
USER’S MANUAL
PLEASE READ CAREFULLY BEFORE OPERATION
Computer
Plug USB connector of wireless USB
receiver into USB port on a computer. Turn
on handheld microphone and use audio
software in your computer to record.
USB
INTRODUCTION
With a wireless receiver built into a USB
stick and a high-quality handheld dynamic
microphone transmitter, this UHF wireless
USB microphone brings the convenience of
wireless to your karaoke and recordings. It's
the ideal wireless system for karaoke,
podcasting, YouTube performances, voice
over projects and much more.
The handheld microphone transmitter
features a high-quality dynamic mic capsule
designed to provide exceptional sound
reproduction for spoken word
presentations, as well as singing
applications and more. It offers over 60' of
wireless range (environment dependent),
operating in UHF 600~960 high frequency
band. The wireless receiver is USB powered
and features plug-and-play operation with
no driver installation required. Simply
connect the receiver directly to your
computer via USB and start singing and
recording.
FEATURES
•
system
• Wireless receiver built into a USB stick
• Handheld dynamic microphone
transmitter
• Transmitter operates on two AA batteries
(included)
• 60' operating range (environment
dependent)
• Plug-and-play operation with no driver
installation required
• Ideal for computer karaoke, podcasting,
voice over projects and much more.
• Record wirelessly to your favorite DAW or
voice recognition software on your
Mac/PC
UHF 600~960MHz high band wireless
USING HANDHELD MICROPHONE
1 2
3
1. USB connector: Plug into a computer or
Mp3 player USB port or 5V power adapter
to get power.
2. Line out: to connect to external speaker.
3. RF indicator: When handheld microphone
is powered on this LED will light red
displaying normal reception.
Parts Description
21 3 4
1. Grille(Capsule inside)
2. Power/low battery Indicator
3. Power ON/OFF/MUTE Switch
4. Battery Compartment/Cover
1. Open battery cover. Install the provided
2pcs 1.5V AA batteries and then close the
cover. Pay attention to the correct
polarity.
2. Push power switch to ON position, power
indicator should flash once briefly
indicating that the transmitter has
sufficient power. If the power LED
indicator stays on, it indicates that the
battery has insufficient power and should
be changed. If the power LED indicator
does not light at all and the transmitter
does not work, it indicates the battery is
dead and you should change the battery.
3. Now receiver RF indicator should
light(Please confirm frequency of
microphone same as that of receiver
before operation).
4. Push power switch to MUTE position to
mute the sound.
5. If the microphone is not going to be used
for any length of time, push power switch
to OFF position and remove the battery.
CONNECTION 1(Computer Karaoke)
Computer
Speaker
Plug USB connector of wireless USB
receiver into USB port on a computer.
Connect external speaker to phone out of
USB receiver. Play music from computer and
turn on handheld microphone to start sing a
karaoke song!
1. With this connection please set playing
device(audio output device) of your
computer to “USB Audio Device”.
2. receiver will receive
vocal signal from handheld MIC and pass
vocal signal directly to LINE OUT to be
mixed with music signal from computer
via USB connector. Recording is not
allowed in this mode.
With this connection
Note:
1. In Recording Mode please
device(audio input device) of your computer
to “USB Audio Device”.
2.In Recording Mode please do not connect
headphone or external speaker to phone
out of USB receiver. If you want to play
recorded file connect headphone or
external speaker to your computer phone
out.
set recording
Note:
SPECIFICATIONS
Frequency Range: 600~960MHz
Frequency Response: 100Hz~12KHz
Dynamic Range: >80dB
Operating Range: 60'(
)
Receiver Power Supply: 5V;
Transmitter Power Supply: 3V(2x1.5V AA
batteries)
Transmitting Power: <10mW
Receiver Output: >300mV
Output Impeadance: 1KΩ
environment
dependent
Operation
Speaker or Headphone
PHONE
MIC IN/LINE IN
EQ
CONNECTION 2(Computer Recording)
ACTIVE SPEAKER
USB PORT OF MP3 PLAYER
CONNECTION 3(Working as a Wireless
Microphone system)
Plug USB connector of wireless USB
receiver into USB port of Mp3 player in your
active speaker system. Using supplied
3.5/3.5 audio cable connect line out of
wireless USB receiver to MIC IN or LINE IN
of your active speaker.
This wireless USB receiver can also be
powered by external 5V power adapter(not
supplied) to be used as a wireless
microphone system.
USING WIRELESS RECEIVER

Termékspecifikációk

Márka: Pyle
Kategória: mikrofon
Modell: PUSBMIC50

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PUSBMIC50, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mikrofon Pyle

Pyle

Pyle PMKSHUSB04 Útmutató

15 Január 2025
Pyle

Pyle Pro PDWM2560 Útmutató

31 December 2025
Pyle

Pyle PDMICKT34 Útmutató

6 December 2024
Pyle

Pyle PDWM812WH Útmutató

6 December 2024
Pyle

Pyle PDWM3100 Útmutató

6 December 2024
Pyle

Pyle PDWM224BK Útmutató

6 December 2024
Pyle

Pyle PDWM221WT Útmutató

6 December 2024
Pyle

Pyle PDWM8225 Útmutató

14 Október 2024
Pyle

Pyle PDWM2135 Útmutató

7 Október 2024
Pyle

Pyle Pro PDWM2450 Útmutató

6 Október 2024

Útmutatók mikrofon

Legújabb útmutatók mikrofon

Røde

Røde NT1 Signature Series Útmutató

10 Április 2025
Genesis

Genesis Radium 400 G2 Útmutató

9 Április 2025
Ambient

Ambient TinyMike ATM216 Útmutató

9 Április 2025
Ambient

Ambient Sound Fish ASF-1 MKII Útmutató

9 Április 2025
Ambient

Ambient ASF-G Útmutató

9 Április 2025
Ambient

Ambient Soundfish 2 MkII Útmutató

9 Április 2025
Ambient

Ambient UMP III Útmutató

9 Április 2025
Comica

Comica VP3 Útmutató

2 Április 2025
Atlas Sound

Atlas Sound MWHHM Útmutató

2 Április 2025
Synco

Synco G2A1 Útmutató

2 Április 2025