Használati útmutató Pyle PPHP1299AI

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PPHP1299AI (8 oldal) a Bölcső/dokkoló állomás kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
USER’S MANUAL
PPHP1291 PPHP1591
PPHP1294A PPHP1594A
PPHP1299AI PPHP1599AI
www.pyleaudio.com
1
Before using your new Speaker System Please review the
following instructions, for the safety and investment.
INSTRUCTIONS
Before connecting the speaker, make sure the system is off and the controls on the minimum
level. On the contrary the system could damage
1. - Plug the power cable to the AC outlet and to the system and to the speaker
2. - Plug the Microphone in the “MIC” input
3.- Connect (CD, DECK, MP3, DVD, etc) on “LINE IN” input
4.- Turn on the systems. A green LED will light up to indicate the speaker is on
5.- Set the volume on the low level on the MIC and the LINE IN input
6.- Increase the master volume (place on the right side of LINE OUT* connector)
7.- Set TREBLE and BASS controls to equalize the sound.
8.- A red LED will light up when the system detects overload power. You will must decrease
the volume.
CAUTIONS
Do not place the microphone against the speaker, it can cause feedback echo and it will
damage the system
EXTRA FUNCTIONS
6.3 and canon connectors marked as LINE OUT can handle an amplifier or even another
powered speaker cabinet ,in cascade. On the bottom of the speaker there is a hole to place
a stand.
2
FEATURES:
PPHP1291: 12” 1000 Watt 2 Way Plastic Molded Speaker Cabinet
12'' Woofer
1.4'' Titanium Compression Driver
1/4” and Speakon Jacks input
Frequency response: 50-20 KHz
Power :1000 Watts
Impedance: 8 ohm
Crossover Frequency: 3.5K Hz
35mm Speaker Stand Mount
Dimensions: W15.6” x D12” x H 23.3”
PPHP1294A: 12” 1000 Watt Powered 2 Way Plastic Molded Speaker Cabinet
12" Woofer
1.4" Titanium Compression Driver
Dual XLR and 1/4" Mic Inputs
XLR Stereo RCA Line Input
XLR and 1/4" Line Outputs
Master Volume, Bass Treble Controls
Frequency response: 50-20 KHz
Power Output: 1000 Watts
Crossover Frequency: 3.5K Hz
35mm Speaker Stand Mount
110/220 Voltage Selectable
Dimensions: W15.6” x D12” x H 23.3”
PPHP1299AI: 12” 1000 Watt Powered 2 Way Plastic Molded Speaker Cabinet w/Built in
MP3 & Ipod Dock
Power Switch and Digital amplifier.
12" Woofer
1.4" Titanium Compression Driver
MP3 control with LCD display
USB Terminal
IPOD DOCK
XLR and 1/4" Mic Inputs
XLR Stereo RCA Line Input
XLR and 1/4" Line Outputs
Volume, Bass Treble Controls
Frequency response: 50-20 KHz

Termékspecifikációk

Márka: Pyle
Kategória: Bölcső/dokkoló állomás
Modell: PPHP1299AI

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PPHP1299AI, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Bölcső/dokkoló állomás Pyle

Pyle

Pyle PHST92IBK Útmutató

16 Január 2025
Pyle

Pyle PWPBT05BL Útmutató

5 Október 2024
Pyle

Pyle PHST92IBGL Útmutató

20 Szeptember 2024
Pyle

Pyle PWPBT75BL Útmutató

13 Szeptember 2024
Pyle

Pyle PSRB8 Útmutató

2 Szeptember 2024
Pyle

Pyle PWMA83UFM Útmutató

2 Szeptember 2024
Pyle

Pyle PMS8R Útmutató

8 Augusztus 2024
Pyle

Pyle PMBSPG40 Útmutató

3 Augusztus 2024
Pyle

Pyle PMS5DB Útmutató

3 Augusztus 2024
Pyle

Pyle PWPBT05GR Útmutató

3 Augusztus 2024

Útmutatók Bölcső/dokkoló állomás

Legújabb útmutatók Bölcső/dokkoló állomás