Használati útmutató Pyle PLUTV61BK

Pyle hangszóró PLUTV61BK

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PLUTV61BK (10 oldal) a hangszóró kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/10
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.PyleUSA.com
2
www.PyleUSA.com
3
PLUTV61BK Speaker Installation
Speaker Mounting suggestion as below:
Step 1: Removing the top half of clamp
Put the PLUTV61BK speaker in a safe place.
Using the 1/4” Hex key, remove the top clamp bolts.
Step2/3: To adjust mounting clamp angle and speaker position
Diagram A is to show there are four round pins underneath the bottom
base of aluminum die cast clamp, which can be inserted and xed to four
round notch holes on top of plastic cabinet as diagram B shows by every
45 degrees adjustment either at clockwise or counter clockwise direction.
Through such design, user can change the angle of swivel clamp, use the
5/16” hex key to loose the center screw a little bit and lift the bottom clamp
to twist speaker angle by every 45 degrees to get the optimal angle you
want. Then re-making sure the pins on base of bottom clamp are inserted
and sits on notch holes on top of plastic cabinet at and seamlessly.
Then re-tighten the center hex screw to secure the bottom clamp strongly.
Step 4: Securing clamp bolts
Using the correct rubber pads (labeled for O.D.) install on both top and
bottom half of clamps. 3.15” x 1.2” x 0.2” rubber pads for 1.75” O.D. 3.15” x
1.2” x 0.08” rubber pads for 2” - 3” O.D. Using the 1/4” Hex bit socket hand
tighten the bolts evenly (both sides should have the same spacing
between bolts).
Step 5: Option for adjustable PYLE logo---Unbolt the screws rst, adjust the logo
direction, then re-x screws.
Features:
Pro Audio PowerSport Speakers
Compact & High-Powered Output
Marine Grade Rated Construction
Weatherproof & Water-Resistant Housing
Sound System: (2) x 6.5'' Woofers + (2) x 1’ Tweeters
2-Way Full Range Stereo Sound Reproduction
Impressive Bass Response
Integrated Speaker Wiring for Quick Connection
Sleek Design, Machine Molded Speaker Cabinet Housing
Rugged, Universal Mount Bracket Design for Roll-Bar / Roll-Cage
Used for O-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft
What’s in the Box:
(2) 6.5'' -inch ATV/UTV Speakers
(2) Speaker Connection Wires, 6.5' ft.
(2) 3” Aluminum Mounting Brackets (Pre-Installed on Speakers)
(4) 3.15” x 1.2” x 0.2” Inches Rubber Pads
(4) 3.15” x 1.2” x 0.08”Inches Rubber Pads
(4) M8 x 55mm Hexagon Socket Head Cap Screws
(4) M8 x 35mm Hexagon Socket Head Cap Screws (Pre-Installed)
Marine/PowerSports Tower Technical Specs:
Power Output: 1200 Watts
Marine Grade Waterproof Rating: IP-X6
Speaker Size: 6.5’ -inch (Each)
Speaker Style: Passive Speakers
Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
Tweeter Type: Neodymium Dome (x2)
Impedance: 4 Ohm
Magnet Type: 32 oz. Circuit
Mid-Woofer Voice Coil Type: 1'', TIL
Sensitivity: 92 dB +/- 2 dB @ 1M/1W
Universal Mounting Brackets Roll-Bar/Roll-Cage Diameter: 1.75’ ~ 3.0’ –inches
1.75”~2” for Motorsports/ Powersports Application.
2.25”~3” for Marine Application.
Speaker Dimensions: 8.1’ x 8.9’ x 10.5’ -inches, with Bracket (-Each)
5/16”
Hex key
1/4”
Hex key
45°
Diagram A
Diagram B

Termékspecifikációk

Márka: Pyle
Kategória: hangszóró
Modell: PLUTV61BK

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PLUTV61BK, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hangszóró Pyle

Pyle

Pyle PLRGSW64BK Útmutató

16 Január 2025
Pyle

Pyle PDWR59BTB Útmutató

15 Január 2025
Pyle

Pyle PDIC61RD Útmutató

31 December 2025
Pyle

Pyle PDIC1681RD Útmutató

6 December 2024
Pyle

Pyle PDIW67 Útmutató

6 December 2024
Pyle

Pyle PDIC60 Útmutató

6 December 2024
Pyle

Pyle PLATV65BT Útmutató

6 December 2024
Pyle

Pyle PDIC81RD Útmutató

6 December 2024
Pyle

Pyle PDWR40W Útmutató

6 December 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró