Használati útmutató Pyle PLCMTR7250

Pyle tolatókamera PLCMTR7250

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PLCMTR7250 (5 oldal) a tolatókamera kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/5
USER
MANUAL
PLCMTR7250
PLCMTR7250
Waterproof Rearview Backup Camera & Video Monitor
System Kit, Angle Adjustable Night Vision Cam, 7" Display,
Front and Rear Vehicle Mounting
Please read instructions carefully before installation and use. Installation
should be performed by a professional installer. To ensure your safety, the
driver should not watch videos or operate features on the monitor while
driving. There are no serviceable parts in this unit, do not disassemble or
try to repair this unit. If the unit malfunctions please return to your vendor
or send to a Pyle repair facility. Please observe and obey the local laws and
regulations when installing the unit.
Upon Installation, please make sure as to not to interfere with any of the
vehicle's safety features, wiring, components, etc. We are not responsible
for any damages, injury, malfunctions or otherwise noted due to faulty or
non-professional installation.
Connection
Connect the camera's threaded locking 4-pin cable connectors into the female
receiving connection of the included 4-pin extension cables. The extension
cables then connect to your compatible video monitors with 4-pin receiving
connectors. The threaded locking cable connectors of the camera serve to
provide power and video for all cameras.
Please remember to disconnect your vehicle's battery prior to any connection /
installation. Use the included wiring harness to provide power and video signals
to your monitor. There are colored wires to assist in the video camera system setup.
See the wiring diagram for connections between cameras, monitor and your vehicle.
Wiring & Connection
The Reverse trigger cable is for the Ch1 and , connect the front view camera Ch2
to the Ch2,connect the reverse backup camera to the Ch1, when the truck in reverse
status, the reverse camera would be priority.
(V1 front view image)

Termékspecifikációk

Márka: Pyle
Kategória: tolatókamera
Modell: PLCMTR7250

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PLCMTR7250, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók tolatókamera Pyle

Pyle

Pyle PLCM4340 Útmutató

6 December 2024
Pyle

Pyle PLCMTRDVR41 Útmutató

26 Augusztus 2024
Pyle

Pyle PLDVRCAM74 Útmutató

20 Augusztus 2024
Pyle

Pyle PLCMTR71 Útmutató

8 Augusztus 2024
Pyle

Pyle PLCMDVR47 Útmutató

5 Augusztus 2024
Pyle

Pyle PLCM19 Útmutató

5 Augusztus 2024
Pyle

Pyle PLCM7800 Útmutató

4 Augusztus 2024
Pyle

Pyle PLCMH6 Útmutató

4 Augusztus 2024
Pyle

Pyle PLCM2720.5 Útmutató

3 Augusztus 2024
Pyle

Pyle PLCMTR74 Útmutató

31 Július 2024

Útmutatók tolatókamera

Legújabb útmutatók tolatókamera