Használati útmutató Pyle PHBT6

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PHBT6 (6 oldal) a fejhallgató kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/6
PHBT6
Sensitive Touch Control Panel Stereo
Bluetooth Headphone with Microphone
www.pyleaudio.com
Owner's Manual
PHBT6 with the latest technology is a stereo Bluetooth headphone with high
sensitive touch control panel. It supports the following profiles:
*HSP - Headset profile
*HFP - Hands-free profile
*A2DP - Advanced audio distribution profile
*AVRCP - Audio / video remote control profile
Overview
1) MFB (Multifunction button):
Switch on / off, pairing,
make /answer / end/ reject call.
2) Micro USB charging port
3) Built-in microphone
4) Touch panel: volume up / down,
last / next tracking, play / pause,
Charging the battery
When the headset is nearly exhausted, the Led flashes in red and beep” sound is
heard. You will need to charge it according to the following two steps.
Step 1: Plug the USB charging cable into USB port of PC.
Step 2: Connect charging cable with the micro USB charge port of the headset.
Note:
1) Before using this headset for the first time, please charge the battery fully.
2) It takes about 3 hours for a full charge of the headset.
3) The LED keeps in red when the headset is charging and will turn off when fully
charged.
Switch on / off the headset
1)To switch on the headset
Press and hold the MFB button (1) for 2 seconds and the LED (5) flashes in red.
Afterwards the LED flashes in red and blue alternatively, the headset enters into
pairing mode automatically.
2)To switch off the headset
Press and hold the MFB button (1) for 6 seconds until the LED flashes red and a
“beep” sound is heard.
Pairing the headset with your phone
1) Ensure the headset is turned off.
2) Place the headset and the mobile phone where they are easily viewable and no
more than one meter apart.
3) Press and hold the MFB for 3 seconds until the LED quick flashes blue and red
alternatively, and a "beep” is heard.
3) Activate your mobile phones’ Bluetooth function; please refer to your mobile
phone user guide for details.
4) Set the mobile phone to search for Bluetooth devices within range and select
“ PHBT6” from the list of devices shown.
5) Enter pass code "0000" and press "OK" to pair your headset
with mobile phone, when the pairing is completed, the LED will
flash blue regularly and the headset in standby mode.
6) Go back to your mobile phone’s main menu.
Note:
1) The pairing mode will last for 5 minutes. If the pairing failed, the headset will
automatically turn off.
2) After the initial connection, each time the headset is turned on it will seek the last
device it was connected to. If the device is turned on and in range, it will connect
automatically.
3) The battery meter will display automatically at the status bar of iPhone, iPad and
iPod once it is connected successfully. The headset will automatically power off if no
paired device is in range for 5 minutes.

Termékspecifikációk

Márka: Pyle
Kategória: fejhallgató
Modell: PHBT6

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PHBT6, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók fejhallgató Pyle

Pyle

Pyle PHPNC65 Útmutató

12 Augusztus 2024
Pyle

Pyle PSWP6 Útmutató

11 Augusztus 2024
Pyle

Pyle PSWBT550 Útmutató

7 Augusztus 2024
Pyle

Pyle PLVWH6 Útmutató

4 Augusztus 2024
Pyle

Pyle PHPW5 Útmutató

3 Augusztus 2024
Pyle

Pyle PSWBT550.9 Útmutató

3 Augusztus 2024
Pyle

Pyle PSWP28BK Útmutató

2 Augusztus 2024
Pyle

Pyle PSWPHP43 Útmutató

29 Július 2024
Pyle

Pyle PSWP14BK Útmutató

29 Július 2024

Útmutatók fejhallgató

Legújabb útmutatók fejhallgató