Használati útmutató Pyle PDWM5000

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PDWM5000 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
PDWM5000
4 Mic VHF Wireless Microphone System
www.PyleUSA.com
PREFACE
Please read this manual before using this equipment in order to avoid damage through incorrect operation and to get
the best performance from your purchase. We also recommend that you keep this manual handy for future reference.
VHF series professional wireless microphone systems introduces a number of advanced techniques and components,
including the ecient low consumption RF transmission, impact elimination, slow controlled output, superiors
sensitivity VHF narrow band HF and MF lters and 15ppm Crystal Frequency Lock etc. Online simulation EDA and strict
quality control are applied to ensure each system with excellent function.
FEATURES:
Introducing a special ALC circuit to ensure nondistortion;
Frequency compressing expanding technique to lower the noise and enlarge the dynamic range.
Superior squelch and high signal to noise ratio.
Almost zero noise output when standby.
Broad frequency response range, super low distortion.
Perfect operation status indications.
Multiple HF and MF narrow band lters to eliminate interfering signal.
Introducing low power consumption components to ensure longer battery life.
Special impact wave eliminating circuit for handheld microphone switches.
Long practical distance. Over 80m in ideal circumstances; practical 20 m radius in complex circumstances.
Multiple frequency design. Be able to use two microphones at the same time without mutual interference;
Applicable for medium & small stages, karaoke halls, and home entertainment etc.
1
www.PyleUSA.com
SYSTEM SETUP
1. Plug the provided audio cable into the receiver's output connector, and the other end into a mixer or power MIX
amplier system. Extend the two antennas fully to the vertical position. Switch the receiver, the light ON POWER ON
will glow indicating the machine standby. (Better keep distance between the receiver and oor to ensure good
receiving signals).
2. Open the battery cover of the microphone and install the batteries inside the compartment properly, then re-attach
the battery cover.
3. Position the transmitter power switch to , indicator light will glow ( position). ON MUTE
Now the receiver's corresponding channel light will also glow, indicating that the receiver has already received the
eective signals from the transmitter. Adjust volume knobs of the receiver and power amplier to ensure the suitable
volume for the system. Speak with microphone to check the sound.
4. When the transmitter power indicator dardens, it indicates low battery power.
Please change with new batteries in time. ( )Note: Do Not Mix Old and New Batteries
5. When using multiple system at the same time, it is necessary to use machines of dierent frequency.
System Turn On Process: Receiver Mixer or Pre Amplier Power Amplier (Opposite when Turned OFF)
2
www.PyleUSA.com
RECEIVER AND TRANSMITTER
FRONT PANEL OF RECEIVER REAR PANEL OF RECEIVER
RECEIVER FUNCTIONS
1. Power lndicator;
2. Power Switch;
3. CH. A Volume Control;
4. CH. A Receiving lndicator;
5. CH. B Receiving lndicator;
6. CH. B Volume Control;
7. CH. C Volume Control;
8. CH. C Receiving lndivator;
3
www.PyleUSA.com
RECEIVER AND TRANSMITTER
TRANSMITTER FUNCTIONS
1. Cartridge Grille
2. LED Power lndicator
3. Power Switch
4. Mic Body
5. Battery Compartment
SAFETY DIRECTION
1. Please read this manual carefully before operating the product.Read Carefully:
2. Keep this manual handy for future reference. Keep the Manual:
3. Please follow all the cautions indicated on the machine or in the manual.Mind the Cautions:
4. F Please follow all the operation process and operation instruction.ollow lnstructions:
5. Safety Environment: Don't put the machine in the place of high humidity, high electro magnetic eld, strong sun
light and high temperature.
6. Attention when Stop Using: If the system is not to be used for long periods of time, remove the batteries from the
mic and unplug the AC cord from the mains outlet.
7. Before cleaning, turn the system power. Don't clean it with liquid or sprayer. Clean only with dry cloth. Cleaning: OFF
8. Accessories: Only use the provided accessories or other certicated products.
9. Power Supply: The machine is only applicable to the indicated power supply. Please conrm whether it is suitable for
your district.
4
9. CH. D Receiving lndicator;
10. CH. D Volume Control;
11. CH.C/D Antenna Connector;
12. CH.A/B Antenna Connector;
13. AC Power Input;
ON
1 2 3 4 5
1
2
34 6 7 8 10
PW MA2 000 P ROF ES SIO NAL W IRE LES S MIC ROP HON E SY STE M
POW ER
CHA VO LUME CHB V OLUME CHC V OLUME CHD V OLUME
9MIX OUT
ANT.CD ANT.AB
OUT.D
OUT.C
OUT.B BALANACED DC13V/500mA
OUT.A
11 13 12

Termékspecifikációk

Márka: Pyle
Kategória: nincs kategorizálva
Modell: PDWM5000

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PDWM5000, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Pyle

Pyle

Pyle PDWM2950 Útmutató

13 Január 2025
Pyle

Pyle PVCLG85 Útmutató

10 Január 2025
Pyle

Pyle PDWR61BT Útmutató

10 Január 2025
Pyle

Pyle PKST44W Útmutató

6 December 2024
Pyle

Pyle PL2DN105 Útmutató

6 December 2024
Pyle

Pyle PVTC320U Útmutató

27 Szeptember 2024
Pyle

Pyle PLCAPE50 Útmutató

26 Szeptember 2024
Pyle

Pyle PLCAPE60 Útmutató

26 Szeptember 2024
Pyle

Pyle PLCAPE32 Útmutató

25 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025