Használati útmutató Pyle PAD20MXU

Pyle lemezjátszó PAD20MXU

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PAD20MXU (6 oldal) a lemezjátszó kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
PAD20MXU
5-Channel Professional Compact
Audio DJ Mixer with USB Interface
PAD20MXU
Please read these operating instructions carefully prior to operation
and keep them for future reference.
1. Operating Elements and Connections
1. (bal.) to connect a microphone to channel CH 1 via XLR Mono Input MIC IN
plug or 6.3mm plug. At the XLR jack, a phantom power of +18 V is always
present.
2. (RCAjacks) to connect an audio source with line signal Stereo Input LINE IN
level (e.g. CD player) to channel CH 2/3.
3. Stereo Input TAPE IN (RCA jacks) to connect the output of a recorder
4. Stereo Output TAPE OUT (RCA jacks) to connect the input of a recorder
5. (type B) to connect a computer or a power supply unit with USB USB port
connection; when operating the mixer with a computer, it is possible to use this
port as an audio output (mixed signal output) and as an audio input (feed-in of
audio data to be reproduced via channel Ch2/3)
1 2 3 4 5 6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
2 3
6. Power/Charge LED ON/CHARGE
• Not Lighting Up: During battery operation of the unit and when the unit is
switched and connected to a power supply and OFF the battery is fully charged.
• Shows Green: When the unit is switched and connected to a power OFF
supply and the battery is being charged.
• Shows Red and Green (= Yellow): When the unit is switched ON and connected
to a power supply and the battery is being charged
• Shows Red: When the unit Is switched and connected to a power supply ON
and the battery is fully charged.
7. (3.5mm jack) to connect the input of an amplier or Stereo Output MAlN OUT
another unit, e. g. a second mixer.
8. switchPOWER
9. Output MONITOR/ PHONES (3.5mm jack) to connect stereo headphones
(minimum impadance160)
10. Volume Control MONITOR/PHONES for the headphone output MONITOR/
PHONES (9)
11. Button TAPE IN ASSIGN TO MAlN to assign the input signal of the jacks TAPE
IN (3) to the outputs MAIN OUT (7), TAPE OUT (4) and USB (5)
12. Button TAPE IN ASSIGN TO MONITOR to assign the input signal of the jacks
TAPE IN (3) instead of the mixed signal to the headphone output MONITOR/
PHONES (9)
13. for the stereo output signal adjusted with the control Overload LEDs CLIP
MASTER (14)
14. MASTER ControI to set tha level of the output signal sent via the outputs
MAIN OUT (7), TAPE OUT (4) and the USB port (5)
15. Control GAIN for Channel CH 1 to set the input amplication.
16. High Frequency Control HI and Low frequency control LO for channel CH 1
17. Control LEVEL for channel CH 1
18. Panorama Control PAN for channel CH 1 to place the mono signal on the
stereo base.
19. Level Peak LED PK for Channel CH 1: if at all, should only briey light up
with level peaks
20. High Frequency Control HI and Low frequency control LO for channel CH 2/3
21. Control LEVEL for channel CH 2/3
22. Stereo Balance Control BAL for channel CH 2/3
23. Button USB ASSIGN TO CH 2/3 to assign the input signal of the USB port (5)
to channel CH 2/3.
www.PyleUSA.com www.PyleUSA.com
2. Applications
This compact 5-channeI audio mixer with USB interface is suited for universal
applications, e. g. For audio recording on the computer. The mono input channel
allows to connect a (phantom powered) microphone; the stereo input channel
allows to connect an audio source with line signal level. In addition, the mixer is
provided with connections for a recorder and headphones. The mixed signal is
sent to the output via a 3.5mm jack and the USB port. It is also possible to use
the USB port as an input to transfer audio data from the computer to the mixer.
When connecting the mixer to a computer, power is supplied via the USB
connection. When operating the mixer without a computer, either use a suitable
power supply unit with USB connection or operate the mixer via the integrated
rechargeable lithiumion battery. The battery is charged when the mixer is
connected to the power supply via the USB port.
3. Important Notes
This unit corresponds to all relevant directives of the EU and is therefore
marked with .
• The unit is suitable for indoor use only. Protect it against dripping and
splash of water, high air humidity and heat (admissibIe ambient temperature
range 32-104°F).
• For cleaning, only use dry soft cloth; never use water or chemicals.
• No guarantee claims for the unit and no liability for any resulting personal
damage or material damage will be accepted if the unit is used for other
purposes than originally intended. If it is not correctly connected or operated,
or if it is not repaired in an expert way.
If the unit is to be putout of operation denitively, take it to a locaI recycling
plant for a disposal which is not harmful to the environment.
4 5
4. Audio Connections
Prior to connection, always turn back the output controls MONITOR/PHONES
(10) and MASTER (14) to "0".
1. The input MIC IN (1) of the mono channel CH 1 allows to connect a microphone
via XLR plug or 6.3 mm plug. Both the XLR jack and the 6.3 mm jack of the
combined jack are balanced. The XLR jack always supplies a 18 V phantom
power and it thus suitable for a condenser Microphone operated with this
phantom power.
Caution! Do not connect microphone with unbalanced output via XLR plug.
It may be damaged by the phantom power.
2. The input LINE IN (2) of the stereo channel CH 2 allows to connect an audio
source with line signal level (e.g. CD player) via RCA plugs: L = left channel, R =
right channel.
3. It is possible to use the RCA jacks TAPE IN (3) and OUT (4) to connect a stereo
recorder:
• Connect the recording output of the recorder to the input TAPE IN.
• Connect the recording input of the recorder to the output TAPE OUT; the
output signal adjusted with the MASTER control (14) is sent to this output.
However, it is also possible to use the jacks for other units with line signallevel,
e.g. to connect a CD player or MP3 player to TAPE IN or to connect an amplier
to TAPE OUT.
4. The 3.5 mm jack MONITOR/PHONES (9) allows to connect stereo headphones
(impedance≥16Ω). Thus, you will be able to monitor the output signal adjusted
with the control MASTER (14) or the Input signal of the jacks TAPE IN (3) via
headphones.
5. At the stereo output MAIN OUT (7), the output signal adjusted with the MASTER
control (14) is present. This output allows to connect e.g. an amplier or a
second mixer via 3.5 mm plug.
6. When operating the mixer with a computer, it is possible to use the USB port (5)
for digital output of the mixed signal to the computer and for feeding digital
audio data to the mixer. To Connect the port see chapter 5.1.
www.PyleUSA.com www.PyleUSA.com
If the unit is to be put out of operation denitively, take it to a
local recycling plant for a disposal which is not harmful to the
environment.

Termékspecifikációk

Márka: Pyle
Kategória: lemezjátszó
Modell: PAD20MXU

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PAD20MXU, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók lemezjátszó Pyle

Pyle

Pyle Vintage PVTT2UBK Útmutató

4 Január 2025
Pyle

Pyle PMXU63BT Útmutató

9 Október 2024
Pyle

Pyle PAD33MXUBT Útmutató

30 Szeptember 2024
Pyle

Pyle PVTTBT9BR Útmutató

28 Augusztus 2024
Pyle

Pyle PVTT2UOR Útmutató

28 Augusztus 2024
Pyle

Pyle PMXU48BT Útmutató

7 Augusztus 2024
Pyle

Pyle PAD43MXUBT Útmutató

4 Augusztus 2024
Pyle

Pyle PVNTLCL41BT Útmutató

3 Augusztus 2024
Pyle

Pyle PMXU128BT Útmutató

31 Július 2024
Pyle

Pyle PAD12MXUBT Útmutató

29 Július 2024

Útmutatók lemezjátszó

Legújabb útmutatók lemezjátszó

Pro-Ject

Pro-Ject X8 B Útmutató

29 Március 2025
Rega

Rega RP40 Anniversary Edition Útmutató

14 Január 2025
Create

Create Record Player Retro Útmutató

14 Január 2025
Lenco

Lenco Classic Phono TT-34 Útmutató

12 Január 2025
Sunstech

Sunstech PXRC52CD Útmutató

11 Január 2025
Classic Phono

Classic Phono TCD-2551 Útmutató

11 Január 2025
Audio-Technica

Audio-Technica AT-LP70XBT Útmutató

11 Január 2025
Audio-Technica

Audio-Technica AT-LP70X Útmutató

11 Január 2025
Audio-Technica

Audio-Technica AT-LP8X Útmutató

6 Január 2025
Pro-Ject

Pro-Ject Signature 12.2 Útmutató

6 Január 2025