Használati útmutató Pulsar N945

Pulsar óra N945

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pulsar N945 (14 oldal) a óra kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/14
EFSGI – A17
GEBRAUCHSANWEISUNGEN
UND GARANTIE FÜR EUROPA /
OZEANIEN
ISTRUZIONI E GARANZIA
PER EUROPA / OCEANIA
INSTRUÇÕES E GARANTIA PARA
A EUROPA / OCEÂNIA
INSTRUCTIONS AND GUARANTEE
FOR EUROPE / OCEANIA
INSTRUCTIONS ET GARANTIE
POUR L’EUROPE / OCEANIE
INSTRUCCIONES Y GARANTIA
PARA EUROPA / OCEANIA
ANALOGUE TYPE
6-92 Printed in Japan
(E.F.S.G.I.P.)
Series GC & WF (Cal. N944, N945)
PULSAR ANALOGUE QUARTZ WATCH
WITH ALARM CHRONOGRAPH TIMER
Cal. N944, N945
FEATURES
MODES AND DISPLAYS
There are two buttons and a crown as indicated in the
illustration below.
[“TIME” mode]
This is a multi-display analogue watch featuring alarm, stopwatch,
countdown timer and dual time functions. The mode changes
simply by turning the crown.
TIME
Hour, minute and 24-hour hands
CALENDAR
Date is indicated by date indicator.
ALARM
The alarm is set on a 24-hour basis.
STOPWATCH (CHRONOGRAPH)
It can measure up to 12 hours in 1/10 seconds.
Split time measurement is also possible.
COUNTDOWN TIMER
Up to 60 minutes can be set with a preset function.
DUAL TIME
The time of a different time zone can be displayed on a 24-hour
basis.
Hour hand
24-hour hand
Date
Center hand
(date indicator)
Center hand
(stopwatch/timer
second hand)
Minute hand
Normal position
First click
Second click
Crown
Dual time hand
Mode indicator
Stopwatch
1/10 second hand
[Cal. N944]
The mode changes by turning the crown at normal position
clockwise or counterclockwise, and the mode indicator
shows the mode selected. The hands move and perform
different functions in each mode.
MODE INDICATOR
SETTIMETIME
ØTIMERCHRONO.
Countdown timer Hands position
adjustment
Alarm set timeTime
Date
Dual time
Alarm engaged/on
In each mode the hands perform the following functions.
N/F: Not functional. Disregard the display or movement.
*1: Alarm can be set to ring on a dual time basis.
*2: Special movement.
Time
Date
Dual time
Alarm disengaged/
off
Stopwatch
Functions of the crown and buttons in each mode
N/F : Not functional.
* : Please do not set the dual time in this mode.
ADJUSTING THE HAND POSITION
Before setting the time or calendar, or after the battery is replaced,
be sure to adjust the hand position using “Ø” mode.
Turn the crown to set the mode indicator to “Ø”.
If all the hands other than the dual time hand at the 3 o’clock
position do not return to the 12 o’clock position, follow the
procedure below.
Second click
Crown
Mode indicator
1. Pull out the crown to the first click.
2. Press “A” or “B” repeatedly but separately to reset the stopwatch
second (center hand) and stopwatch 1/10 second hands, which
are mechanically engaged. Both the hands move simultaneously
and return to the 12 o’clock position at the same time.
* Be sure to reset the pointed tip of the center hand to the 12
o’clock position.
* The hands move quickly if the button is kept pressed.
3. Pull out the crown to the second click.
Press “A” or “B” repeatedly but separately to reset the hour,
minute and 24-hour hands, which are mechanically engaged.
All of the three hands return to the 12 o’clock position at the
same time.
* Please note that it is not necessary to adjust the dual time
hand.
* The hands move quickly if the button is kept pressed.
4. Push the crown back in to the normal position.
TIME SETTING
• Turn the crown to set the mode indicator to either “TIME”
(alarm disengaged) or “TIME ” (alarm engaged).
The hour, minute and 24-hour hands move to indicate the time
set previously. Disregard the movement of the stopwatch 1/10
second hand, center hand and dual time hand during the time
setting.
Hour hand
Minute hand
24-hour hand
Second click
Crown
Mode indicator
Time shown is 10:08 PM or 22:08.
Turn the crown to set the mode indicator to either “TIME” or
“TIME ”.
The hands move to indicate the time and calendar set previously.
1. Pull out the crown to the first click.
2. Press “A” or “B” repeatedly but separately to set the calendar.
* Be sure to set the date indicator (forked tip of the center
hand) to the desired date printed on the dial.
* The hands move quickly if the button is kept pressed.
* Disregard the movement of the stopwatch 1/10 second hand
at the 12 o’clock position.
3. Push the crown back in to the normal position.
* While the crown is kept at the first click, the hands stop, and
when the crown is pushed back to the normal position, the
hands move and catch up with the current time.
DUAL TIME
Turn the crown to set the mode indicator to either “TIME” or
“TIME ”.
The hands move to indicate the time, calendar and dual time set
previously.
The dual time hand indicates the hour of the dual time while the
regular minute hand indicates the minutes of the dual time.
How to read the dual time
Minute hand
Dual time hand
The dual time shown is 11:08 AM.
First click
Mode indicator
Crown

Termékspecifikációk

Márka: Pulsar
Kategória: óra
Modell: N945

Szüksége van segítségre?

Ha segítségre van szüksége Pulsar N945, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók óra Pulsar

Pulsar

Pulsar P5A025X1 Útmutató

22 Augusztus 2024
Pulsar

Pulsar PC32 Útmutató

21 Augusztus 2024
Pulsar

Pulsar PC10 Útmutató

20 Augusztus 2024
Pulsar

Pulsar PH7514X1 Útmutató

20 Augusztus 2024
Pulsar

Pulsar PH8433X1 Útmutató

20 Augusztus 2024
Pulsar

Pulsar 1N8W Útmutató

19 Augusztus 2024
Pulsar

Pulsar DM02 Útmutató

19 Augusztus 2024
Pulsar

Pulsar VD67 Útmutató

18 Augusztus 2024
Pulsar

Pulsar NH38 Útmutató

18 Augusztus 2024
Pulsar

Pulsar VJ21 Útmutató

18 Augusztus 2024

Útmutatók óra

Legújabb útmutatók óra