Használati útmutató Proaim P-LLBT-150
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Proaim P-LLBT-150 (6 oldal) a Statief kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/6
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
HD 150mm Bowl Baby Camera Tripod Stand w
Lever Fricon and Aluminum Spreader (P LLBT- - -150)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box’
HD 150mm Bowl Baby Camera Tripod Stand
with Lever Fricon
Spanner Size: 13mm
Aluminium Spreader
A s s e m b ly Ma n u a l
2
Aluminum Spreader Setup
• Extend the Spreader on the oor and loosen
all three knobs.
NOTE: The Spreader aaches to the spiked legs
of the spreader to provide precise customizaon
of the tripod's length and stability.
• Aer loosening the knobs, extend the
Spreader per your requirement.
• You can lock the posion using the locking
knobs present on each arm.
NOTE: The arms of the Spreader can easily
telescope out from 41cm/16 to 66cm/26” ”
radius, oering a broader footprint to create a
secure and steady base for the tripod.
Extendable adjustment via the provided locking knobs of Spreader
3
• Loosen all three adjustment knobs to set the
desired height of the Stand.
NOTE: One stage telescopic design with fricon -
knob extends up to 6 inches to capture
low angle shots, and conversely, it can be easily -
extended up to 34 inches for greater elevaon.
• Aer seng the height, ghten the knobs to
secure the Stand, as shown in the image.
NOTE: Locking pins on each leg secures the
adjusted height, prevenng them from
retracng under load.
• Unlock the red knob to adjust the Tripod s legs ’
according to your requirement.
• Aer adjusng the Tripod legs, re-lock the
knob, as shown in the image.
• Mount the Tripod on the aluminum Spreader
by equally aligning them.
• Aer mounng the Tripod, properly secure it
using the rubber gripper.
150mm Bowl Baby Camera Tripod Stand Setup
Termékspecifikációk
Márka: | Proaim |
Kategória: | Statief |
Modell: | P-LLBT-150 |
Szüksége van segítségre?
Ha segítségre van szüksége Proaim P-LLBT-150, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Statief Proaim
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
1 Szeptember 2024
Útmutatók Statief
- Statief Sony
- Statief SilverCrest
- Statief Eurolite
- Statief Rollei
- Statief Hama
- Statief Kodak
- Statief DJI
- Statief Konig & Meyer
- Statief On Air
- Statief Flycam
- Statief Kogan
- Statief Hohem
- Statief Røde
- Statief Zhiyun
- Statief ARRI
- Statief Pyle
- Statief Magnus
- Statief Joby
- Statief Gravity
- Statief Neewer
- Statief Laserliner
- Statief REVO
- Statief Miller
- Statief Square Jellyfish
- Statief Fidlock
- Statief Glide Gear
- Statief Vortex
- Statief Robus
- Statief Manfrotto
- Statief Easypix
- Statief AVerMedia
- Statief Celestron
- Statief Vello
- Statief Benro
- Statief GVM
- Statief Sachtler
- Statief Sunpak
- Statief Celly
- Statief Drift
- Statief Velbon
- Statief Ultimate Support
- Statief Oben
- Statief Winegard
- Statief Libec
- Statief MOZA
- Statief Ulanzi
- Statief Sirui
- Statief Vinten
- Statief Acratech
- Statief ProMediaGear
- Statief Ravelli
- Statief Mantona
- Statief Vanguard
- Statief FeiYu-Tech
- Statief FeiyuTech
- Statief MOVE'N SEE
- Statief Kaiser Fototechnik
- Statief Slidekamera
- Statief IOptron
- Statief FLOWCINE
- Statief SteadiCam
- Statief Fat Gecko
- Statief 3 Legged Thing
- Statief FLM
- Statief Peak Design
- Statief Studio Assets
- Statief Stalco
- Statief Tiltall
- Statief E-Image
Legújabb útmutatók Statief
8 Október 2024
3 Október 2024
3 Október 2024
2 Október 2024
1 Október 2024
24 Szeptember 2024
22 Szeptember 2024
22 Szeptember 2024
20 Szeptember 2024
18 Szeptember 2024