Használati útmutató Posiflex PD-2601R

Posiflex nincs kategorizálva PD-2601R

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Posiflex PD-2601R (11 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/11

Part 1

FCC Notes:

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions manual, may cause interference to radio

communications. It has been tested and found to comply with

limits for a Class A digital device pursuant to subpart J of Part

15 of FCC Rules, which are designed to provide reasonable protection against

interference when operated in a commercial environment. Operation of this equipment

in a residential area is likely to cause interference in which case the user at his own

expense will be required to take whatever measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized

technicians opens the machine. The user should consult his/her dealer for the problem

happened. Warranty voids if the user does not follow the instructions in application of

this merchandise. The manufacturer is by no means responsible for any damage or

hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However,

Posiflex will assume no liability for any technical inaccuracies or editorial or other

errors or omissions contained herein, nor for direct, indirect, incidental, consequential

or otherwise damages, including without limitation loss of data or profits, resulting

from the furnishing, performance, or use of this material.

This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims

any warranties, expressed, implied or statutory, including without limitation implied

warranties of merchantability or fitness for particular purpose, good title and against

infringement.

The information in this manual contains only essential hardware concerns for general

user and is subject to change without notice. Posiflex reserves the right to alter product

designs, layouts or drivers without notification. The system integrator shall provide

applicative notices and arrangement for special options utilizing this product. The user

may find the most up to date information of the hardware from web sites:

http://www.posiflex.com or http://www.posiflex.com.tw

All data should be backed-up prior to the installation of any drive unit or storage

peripheral. Posiflex will not be responsible for any loss of data resulting from the use,

disuse or misuse of this or any other Posiflex product.

All rights are strictly reserved. No part of this documentation may be reproduced,

stored in a retrieval system, or transmitted in any form or by any means, electronic,

mechanical, photocopying, or otherwise, without prior express written consent from

Posiflex Inc. the publisher of this documentation.

All brand and product names and trademarks are the property of their respective holders.

PD – 2600 / 2601 / 2602 / 2603 Series

User’s Manual

Rev. D0

P/N:

1946090

115

Part 2

BRIEF INTRODUCTION

THE PRODUCT

The PD-2600 is a stand alone pole mount customer display designed for

discrete POS applications. The PD-2601 is a pole mount customer display

option designed for Posiflex HT series POS terminals and also the PB series

discrete systems. The PD-2602 is a pole mount customer display option

designed for Posiflex KS or TP series touch POS terminals. The PD-2603 is a

pole mount customer display option designed for Posiflex FT series touch POS

terminals. It is delivered in separate carton for HT / PB / KS / TP / FT series

and shall be installed per instruction in this manual.

FEATURES

• Bright VFD (vacuum fluorescent display) with green or blue filter

• Rear mount Pole Display for Posiflex HT series hybrid terminals or

PB series discrete systems or KS or FT series fan free touch POS

terminals or TP series touch POS terminals

• Two-line display with 20 characters per line

• Adequately large characters for easy viewing (9.03 mm by 5.25

mm)

• Long life and trouble free operation

• 15 , 30 and 45 adjustable viewing angles

• Total height 410 mm (Stand alone)

• Total height 392 mm (PD-2601 on base of HT and PB series)

• Total height 325 mm (PD-2602 on base of KS and TP series)

• Total height 375 mm (PD-2603 on base of FT series)

• ° Display frame can rotate horizontally 270 freely

• Various command emulation modes selectable by DIP switch

• Support 12 Code Pages of 128 characters each

• Support 12 international character sets of 12 characters each

• Simple installation

• Selectable between Serial (RS232) interface model and USB

interface model

• Supports UPOS 1.8 and is WEPOS ready

• Case color choices: ivory, black for HT terminals or black for FT,

KS and TP terminals

Part 3

INSTALLATION GUIDES

HOST SYSTEM PREPARAION

For serial interface (RS232) PD-2601or PD-2602 or PD-2603 to be used in HT

or PB or KS or TP or FT series, you have to adjust during power off the

internal jumper of the host system to to the COM port selected supply 5 V DC

for the serial interface pole display. This adjustment has to be done by a

qualified electronic technician following guide from relevant technical manual.

The default communication protocol should be set to 9600 bps, none parity, 8

data bits, 1 stop bit with hardware handshaking on CTS. The power for the

USB interface type pole display is supported through the USB connection.

However, should these customer displays are to be connected through an USB

HUB instead of a direct USB port of the system, the HUB must be powered by

a separate power adaptor otherwise there could be the power shortage problem.

INSTALLING PD-2600

In base of stand alone models (PD-2600 models only), looking from rear side

of the bottom, the connector area will look like below:

For serial (RS232) interface models:

The RJ45 type modular connector is for internal use and is already occupied.

The RS232 input port is a DB9 female connector. Connect the attached RS-

232 signal cable to this port and one of the COM port in the host system. Set

the RS-232 communication protocol for this port to 9600 bps, no parity, 8 bits,

1 stop bit with hardware handshaking. Connect the power adaptor to the

rightmost power connector. Turn on the switch in the front side of the base.

For USB interface models:

The RJ45 type modular connector is for internal use and is also already

occupied. Connect the “B” type connector of the interface cable to “USB” in

connector area and the “A” type end to USB port of the host. Insert the 2 pin or

To Display head

24 VDC

RS232 In 12 VAC In

12 VAC In +24 V DC In +24 V DC Out To Display head USB

Termékspecifikációk

Márka:	Posiflex
Kategória:	nincs kategorizálva
Modell:	PD-2601R

Szüksége van segítségre?

Ha segítségre van szüksége Posiflex PD-2601R, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók nincs kategorizálva Posiflex

Posiflex TX-2300-G2 Útmutató

6 Szeptember 2024

Posiflex TX-1000AE Útmutató

6 Szeptember 2024

Posiflex TX-5500 Útmutató

6 Szeptember 2024

Posiflex TX-5300 Útmutató

6 Szeptember 2024

Posiflex TX-6000 Útmutató

6 Szeptember 2024

Posiflex PD-6907U Útmutató

6 Szeptember 2024

Posiflex PD-6607U Útmutató

5 Szeptember 2024

Posiflex PD-6807U Útmutató

5 Szeptember 2024

Posiflex IO-200 Útmutató

5 Szeptember 2024

Posiflex PD-2604UE Útmutató

14 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Roland SD-20 Útmutató

16 Október 2024

SilverCrest SRG 1300 C3 Útmutató

16 Október 2024

IFM TY0058 Útmutató

16 Október 2024

Thule Kit 186039 Útmutató

16 Október 2024

Blumfeldt Solidflor Útmutató

16 Október 2024

Dimplex QRAD200E Útmutató

16 Október 2024

DAS Audio AX-112-5 Útmutató

16 Október 2024

Ferplast Ergocomfort Freetime Útmutató

16 Október 2024

AEG MECK52 Útmutató

16 Október 2024

Black Diamond BD1121530000ALL1 Útmutató

16 Október 2024