Használati útmutató Polk Reserve R200

Polk Speaker Reserve R200

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Polk Reserve R200 (71 oldal) a Speaker kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/71
R500, R600 & R700 Floor-standing Loudspeakers
R300, R350 & R400 Center Channel Speakers
R100 & R200 Bookshelf Speakers
Reserve™
R500, R600 & R700 Haut-parleurs sur pied
R300, R350 & R400 Enceintes centrales
R100 & R200 Enceintes d’étagère
OWNER’S MANUAL
2
English
WARNING: Listen Carefully
Polk Audio loudspeakers are capable of playing at extremely
high volume levels, which could cause serious or permanent
hearing damage. Polk Audio, Inc. accepts no liability for
hearing loss, bodily injury, or property damage resulting from
the misuse of its products. Keep these guidelines in mind and
always use good judgment when controlling volume:
• Limit prolonged exposure to volume levels that exceed
85 decibels (dB). For more information about safe volume
levels, take a look at the Occupational Health
and Safety Administration (OSHA) guidelines at
http://www.osha.gov/.
Product Disposal
Certain international, national and/or local laws and/or
regulations may apply regarding the disposal of this product.
For more information, please contact the retailer where you
purchased this product or the Polk importer/distributor in your
country. More information is also available at
www.polkaudio.com.
Expect Great Sound—The Polk Reserve Story
Thank you for purchasing the Polk Reserve Series loudspeakers!
Modern styling combined with Polk’s premium Pinnacle tweeter
and Turbine mid-range driver deliver high-resolution detail
and imaging. With our detailed, deep eortless bass, you will
enjoy a whole new listening experience. Pure and minimalist,
the Polk Reserve Series is engineered and designed with your
entertainment in mind.
Having built our reputation as “The Speaker Specialists” for
more than 45 years, we take pride in our superior sound
and build quality, which features many patented and award-
winning audio innovations. For the people of Polk, building
audio products is not just a job—it’s a passion. And if you’re
going to remember one thing, remember this: We live by the
truest principle of what audio should deliver—great sound at an
aordable price for everyone!
Technical Assistance or Service
Thank you for your Polk® purchase! If you have a question or
comment, please feel free to contact us. Please visit
www.polkaudio.com for support contact information.
Contents
Expect Great Sound — The Polk Reserve Story 2 .............................
Safety Instructions 3 ........................................................................................
What’s in the Box .............................................................................................4
How to Connect Your System ....................................................................4
Caring for Your Reserve Loudspeakers ................................................5
Reserve Series Speaker Positioning .......................................................6
Specifications 11 ....................................................................................................
4
English
Connectors
You have several options when choosing connectors for your
speaker wires, and it’s really a matter of personal preference.
Three of the more commonly used are banana plugs, spade
lugs and bare wire. If you know where you want to locate your
speakers and plan to set up your system and leave them there,
then bare wire will work fine. Just make sure there are not
stray strands of wire that could come into contact. If you like
to experiment with dierent speaker locations, spade lugs or
banana plugs oer more convenient options when it comes to
disconnecting and reconnecting wires.
Basic Floor-Standing, Center, Bookshelf, and Height Module
Speaker Hookup
Make sure that the red (+) and black (-) connectors on your
amplifier or receiver connect to the red (+) and black (-) connectors
on your speakers. If your speakers sound “thin,” with little bass and
little or no center image, odds are that one of the speaker wires is
connected backwards. Double check all connections.
Bi-Wiring (R700 only)
Bi-wiring can provide noticeable improvements in the overall
transparency of your loudspeakers. After removing the jumpers,
run separate speaker wires to the low and high frequency
drivers from a single amplifier (the upper set of binding posts
are for the high frequency drivers, the lower set of binding
posts are for the low frequency drivers). Connect one set of
speaker wires to the upper terminals on each speaker and one
set of wires to the lower terminals. Connect the other ends of
both wire sets to the same amplifier outputs. See amplifier/AV
receiver user manual for configuration instructions (Figure 1).
What’s in the Box
Each box contains:
1. Loudspeaker(s)
2. Owner’s Manual
3. Registration Card
4. Magnetic grilles
(Speaker cable not included)
How to Connect Your System
To get the best sound quality, it’s important to wire your
speakers correctly.
Wire Preparation
Follow the hookup directions included with your receiver/
amplifier. Strip 0.5” (12.7mm) of insulation from each of the
two conductors of the wire to expose the bare metal and twist
each of the individual conductors into single un-frayed strands.
Note that one of the terminals on the rear of each speaker is
marked red (+) and the other is black (–). Make sure that you
connect the wire from the positive (+) terminal of your amplifier
or receiver to the red (+) terminal on your speaker and the wire
from the negative (–) terminal of your amplifier or receiver to
the black (–) terminal on your speaker. Most wire has some
indicator (such as color-coding, ribbing or writing) on one of
the two conductors to help you maintain consistency.
These recommendations are for all connections from the
amplifier/receiver to each speaker:
Binding Posts
To connect wire to the binding post, unscrew the binding post
cap and insert the bare wire into the hole near the base of the
binding post. Do not insert the insulated part of the wire into
the hole as this will not give you a good connection. Tighten the
binding post cap until it seats firmly with the wire, but do not
over tighten.
Runs Minimum Wire Gauge
Lengths up to 25' (5 m) 16
Lengths greater than 25' (5 m)
but less than 50' (15 m)
14
Lengths greater than 50' (15 m)
but less than 75' (25 m)
12
Lengths greater than 75' (25 m) 10
(Figure 1)
RIGHT FRONT

Termékspecifikációk

Márka: Polk
Kategória: Speaker
Modell: Reserve R200

Szüksége van segítségre?

Ha segítségre van szüksége Polk Reserve R200, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Speaker Polk

Polk

Polk Signature Elite ES50 Útmutató

10 Október 2024
Polk

Polk S-15 Útmutató

8 Október 2024
Polk

Polk db6501 Útmutató

4 Október 2024
Polk

Polk TL1600 Útmutató

27 Szeptember 2024
Polk

Polk 255C-RT Útmutató

19 Szeptember 2024
Polk

Polk Ultramarine UMS66BR Útmutató

19 Szeptember 2024
Polk

Polk 265-LS Útmutató

17 Szeptember 2024
Polk

Polk SR2 Útmutató

15 Szeptember 2024
Polk

Polk N1 Útmutató

15 Szeptember 2024
Polk

Polk Signature Elite Útmutató

14 Szeptember 2024

Útmutatók Speaker

Legújabb útmutatók Speaker

Sonance

Sonance Visual Performance VP65 SST Útmutató

16 Október 2024
Bowers & Wilkins

Bowers & Wilkins CWM664 Útmutató

16 Október 2024
Teufel

Teufel Rockster Air Útmutató

15 Október 2024
Trust

Trust GXT 628 Útmutató

15 Október 2024
Alpine

Alpine PSS-22WRA Útmutató

15 Október 2024
Sharp

Sharp PS-932 Útmutató

15 Október 2024
Bauhn

Bauhn APPS-0724 Útmutató

15 Október 2024
Aiwa

Aiwa SP-A100 Útmutató

15 Október 2024
Harman Kardon

Harman Kardon Citation One Útmutató

14 Október 2024
Alpine

Alpine 30MC Útmutató

14 Október 2024