Használati útmutató Pioneer DVR-212D

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pioneer DVR-212D (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
S
ERIAL
-ATA
D
RIVE
I
NSTALLATION
I
N
A
N
I
NSTANT
Step 1 – Prepare the Computer
1) Turn OFF the computer and disconnect the power cord.
2) Remove the bezel and the open drive bay cover from the computer’s front panel.
Note: Your computer may be a
tower model as shown on the left
or a desktop model as shown
below. This drive works in either
PC chassis style.
Step 2 – Prepare the Drive
3) Attach slide rails to the drive if required for your drive model.
Slide rails are sold separately through computer retailers.
4) Position the drive close to the open computer bay and carefully insert the drive.
Horizontal Installation Vertical Installation
Step 3 – Connect the Cables
5) Connect the computer’s power cable to the
drive; checking the polarity of the cable.
6) Connect the computer’s Serial-ATA Interface
cable to the drive.
The computer powers the drive. Do NOT use a
power supply other than the PC’s internal source
Step 4 – Finish the Installation
7) Place the mounting screws in the appropriate holes and tighten by hand.
When mounting screws are loose, vibrations from the spinning disc may cause a ripping sound.
8) Replace the bezel and power the computer ON.
Serial-ATA Drives Use Direct-Only Communication.
There is NO Master/Slave Jumper.

Termékspecifikációk

Márka: Pioneer
Kategória: nincs kategorizálva
Modell: DVR-212D

Szüksége van segítségre?

Ha segítségre van szüksége Pioneer DVR-212D, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Pioneer

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva