Használati útmutató Pioneer CA-HR-FOR-EVO.001

Pioneer nincs kategorizálva CA-HR-FOR-EVO.001

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pioneer CA-HR-FOR-EVO.001 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
Installation manual SPH-EVO82DAB-FOR | Version 2.0
Screen brackets
Dashboard cover
Cable cover
Screen cover
Screw covers
Screen neck
Trim
EN - Installation Manual
Original dashboard
Interface
Remove radio surround trim
Remove original radio
1 2
4
3
CA-HR-FOR-EVO.001
INSTALLATION KIT FOR SPH-EVO82DAB-FOR
Compatibility:
Ford Transit Custom-V362MCA (2018 - ...
Ford Transit 2T-V363MCA (2019 - ...)
ATTENTION:
Compatible OEM radio: T15114A
Not compatible with OEM touch screen units
Outside temperature will no longer be visualised.
Remove 4 screws from the support bracket
Installation manual SPH-EVO82DAB-FOR | Version 2.0
Slide the screen support
onto the the radio unit
Screw screenbracket onto the screen
using the 2 middle screws
Take out the support bracket
Click the front trim with the chrome bezel
onto the screen
Install the side brackets to the radio unit,
both left and right
Secure the screen cover
with the remaining 4 screws
5
8 9
7
10
Mount screw covers, paying attention
to the marked numbers and locations
1 2
4
3
Secure it with the 4 hexagonal screws
11
6
Installation manual SPH-EVO82DAB-FOR | Version 2.0
Remove inside trim from fascia
Install the radio front cover
into the dashboard
14
16
1To steering wheel control to
SPH unit backside
2 To optional remote for
external power source
3 To backside EVO unit
4 To van’s main connector
5 To original USB plug in
dashboard
6 To USB-input on EVO unit
7 To original aerial connector
8 To EVO unit FM-input
9 Close loop on vehicle with
automatic gearbox
1
2
3
4
5
6
78
9
12
Make required connections
After all connections are made install the radio unit in the dash-
board with 6 screws & route the display cable to the front
13
Put the radio surround trim
back into the dasboard
15
Attach the display cable to the screen
and slide the bracket into the dashboard
Slide the display neck into the trim
17 18

Termékspecifikációk

Márka: Pioneer
Kategória: nincs kategorizálva
Modell: CA-HR-FOR-EVO.001

Szüksége van segítségre?

Ha segítségre van szüksége Pioneer CA-HR-FOR-EVO.001, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Pioneer

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025