Használati útmutató Peerless-AV SmartMount DS-C555-4X2

Peerless-AV nincs kategorizálva SmartMount DS-C555-4X2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Peerless-AV SmartMount DS-C555-4X2 (24 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/24
12014-06-20 #:009-9085-9 (2019-09-04)
ENG
DS-C555-4X2
46" - 55"
(117 - 140 cm)
800 lb
(363 kg)
MAX
22014-06-20 #:009-9085-9 (2019-09-04)
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
2
+1/2
4
3
Symbols
ENG
WARNING
ENG
Display center.ENG
x3
Screws must get at
least three full turns
and t snug.
ENG
Do not overtighten screws.ENG
ENG - Do not begin to install product until you have read and understood the instructions and warnings
contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position
equipment. This product must be installed onto at, hard, level surface to prevent tipping. Use with heavier
displays may result in instability causing tip over resulting in death or serious injury. The cart or stand is not
a󰀩xed or secured to the oor, and may therefore tip over and/or fall if screen and/or stand is shaken or hit.
Displays must be removed before moving cart. Not recommended for use in areas with heavy tra󰀩c. This product
is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never
exceed the Maximum Load Capacity. Be careful not to pinch ngers when operating the mount. Death or serious
injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed
on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over on
to the child. Relocating audio and/or video equipment to furniture not specically designed to support audio and/
or video equipment may result in death or serious injury due to the furnishing collapsing or over turning onto a
child. For support please call customer care at 1-800-865-2112.
WARNING
ENG
32014-06-20 #:009-9085-9 (2019-09-04)
Parts (Before beginning, make sure you have all parts shown below).
Parts List
Part #Description Qty
Acaster, 5" swivel 6 600-0026
Bcaster support 6 145-T1799
Ccover 9 145-T1809
Dbase leg 3 145-T1767
Ehorizontal leg support 2 145-T1785
Fbase support tube 3 145-T1812
Gbase support 14 560-T1261
Hvertical leg support 3 146-T1131
Ileft adaptor bracket 8 146-1609
Jright adaptor bracket 8 146-1608
Kside support bracket 2 145-T1807
Lvertical support bracket 4 145-T1806
Mcomputer cover 1 145-T1930
Ncomputer shelf 1 145-T1931
Odual cross support 4 146-T1905
Pcord bracket 6 146-T1321
Qknob 6 560-1160
Rbracket, 4x2 conguration 2 145-T1858
SM8 x 16mm socket button screw 200 520-9527
TM8 square nut 84 530-1066
Ucover clip 36 590-0317
VM5 x 10mm type-f, socket pin screw 18 520-1164
Wbar nut 28 146-1319
X1/4" power bit 1 560-0263
Y5mm allen wrench 1 560-9640
Znylon shoulder washer 32 590-2233
AA M6 x 12mm socket pin screw 32 520-1050
BB 4mm allen wrench 1 560-9646
A (6)
caster
B (6)
caster support C (9)
cover
D (3)
base leg
E (2)
horizontal leg
support
F (3)
base support
tube
H (3)
vertical leg
support
L (4)
vertical support
bracket
G (14)
base support J (8)
right adaptor
bracket
I (8)
left adaptor
bracket
K (2)
side support
bracket
ENG
42014-06-20 #:009-9085-9 (2019-09-04)
BB (1)
4mm allen
wrench
M (1)
computer cover
O (4)
dual cross
support
T (84)
M8 square nut
U (36)
cover clip
V (18)
M5 x 10mm
X (1)
1/4" power
bit
Y (1)
5mm allen
wrench
Z (32)
nylon shoulder
washer
AA (32)
M6 x 12mm
N (1)
computer shelf
S (200)
M8 x 16mm
R (2)
bracket, 4x2
conguration
P (6)
cord
bracket
Q (6)
knob
bar nut
W (28)
52014-06-20 #:009-9085-9 (2019-09-04)
1-1
1-2
S (4)
A
B
S (2)
T (2)
Do not fully tighten hardware
SIDE VIEW
x6
x6
Y
Y
ENG
62014-06-20 #:009-9085-9 (2019-09-04)
2
S (4)
S (4)
F
F
T (4)
T (4)
D
T (4)
x3
Y
72014-06-20 #:009-9085-9 (2019-09-04)
D
Casters must be ush to end of horizontal leg support.
ENG
4
SIDE VIEW
Do not fully tighten hardware
x14
W (2)
G
S (4)
3
TIGHTEN
CONNECTING
HARDWARE
Flush edges
ENG
x3
Y
Y
ENG
82014-06-20 #:009-9085-9 (2019-09-04)
5-2
H
TIGHTEN
CONNECTING
HARDWARE
5-1
H
TIGHTEN
CONNECTING
HARDWARE
x2
Y
Y
92014-06-20 #:009-9085-9 (2019-09-04)
6
E (2)
7
S (6)
T (4)
L
1/8"
(3mm)
1/8"
(3mm)
TIGHTEN
CONNECTING
HARDWARE
x4
LOCK WHEELS Y
Y
ENG
10 2014-06-20 #:009-9085-9 (2019-09-04)
x2
8
Use metric formula below and diagram
to the right to determine hole pattern required
for center vertical support bracket.
All dimensions are metric.
Use the outside mounting holes when…
a x 4 > 4368mm and a x 3 + b < 4318mm
Use the inside mounting holes when…
a x 4 > 4098mm and a x 3 + b < 4064mm
S (12)
T (8)
R
T (8)
R
S (12)
BACK
SIDE
1/8"
(3mm)
b
a
BACK OF DISPLAY
Y
ENG
ENG ENG
11 2014-06-20 #:009-9085-9 (2019-09-04)
DISPLAY HEIGHT
9
10
O (2)
TIGHTEN
CONNECTING
HARDWARE
L (4)
R (2)
Y

Termékspecifikációk

Márka: Peerless-AV
Kategória: nincs kategorizálva
Modell: SmartMount DS-C555-4X2

Szüksége van segítségre?

Ha segítségre van szüksége Peerless-AV SmartMount DS-C555-4X2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Peerless-AV

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva