Használati útmutató Peavey SP 118

Peavey hangszóró SP 118

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Peavey SP 118 (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
www.peavey.com
SP®118
Product
Specications
ENGLISH
SP®118 Sub
e SP® 118 features the Peavey exclusive 1808-8 AL CP Pro Rider®. Designed to support and enhance the bass output of the
full-range SP series sound reinforcement enclosures, it transforms a system into a thumping beast.
e SP® 118 enclosure is constructed of plywood augmented with internal braces, coated in a black textured polyurethane nish. A
full-length, wrap-around perforated steel grille protects the front of the enclosure. A pole mount plate is located on the top of the
enclosure, with an insert for a threaded pole, using M20 threads. Multiple y points are provided to allow overhead rigging.
Input connection to the system is made on the rear of the system, via an input cup with two 1/4” phone jacks and one four-pin twist
lock connector in parallel.
As the SP® 118 does not include a passive subwoofer crossover, input should be electronically ltered of typical subwoofer applications.
In addition for high power operation, a high pass lter set to 40 Hz or higher and of 24 dB/octave slope should be used to improve
performance and reliability.
FEATURES:
• 18” 1808-8 AL CP Pro Rider® woofer
• 1200 watts program, 2400 watts peak
• Inputs include one four-pin twist lock connector and two 1/4” phone jacks
• Pole mount plate built-in, threaded for positive pole support
* Threaded pole for mount included.
* Multiple Fly Points
Flying/Rigging Information
Caution: Before attempting to suspend this speaker, consult a certified structural engineer. Speaker can fall from improper
suspension, resulting in serious injury and property damage. Do not suspend or mount any other product or device from
this enclosure! Maximum enclosure angle 30 degrees. Use only the correct mating hardware. All associated rigging is the
responsibility of others.
Hardware for Flying/Rigging the SP®-118
Eyebolts or bracket bolts should be M8 metric thread.
Eyebolts and bracket bolts must conform to certain minimum strength criteria for safety reasons.
Unspecified eyebolts found at local hardware stores are not strong enough to maintain safety for overhead flying or rigging. Use only
forged steel shoulder machinery eyebolts designed for rigging use, which adhere to the stated standards as outlined below.
Hardware Specifications
Forged shoulder machinery eyebolts should be an M8 size, 1.25 mm per thread, and must conform to DIN 580 or ASTM A489, for
Germany, BGV-C1 is the relevant standard. Minimum shank length should be 26 mm. The eyebolts should be rated for a minimum
of 1,000 lbs straight pull working load
Bolts used on custom mounting brackets must be certified to be a metric grade 8.8 or better.
If there are any questions regarding the proper hardware or practices for safe flying or rigging of the Peavey SP® 118, contact a certified
structural engineer, or consult with those local rigging companies who have trained and certified personnel.
Architectural & Engineering Specifications
The loudspeaker system shall have an operating bandwidth of 51 Hz to 320 Hz. The nominal output level shall be 98 dB
when measured at a distance of 1 meter with an input of 1 watt. The nominal impedance shall be 8.0 ohms. The maximum continuous
power handling shall be 600 watts, with maximum program power of 1,200 watts, peak power input of at least 2,400 watts and a
minimum amplifier headroom of 3 dB. It shall use a Peavey 1808-8 AL CP Pro Rider® woofer. Fly point inserts shall be provided, 12
per cabinet, at the following locations: 3 top, 3 bottom and 2 each side & 1 each top rear and bottom rear. The outside dimensions
shall be 26.38 inches high by 22.84 inches wide by 24.5 inches deep. The weight shall be 77 lbs. The loudspeaker system shall be a
Peavey model SP® 118.
Frequency Response, 1 meter on-axis, swept-sine in anechoic environment:
51 Hz to 320 Hz (±3 dB)
Usable Low Frequency limit (-10 dB point):
41 Hz
Power Handling:
Low Frequency Section:
600 W continuous
1,200 W program
2,400 W peak
Sound Pressure Level, 1 Watt, 1 meter in anechoic environment:
Low Frequency Section:
98 dB SPL, (2.83 V input)
Maximum Sound Pressure Level (1 meter):
Low Frequency Section:
126 dB SPL continuous
132 dB SPL peak
Transducer Complement:
Low Frequency Section:
1 X 18” woofer, vented
1808-8 AL CP Pro Rider®
Box Tuning Frequency:
Low Frequency Section: 43 Hz

Termékspecifikációk

Márka: Peavey
Kategória: hangszóró
Modell: SP 118

Szüksége van segítségre?

Ha segítségre van szüksége Peavey SP 118, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Peavey

Peavey

Peavey PVXp 15 DSP Útmutató

31 December 2025
Peavey

Peavey RBN 215 Útmutató

19 Szeptember 2024
Peavey

Peavey PVs 18 Útmutató

16 Szeptember 2024
Peavey

Peavey SP 218P Útmutató

14 Szeptember 2024
Peavey

Peavey S-12825 RB Útmutató

29 Augusztus 2024
Peavey

Peavey SSE 10 Útmutató

20 Augusztus 2024
Peavey

Peavey RBN 118 Útmutató

14 Augusztus 2024
Peavey

Peavey PHR 860S Útmutató

12 Augusztus 2024
Peavey

Peavey ISM 5Tx Útmutató

9 Augusztus 2024
Peavey

Peavey PV 115D Útmutató

8 Augusztus 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025
Turbosound

Turbosound PQ12-SB Útmutató

3 Április 2025
Trust

Trust Tytan GXT 658 Útmutató

3 Április 2025
Turbosound

Turbosound PQ15-YB Útmutató

3 Április 2025
Klipsch

Klipsch Synergy KSB-S1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy KSF-10.5 Útmutató

3 Április 2025
Klipsch

Klipsch kO-R1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SB-1 Útmutató

3 Április 2025
Klipsch

Klipsch Reference RB-5 II Útmutató

3 Április 2025
Klipsch

Klipsch Contractor CS-800-R Útmutató

3 Április 2025