Használati útmutató PCE Instruments PCE-DPD-F2

PCE Instruments Mérőberendezések PCE-DPD-F2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót PCE Instruments PCE-DPD-F2 (32 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/32
PCE-DPD-F1
PCE-DPD-F2
Panel meter for load cells
Digital panel meter for load cells. Provides excitaon voltage to power up to 8 cells. Standard
96 x 48 mm size (1/8 DIN). Reading with 6 digit display. Accepts 4 and 6 wire load cells, includes ‘sense’
funcon, fast access to alarm setpoints, tare and ‘auto-tare’ funcons, ‘on power up’ funcons, stabil-
ity alarms, congurable operator menu, congurable led brightness. Universal AC and DC power. Up
to 3 oponal modules for output and control (relays, transistor, control SSR, analog outputs, Modbus
RTU communicaons, RS-485 ASCII, RS-232, ...)
www.pce-instruments.com
DIGITAL PANEL METERS
4784r03
User’s Manual
2
1. Panel meter PCE-DPD-F1 & F2
Panel meter for load cells, size 96 x 48 mm (1/8 DIN)     
Digital panel meter, with 96 x 48 mm (1/8 DIN) size and 6
digits with 14 mm digit height, for load cell signals. Pro-
vides excitaon voltage congurable to +5 Vdc or +10 Vdc
to power up to 8 standard 350 Ohms cells. Scalable read-
ing from 999999 to -199999 with congurable decimal
point.
Tare funcon, with congurable controls, and ‘auto-tare’
funcon for automac tare correcon when weight is re-
moved from the cell. Three working modes with dierent
acquision speeds and noise rejecon to 50 and 60 Hz.
Output and control opons with 1, 2 and 3 relays, isolated
analog outputs, Modbus RTU communicaons, transistor
outputs, SSR control outputs, RS-485 ASCII and RS-232.
Independent alarms congurable as maximum or mini-
mum, with acvaon at setpoint or when reading is
stable, with 1 or 2 setpoints per alarm, hysteresis, inde-
pendent acvaon and deacvaon delays, congurable
inverted acvaon of the relay and congurable locked
alarms (see secon 1.13.8).
Front protecon IP65. Connecons by plug-in screw ter-
minals. For industrial applicaons.
Funcons included :
•
tare accessible from frontal key or rear contact
(see sec-
on 1.11)
• automac ‘auto-tare’ funcon (see secon 1.13.4)
• access to gross weight value and tare value (see sec-
on 1.9.5)
• funcon ‘On Power Up’ for automac acvaon of
funcons at start-up (see secon 1.13.14)
• scale factor for easy modicaon of reading units (see
secon 1.13.5)
• ‘stock units’ funcon to count units (see secon 1.13.6)
• access to the measured signal value (in mV), excitaon
current provided (in mA) and real excitaon voltage (see
secon 1.13.13)
• congurable ‘Fast access’ menu (key ‘UP’ ( )) with 5
access to selected funcons (see secon 1.13.13)
Mulple display lters, memory for maximum and mini-
mum, password, 5 congurable brightness levels.
1. Power and signal connecons
- connect the power (see secon 1.8)
- connect the signal (see secon 1.8)
- read recommendaons to connect the ‘sense’ (see secon
1.8.1) and for load cell ground connecons (see secon
1.8.2)
2. Inial setup (see secon 1.13.2)
- theorecal conguraon of the cell (obtain the load cell
data : sensivity, load and excitaon) and congure the
instrument
- apply the empirical conguraon of the cell (apply the
high and low ‘eld correcon’)
- assign the ‘system zero’
3. Advanced conguraon (oponal) (see secon 1.13.7)
- tare conguraon, see secons 1.11 and 1.13.4
1.1 How to use this manual
- funcon ‘stock units’ (see secon 1.13.6)
- scale factor (see secon 1.13.5)
- acquision modes (see secon 1.9.1)
4. Congure the alarms (oponal) (see secon 1.13.8)
5. Display lters (oponal) (see secon 1.13.10)
6. Congure operator controls (oponal)
- congure the rear control (see secon 1.13.11)
- congure the front key ‘LE’ (3)(see secon 1.13.12)
- congure the fast access (key ‘UP’ ( ))
5(see secon 1.13.13)
7. Congure other funcons (oponal)
- congure the ‘on power up’ funcon (see secon 1.13.14)
- congure the password and brightness level (see secon 1.13.17)
8. Congure the output and control opons: analog or serial
(see secon 1.13.18)
If this is the rst me you are conguring this instrument,
below are the steps to follow to install and congure the in -
strument. Read all the manual secons in order to have a
full and clear view of the characteriscs of the instrument.
Do not forget to read the installaon precauons
at secon
1.19
.
3
PCE Instruments | www.pce-instruments.com
1. Panel meter PCE-DPD-F1 & F2 2. . . . . . . . . . .
1.1 How to use this manual . . . . . . . . . . . . 2
1.2 Index . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 How to order . . . . . . . . . . . . . . . . . . 3
1.4 Material included . . . . . . . . . . . . . . . . 4
1.5 Addional informaon . . . . . . . . . . . . . 4
1.6 Front view . . . . . . . . . . . . . . . . . . . . 4
1.7 Rear view . . . . . . . . . . . . . . . . . . . . 4
1.8 Signal and power connecons . . . . . . . . . 5
1.8.1 Connecng the ‘sense’ . . . . . . . . . . . 5
1.8.2 Connecng the cell to the ground . . . . . 5
1.9 Technical specicaons. . . . . . . . . . . . . 6
1.9.1 Acquision modes. . . . . . . . . . . . . . 6
1.9.2 Signal ranges . . . . . . . . . . . . . . . . . 7
1.9.3 Number and type of cells accepted . . . . 7
1.9.4 Mechanical dimensions (mm ) . . . . . (in) 7
1.9.5 Gross weight, net and tare . . . . . . . . . 7
1.10 Included funcons. . . . . . . . . . . . . . . 8
1.11 ‘Tare’ funcons included . . . . . . . . . . . 8
1.12 Examples of connecons for more than 1 cell 9
1.12.1 Connecons with a juncon box . . . . . 9
1.12.2 Connecons with 3 or 4 load cells . . . . 9
1.13 Conguraon . . . . . . . . . . . . . . . . .10
1.13.1 How to operate the menus . . . . . . . .10
1.13.2 Inial set-up . . . . . . . . . . . . . . . .11
1.13.3 Inial setup menu . . . . . . . . . . . . .12
1.13.4 Funcon ‘auto-tare’ . . . . . . . . . . . .13
1.13.5 Scale factor . . . . . . . . . . . . . . . . .13
1.13.6 Funcon ‘stock’. . . . . . . . . . . . . . .13
1.2 Index
1.13.7 Advanced conguraon menu . . . . . .14
1.13.8 Alarms. . . . . . . . . . . . . . . . . . . .15
1.13.9 Alarm conguraon . . . . . . . . . . . .16
1.13.10 Display lters . . . . . . . . . . . . . . .17
1.13.11 Rear controls . . . . . . . . . . . . . . .18
1.13.12 Front key ‘LE’ ( ). . . . . . . . . . . . .
318
1.13.13 Fast access. . . . . . . . . . . . . . . . .19
1.13.14 ‘On power up’ funcon. . . . . . . . . .19
1.13.15 ‘Fast access’ conguraon menu . . . .20
1.13.16 ‘On power up’ conguraon. . . . . . .20
1.13.17 Tools . . . . . . . . . . . . . . . . . . . .21
1.13.18 Access to opons conguraons menu 21
1.14 Full conguraon menu. . . . . . . . . . . .22
1.15 Factory conguraon . . . . . . . . . . . . .25
1.16 Messages and errors . . . . . . . . . . . . .25
1.17 To access the instrument . . . . . . . . . . .26
1.18 Modular architecture . . . . . . . . . . . . .26
1.19 Precauons on installaon . . . . . . . . . .27
1.20 Warranty . . . . . . . . . . . . . . . . . . . .27
1.21 CE declaraon of conformity . . . . . . . . .27
2. Output and control modules . . . . . . . . . . .28
2.1 Module PCE-DPD/R . . . . . . . . . . . . . . .28
2.2 Module PCE-DPD/T . . . . . . . . . . . . . . .28
2.3 Module PCE-DPD/SSR. . . . . . . . . . . . . .29
2.4 Module PCE-DPD/AV . . . . . . . . . . . . . .29
2.5 Module PCE-DPD/MB. . . . . . . . . . . . . .30
2.6 Module PCE-DPD/485 . . . . . . . . . . . . .30
2.7 Module PCE-DPD/232 . . . . . . . . . . . . .31
PCE-DPD F
Model Power
-1+Up to 3 slots for opons available
-1 (85-265 Vac/dc)
 
-2 (11/60 Vdc,
 
24 Vac, 48 Vac)
   
1.3 How to order
Opons
PCE-DPD/R (1 relay SPDT)
PCE-DPD/AV (analog output mA & Vdc)
PCE-DPD/MB (Modbus RTU)
PCE-DPD/485 (RS-485)
PCE-DPD/233 (RS-232)
PCE-DPD/T (1 transistor)
PCE-DPD/SSR (1 SSR control)

Termékspecifikációk

Márka: PCE Instruments
Kategória: Mérőberendezések
Modell: PCE-DPD-F2

Szüksége van segítségre?

Ha segítségre van szüksége PCE Instruments PCE-DPD-F2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Mérőberendezések PCE Instruments

PCE Instruments

PCE Instruments PCE-HT-225A Útmutató

29 Március 2025
PCE Instruments

PCE Instruments PCE-DD-A Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-128 Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-3000UL Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-BPD-C-66A Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-DFG N 5TW Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-MA 100 Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-MA 110 Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-DFG NF 5K Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-LES 103UV Útmutató

28 Március 2025

Útmutatók Mérőberendezések

Legújabb útmutatók Mérőberendezések

Uni-T

Uni-T UT220 Útmutató

3 Április 2025
Uni-T

Uni-T UT681C Útmutató

3 Április 2025
Uni-T

Uni-T UT216C Útmutató

3 Április 2025
Uni-T

Uni-T UT611 Útmutató

3 Április 2025
Uni-T

Uni-T UT210D Útmutató

3 Április 2025
Uni-T

Uni-T UT210C Útmutató

3 Április 2025
Uni-T

Uni-T UT210B Útmutató

3 Április 2025
Uni-T

Uni-T UT682 Útmutató

3 Április 2025
Uni-T

Uni-T UT275 Útmutató

3 Április 2025
Uni-T

Uni-T UT08A Útmutató

3 Április 2025