Használati útmutató PCE Instruments PCE-444

PCE Instruments Mérőberendezések PCE-444

Olvassa el alább 📖 a magyar nyelvű használati útmutatót PCE Instruments PCE-444 (2 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Manual
Environmental Tester
PCE-444
1 Safety .
Read the following safety information carefully before attempting to operate or service the meter.
Use the meter only as specied in this manual; otherwise, the protection provided by the meter
may be impaired.
▲ ： Environment conditions
1 90RH Non-condensation ． RH ≤ ％（ ）
2 Operating temperature:- /-4 ． 20℃～60℃ ℉～140℉
▲ Maintenance
1 Repairs or servicing not covered in this manual should only be performed by ．
qualied personnel.
2 Wipe the unit with a dry soft cloth periodically. Do not use abrasives or solvents ．
on this instrument.
▲ ： Safety symbol
Comply with EMC
2 Introduction .
The Humidity & Temperature Meter is designed with a high accuracy humidity &
temperature sensor, providing high accuracy, fast response and stable readings. It is widely used
for monitoring and collecting data of environment temperature and humidity. This meter is widely
used for measurement of temperature and humidity of room, metro, library, commercial center,
communication center room, etc.
3 Features.
➢ Imported high accuracy humidity &temperature sensor ,high accuracy, fast response
➢ Color LCD display with backlight
➢ Temperature unit selection / ：℃ ℉
➢ MAX/MIN
➢ HOLD
➢ Dew point temperature
➢ Wet bulb temperature
➢ Enable/Disable auto power o
➢ Over range indication
➢ Low battery indication
4. Basic Operation
1. Open battery cover and install 3*1.5V AAA batteries in the battery compartment.
2.Power on: press“ ”to power on，the meter conducts self-inspection, after LCD displays, it
measures temperature and humidity automatically.
3.After testing ，press“ ”to turn off the meter.
Note: Remove the battery when the meter is to be stored for long periods of time to avoid battery
leakage.
5 Specication .
Humidity
Range 0 100%RH ： ～
Range
Accuracy
Resolution
45～75RH%
±3.0 RH%
0.1
Others
±4.5 RH%
Temperature
Range
Accuracy
Resolution
- /-4 20℃～70℃ ℉～158℉
±1.0 /±1.8 ℃ ℉
0.1
Dew point temp.
20 70℃～℃ ℉ ℉ /-4 ～158
±1.5 /±2.7 ℃ ℉
0.1
Remark: Accuracy is based on environment condition of ; 25℃
40 RH% 100 RH% ～
Wet bulb temp.
20 70℃～℃/ -4 158 ℉～℉
±1.5 /±2.7 ℃ ℉
0.1
Data update
0.5S
Enable/disable
auto power o
The meter shuts oautomatically after 15 minutes inactivity under auto
power o mode, disable auto power o is available
Operating conditions
- /-4 ,10 RH% RH% 20℃～60℃ ℉～140℉ ～90
Storage conditions
- /-4 ,10 RH% RH% 20℃～60℃ ℉～140℉ ～75
Power supply
3*1.5V “AAA” batteries
Battery life
at least 50 hours
Dimensions
168*56*30.5 mm
Weight
75g
6 Meter description .
①. Temperature and humidity sensor
②. Color LCD display
③. Hold button
④. Power on/o button
⑤. MAX/MIN button
⑥. Mode selection button
⑦. Battery cover
⑧. Nameplate
7 LCD display description .
①. Data hold Icon
②. Auto power o Icon
③. Temperature reading
④. Dew point temperature units icon
⑤. Wet bulb temperature units icon
⑥. Humidity reading
⑦. Humidity unit icon
⑧. Temperature unit icon
⑨. low battery Icon
⑩. MAX/MIN
8 Operation instruction .
8.1 power on/o；
；
；
；；press“ ”to turn on/off the meter.
8.2 In the measuring mode Data hold; ， ，press“ ” “HOLD”Icon will appear on the
LCD which indicates the data is freezed. To release the held reading， ，press“ ”again.
8.3 ; In the measuring mode MAX/MIN ，press“ ”， “MAX”will appear on the LCD，
the captured maximum readings will be displayed on the LCD, press“ ”again “MIN”will ，
appear on the LCD and the captured minimum readings will be displayed on the LCD. Long
press“ ”，the meter exit MAX/MIN measurement mode and back to normal measuring mode.
8.4 with the meter on it can select temperature, dew point key；
；
；
；； ， ，press“ ”
temperature and wet bulb temperature in turn.
8.5 Use of compound key
；
；
；
；；
8.5.1 With the meter o ter， ，press“ ”first and hold then press“ ”to power on the me ，
it can change temperature unit(°C/°F) is preset. ，℃
8.5.2 With the meter o，press “ ”first and hold，then press“ ”to power on the meter，
“ ”icon on the LCD display disappear, which indicates the power off functions is disabled. You
need to turn off the meter through pressing “ ”by manual.
Note: icon displayed on the screen, it indicates that the meter will automatically turn When“ ”
o after approx. 15 minutes of inactivity.
9 Notes .
1． This meter has already been calibrated before delivery. Do not revise the calibration parameters
without professional personnel and device.
【 】Note The unit has been calibrated before delivery. The recommended calibration period is
one year.
2 Repairs or servicing not covered in this manual should only be performed by qualied ．
personnel.
3 Wipe the unit with a dry soft cloth periodically. Do not use abrasives or solvent on this ．
instrument.
4 Remove the battery when the meter is to be stored for long periods of time to avoid battery ．
leakage.
5 ．When the battery is low.LCD display “ ”, a new battery is needed.
10. Accessories
1．User’s manual
2 1.5V AAA Battery．

Termékspecifikációk

Márka: PCE Instruments
Kategória: Mérőberendezések
Modell: PCE-444

Szüksége van segítségre?

Ha segítségre van szüksége PCE Instruments PCE-444, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Mérőberendezések PCE Instruments

PCE Instruments

PCE Instruments PCE-HT-225A Útmutató

29 Március 2025
PCE Instruments

PCE Instruments PCE-DD-A Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-128 Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-3000UL Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-BPD-C-66A Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-DFG N 5TW Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-MA 100 Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-MA 110 Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-DFG NF 5K Útmutató

28 Március 2025
PCE Instruments

PCE Instruments PCE-LES 103UV Útmutató

28 Március 2025

Útmutatók Mérőberendezések

Legújabb útmutatók Mérőberendezések

Uni-T

Uni-T UT220 Útmutató

3 Április 2025
Uni-T

Uni-T UT681C Útmutató

3 Április 2025
Uni-T

Uni-T UT216C Útmutató

3 Április 2025
Uni-T

Uni-T UT611 Útmutató

3 Április 2025
Uni-T

Uni-T UT210D Útmutató

3 Április 2025
Uni-T

Uni-T UT210C Útmutató

3 Április 2025
Uni-T

Uni-T UT210B Útmutató

3 Április 2025
Uni-T

Uni-T UT682 Útmutató

3 Április 2025
Uni-T

Uni-T UT275 Útmutató

3 Április 2025
Uni-T

Uni-T UT08A Útmutató

3 Április 2025