Használati útmutató Panasonic Viera TX-LR50DT60

Panasonic televízió Viera TX-LR50DT60

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Panasonic Viera TX-LR50DT60 (211 oldal) a televízió kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/211

HELP

English

TX-LR42DT60

TX-LR47DT60

TX-LR50DT60

TX-LR55DT60

TX-LR60DT60

- 2 -

Watching

my Home Screen

• Information 11

• How to use 12

• Settings 13

Basic

• Satellite connection 15

• Basic connection 17

• Selecting channel 19

• Information banner 20

• Option Menu 22

• Subtitle 23

• Off Timer 24

• Last view 24

External equipment

• External connection 25

• Watching external input 28

• Operating with TV’s remote control 29

• HDMI features 31

• Terminal information 32

• Valid input signals 33

For best picture

• Viewing Mode 34

• Ambient Sensor 35

• Auto power standby function 35

• Aspect 35

• Aspect Control Signal 37

• Advanced Settings 38

• Lock Settings 41

• Copy Adjustment 42

For best audio

• Sound mode 43

- 3 -

TV Guide

• Using TV Guide 44

• Timer Programming 46

Teletext

• Viewing Teletext 47

• Teletext mode 48

• Note 50

• 3D Eyewear - Maintenance 50

• Viewing 3D 51

• 3D Mode Selection 52

• 3D Settings 53

• Source image format 55

Tuning and editing channels

• Setting menu 56

• Favourites Edit 56

• Channel List 58

• Auto Setup 59

• Manual Tuning 61

• Update Channel List 63

• New Channel Message 63

• Signal Condition 63

• Selectable satellites 64

Recording

USB HDD setup

• Preparations 65

• Setting for USB HDD 66

Recording current programme

• One Touch Recording 68

• REW LIVE TV 69

Timer Programming

• Setting timer programming 71

- 4 -

• Editing timer programming 73

• Note 74

Technical information

• USB HDD 75

Internet service

Internet content

• Information 76

• Selecting internet content 76

• Note 77

Network connections

• Internet connection 78

• Note 79

Network settings

• Network Connection 80

• Custom - Wireless 81

• Custom - Wired 83

• Network Status 85

• TV Remote App Settings 85

• Network Link Settings 85

• Software Update 85

• New Software Message 85

Home network

DLNA

• Information 86

• Using DLNA 89

Network connections

• DLNA connection 90

• Note 92

Network settings

• Network Connection 93

• Custom - Wireless 94

- 5 -

• Custom - Wired 96

• Custom - Wireless Access Point 98

• Network Status 99

• TV Remote App Settings 99

• Network Link Settings 100

• Software Update 101

• New Software Message 101

Photos

• Selecting file 102

• Viewing photo 103

• Using slideshow 103

Videos

• Selecting file 105

• Watching video 106

• Video Setup 107

• Audio output settings 108

Music

• Selecting file 109

• Playing music 110

• Music Setup 110

DIGA Recorder

• Controlling DIGA Recorder 111

Technical information

• Photo format 112

• Video format 112

• Music format 115

Media Player

Using Media Player

• Information 116

• Selecting device / mode 118

Photo mode

• Selecting file 120

- 6 -

• Viewing photo 120

• Sorting photos 121

• Multi Shot 3D 121

• Using slideshow 122

Video mode

• Selecting file 126

• Watching video 126

• Video Setup 128

• Audio output settings 129

Recorded TV mode

• Selecting content 130

• Watching recorded TV 131

• Grouping contents 132

• Deleting content 132

• Changing device 133

• Chapter List 133

• Audio output settings 133

Music mode

• Selecting file 135

• Playing music 135

• Music Setup 136

Technical information

• Device handling caution 137

• SD Card 137

• USB devices 138

• Photo format 138

• Video format 139

• Music format 142

Functions

APPS List

• Information 143

• How to use 143

- 7 -

• Settings 144

Multi Window

• Information 145

• How to use 145

• Note 147

VIERA Link “HDAVI Control™”

• Summary of VIERA Link 148

• Preparations 152

• Easy playback 152

• Power on Link 153

• Power off Link 153

• Standby Power Save 153

• Intelligent Auto Standby 153

• VIERA Link Control 154

• Speaker Selection 155

• Note 156

Child Lock

• Using Child Lock 157

• PIN number 157

Data Service Application

• Using Data Service Application 158

• Cookie 158

• Note 159

Common Interface

• Caution 160

• Using Common Interface 160

Shipping Condition

• Shipping Condition 162

Updating the TV Software

• Information 163

• Auto update 163

• Manual update 164

- 8 -

Setting characters

• Using numeric buttons 165

Voice Control

• Preparations 166

• How to use 167

Bluetooth devices

• Bluetooth Setup 168

Keyboard / Gamepad

• Keyboard 170

• Gamepad 171

Settings

Setting menu

• How to use 172

Picture

• Viewing Mode 174

• Basic settings 175

• Ambient Sensor 175

• Noise reduction settings 175

• Resolution Remaster 175

• Caption Smoother 176

• Brilliance Enhancer 176

• Intelligent Frame Creation 176

• 24p Smooth Film 176

• Advanced Settings 176

• Option Settings 177

• Screen Settings 178

• 3D Settings 179

• Lock Settings 180

• Copy Adjustment 180

• Reset to Defaults 180

Sound

• Mode 181

- 9 -

• Basic settings 181

• Volume settings 182

• Voice Guidance Settings 183

• Advanced settings 184

• Reset to Defaults 185

Network

• Network Connection 186

• Network Status 186

• TV Remote App Settings 186

• Network Link Settings 186

• Other settings 186

Timer

• Off Timer 187

• Timer Programming 187

• Time Zone 187

• Auto Standby 187

• No signal Power off 187

Setup

• Eco Navigation 188

• Voice Control Settings 188

• USB Device Setup 188

• Recording Setup 188

• VIERA Touch Pad Controller 188

• Bluetooth Setup 188

• Child Lock 188

• Tuning Menu 189

• Language 190

• Display Settings 191

• Common Interface 193

• VIERA Link Settings 193

• Professional Mode (isfccc) 194

• Data Service Application 194

• System Menu 194

• Other Settings 195

- 10 -

Support

FAQs

• Picture 196

• Digital TV 197

• Analogue TV 198

• Sound 199

• 3D 199

• HDMI 200

• Network 201

• Other 202

Maintenance

• Care and Cleaning 204

Information

• Using Help menu 205

Optional accessories

• 3D Eyewear 206

• Communication Camera 206

• Wall-hanging bracket 207

Licence

• Licence 208

OK Letters enclosed in a box indicate remote control buttons.

Menu Letters in cyan indicate on-screen display items.

References in this eHELP

●The images shown in this eHELP are for illustrative purposes only.

- 11 -

Watching

my Home Screen

Information

“my Home Screen” is a gateway to the TV, applications, and more.

It provides easy access to special features such as the Media Player, videos,

games, communication tools, etc. as shown below (example).

HOME

OK HOME

Home Screen

Selected content screen (TV, application, etc.)

Home Screen Selection

– Your preferred Home Screen can be selected or added.

- 12 -

How to use

Home Screen provides access to special features such as the Media Player,

TV, internet content, data services, communication tools, etc.

1. Display Home Screen with HOME

(Example)

●The last viewed Home Screen is displayed when the TV is turned on.

●Press again to select or add your preferred Home Screen layout.

Watching my Home Screen Settings

2. Select a feature with / / / and press to accessOK

●To watch full-screen TV

1) Select the TV viewer with / / /

(Example)

2) Press OK to watch

(Example)

●Also refer to Tutorial from the tool guide.

- 13 -

Settings

Select the setup menu from the tool guide on the top of the screen, or use

coloured button to display the setup menu.

(Example)

■Home Screen Selection

1. Display Home Screen Selection with HOME

(Example)

2. Select the screen with / and press to setOK

Full Screen TV:

Displays full-screen TV

TV Home Screen:

To make your TV experience more convenient and comfortable.

Lifestyle Screen:

Displays the TV with useful information and services for everyday life.

Info Screen:

Enjoy internet content while watching TV.

Add New Screen:

You can add a new screen to personalise.

■Face Recognition

By using the Communication Camera, you can select the registered Home

Screen with face recognition. Please refer to Tutorial from the tool guide.

●Communication Camera is not included. Please purchase as necessary.

Support Optional accessories Communication Camera

- 14 -

■Settings

You can customise any Home Screen. (For example, changing the wallpaper,

renaming freely, editing applications, setting the screen launched when the

TV is turned on, etc.)

1. Select Settings from the tool guide

2. Follow the on-screen instructions

■Search

You can search the content from various features.

1. Select Search from the tool guide

2. Follow the on-screen instructions

= Note =

●To use this function fully, you need a broadband network environment.

Ensure the network connections and network settings are completed.

Internet service Network connections

Internet service Network settings

●Be sure to update the software when a software update notice is displayed

on the TV screen. If the software is not updated, you will not be able to use

my Home Screen. You can update the software later manually.

Internet service Network settings Software Update

- 15 -

Basic

Satellite connection

Please ensure that the unit is disconnected from the mains socket before

attaching or disconnecting any cables.

●For DVB-S

■Dual tuner (DiSEqC)

Connect the both of satellite IN 1 / IN 2 terminals to the satellite dish with Multi

Switcher, and you can watch or record 2 DVB-S programmes simultaneously,

etc.

Satellite IN 1 / IN 2 terminals

Satellite cables with Multi Switcher

Satellite dish

■Dual tuner (Single Cable System)

Connect the satellite IN 1 terminal to the satellite dish with the Single Cable

router, and you can watch or record 2 DVB-S programmes simultaneously,

etc.

Satellite IN 1 terminal

Satellite cable with Single Cable router

Satellite dish

- 16 -

■Single tuner

Connect the satellite IN 1 terminal to the satellite dish.

●Watching or recording 2 DVB-S programmes simultaneously, etc. are not

available.

Satellite IN 1 terminal

Satellite cable

Satellite dish

= Note =

●To ensure your satellite dish is correctly installed, please consult your local

dealer. Also consult the received satellite broadcasting companies for details.

●Selectable satellites and dish alignment to tune DVB-S channels

Watching Tuning and editing channels Selectable satellites

●External equipment and cables shown are not supplied with this TV.

●Keep the TV away from electronic equipment (video equipment, etc.) or

equipment with an infrared sensor, otherwise distortion of image / sound

may occur or operation of other equipment may be affected.

●Check the terminal type and cable plugs are correct when connecting.

- 17 -

Basic connection

Please ensure that the unit is disconnected from the mains socket before

attaching or disconnecting any cables.

■Aerial

Terrestrial / cable terminal

RF cable

Terrestrial aerial or cable

●For DVB-C, DVB-T, Analogue

■DVD Recorder / VCR

Terrestrial / cable terminal

RF cable

DVD Recorder / VCR

Terrestrial aerial or cable

AV1 (SCART) terminal

SCART cable

– AV1 (SCART) adaptor (supplied) is necessary when connecting to the

TV.

- 19 -

Selecting channel

1. Display the screen with TV Selection TV

2. Select the mode with / and press to setOK

DVB-S DVB-C DVB-T / / / Analogue

●The selectable modes vary depending on the channels stored.

●You can also select the mode pressing TV repeatedly on the remote

control or INPUT/OK/HOLD for MENU button on the control panel of

the TV.

●If the menu is not displayed, press TV Selection TV to switch the mode.

3. Select a channel with Channel Up / Down or numeric buttons

●Press the numeric buttons to select a channel position with 2 or more-

digit (e.g. 399, press ).

■To select a channel from the channel list

1. Display the channel list with OK

2. Select a channel from the list with / and press to watchOK

●To sort channel names in alphabetical order

(red)

●To change the category

(blue)

■To select a channel using information banner

1. Display information banner with if it is not displayed

2. Select a channel with / and press to watch while the banner is OK

displayed

Watching Basic Information banner

■To select a channel using TV Guide

1. Display TV Guide with GUIDE

2. Select the current programme or channel with / / / and press

OK to access

3. Select View with / and press to access (DVB)OK

– The current programme is displayed on the top left of the screen.

- 20 -

4. Press OK to exit TV Guide

Watching TV Guide Using TV Guide

■To watch pay-TV

●For information of the encrypted channels

Functions Common Interface Using Common Interface

●Consult the operator / broadcaster or CI module manufacturer for more

information and conditions of the services.

Information banner

Display information banner with .

●Also appears when changing a channel.

(Example)

Channel position and name

Channel type (Radio, HDTV, etc.) / encrypted channel ( ) / TV mode ( ,

, , )

Programme

Programme start / finish time (except Analogue)

Channel position, etc. (Analogue)

Progress time indicator of the selected programme (except Analogue)

Category

●To change the category (DVB)

1) Display the category list with (blue)

2) Select the category with / and press to changeOK

Current time

Features available / message meanings

Sound mute is on

Bad signal:

Poor quality TV signal

- 24 -

Off Timer

Turn the TV Standby mode automatically after a fixed period.

1. Display the menu with MENU

2. Select Timer Off Timer with / and press to accessOK

3. Select the time in 15-minute increments with / and press to setOK

90 75 60 45 30 15 minutes / / / / / / Off ( )

●To cancel, set to or turn the TV off.Off

●The remaining time displays on the information banner.

Watching Basic Information banner

●When the remaining time is less than 3 minutes, the remaining time will

flash on the screen.

Last view

Switch to a previously viewed channel or input mode easily with LAST VIEW.

●Press again to return to the current view.

= Note =

●Watching less than 10 seconds is not reflected in the previously viewed

channel or input mode.

- 25 -

External equipment

External connection

These diagrams show our recommendations for connection of your TV to

various pieces of equipment. For other connections, consult the instructions

for each piece of equipment.

●For basic connection

Watching Basic Basic connection

●To use the specific devices supporting Bluetooth wireless technology

Functions Bluetooth devices

●Check the terminal type and cable plugs are correct when connecting.

■HDMI equipment

HDMI terminal

Fully wired HDMI compliant cable

Recorder / Player / 3D compatible player / Set top box / Camcorder /

Amplifier with speaker system

= Note =

●For VIERA Link connections

Functions VIERA Link “HDAVI Control™” Summary of VIERA Link

●Use HDMI2 for connecting an amplifier. This connection is applicable

when using an amplifier that has ARC (Audio Return Channel) function.

- 26 -

■AV devices

AV2 (COMPONENT) terminals

Component cables

– AV2 (COMPONENT / VIDEO) adaptor (supplied) is necessary.

DVD player

AV2 (VIDEO) terminals

Composite cables

– AV2 (COMPONENT / VIDEO) adaptor (supplied) is necessary.

Camcorder / Game equipment

■USB devices

USB port

USB cable

USB HDD / Communication Camera

= Note =

●It is recommended to connect the devices to the TV’s USB ports directly.

- 27 -

●You cannot use two or more of the same kind of USB devices

simultaneously except USB Flash Memory or USB HDD.

●Use USB 3 port for connecting the USB HDD.

●Use USB 1 port for connecting the Communication Camera.

●Some USB devices or USB HUB may not be used with this TV.

●You cannot connect any devices by using USB card reader.

●Additional information for the devices may be on the following website.

(English only)

http://panasonic.net/viera/support

■To listen with speakers

DIGITAL AUDIO

Optical digital audio cable

Amplifier with speaker system

●To enjoy the sound from the external equipment in multi-channel sound

(e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For the

connections, read the manuals of the equipment and amplifier.

■Headphones

Headphone jack

M3 stereo mini plug

Headphones

●To adjust volume, set Headphone Volume.

Settings Sound Volume settings

- 28 -

Watching external input

Connect the external equipment (VCRs, DVD equipment, etc.) and you can

watch through the input.

1. Display the input selection menu with AV

2. Select the input mode connected to the equipment with / and press

OK to watch (The selected mode is displayed on the top left of the screen)

●TV receives input signals automatically connecting with SCART when

playback starts.

– Input signals are automatically identified by the SCART (pin 8) terminal.

– This function is also available for HDMI connections.

– When input mode is not switched automatically, perform as above or

check the setup of the equipment.

●You can also select the input pressing AV on the remote control or

INPUT/OK/HOLD for MENU button on the control panel of the TV. Press

repeatedly until the desired input is selected.

●To switch between COMPONENT and in VIDEO AV2, select with / .

●You can label or skip each input mode. Skipped inputs will not be

displayed when AV is pressed. ( )Input Labels

Settings Setup Display Settings

●The remote control is capable of operating the contents or external

equipment.

Watching External equipment Operating with TV’s remote control

●To return to TV mode

= Note =

●If the external equipment has an aspect adjustment function, set it to .16:9

●For details, read the manual of the equipment or ask your local dealer.

- 29 -

Operating with TV’s remote control

You can operate the contents in Media Player / media server, recording

functions or the connected equipment with the below buttons of this TV’s

remote control.

Playback videocassette / DVD / video content

Stop the operations

Rewind, view the picture rapidly in reverse (VCR)

Skip to the previous track, title or chapter (DVD / video content)

Rewind, view the picture rapidly in reverse (VCR)

Search backward (DVD / video content)

Fast-forward, view the picture rapidly forward (VCR)

Skip to the next track, title or chapter (DVD / video content)

Fast-forward, view the picture rapidly forward (VCR)

Search forward (DVD / video content)

Pause / Resume

Press and hold to play at slow speed (DVD)

One Touch Recording

Recording Recording current programme One Touch Recording

■How to change the code

Each Panasonic product has its own remote control code. Change the code

according to the product for operation.

1. Press and hold Standby On / Off switch during the following operations

- 30 -

2. Enter the appropriate code as follows with numeric buttons

●Codes for each product and features

70: DVD Recorder, DVD Player, Blu-ray Disc Player

71: Player theatre, Blu-ray Disc theatre

72: VCR

73 (default):

Using in USB HDD recording, Media Player, DLNA features,

product using in VIERA Link

3. Press to change

= Note =

●Confirm if the remote control works correctly after changing the code.

●The codes may be reset to defaults if batteries are replaced.

●Some operations may not be available depending on the equipment.

- 31 -

HDMI features

HDMI (high-definition multimedia interface) is the world’s first complete digital

consumer AV interface complying with a non-compression standard.

HDMI allows you to enjoy high-definition digital images and high-quality

sound by connecting the TV and the equipment.

HDMI-compatible equipment with an HDMI or DVI output terminal, such as a

DVD player, a set top box or game equipment, can be connected to the HDMI

terminal using an HDMI compliant (fully wired) cable.

Watching External equipment External connection

: The HDMI logo is displayed on HDMI-compliant equipment.

■Applicable HDMI features

●Input audio signal:

2ch Linear PCM (sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz)

●Input video signal:

Matches the output setting of the digital equipment.

Watching External equipment Valid input signals

●VIERA Link (HDAVI Control 5)

Functions VIERA Link “HDAVI Control™” Summary of VIERA Link

●Content Type

●Deep Colour

●Audio Return Channel

– Audio Return Channel (ARC) is a function to send digital sound signals

via an HDMI cable.

– For HDMI2 terminal

●3D

■DVI connection

If the external equipment has only a DVI output, connect to the HDMI terminal

via a DVI to HDMI adaptor cable. When using the DVI to HDMI adaptor cable,

connect the audio cable to the audio input terminal (use AV2 audio terminals).

●AV2 (COMPONENT / VIDEO) adaptor (supplied) is necessary when

connecting to the AV2 audio terminals.

●Enquire HDMI adaptor cable at your local digital equipment retailer shop.

= Note =

●Audio settings can be made on in the Sound Menu.HDMI1 / 2 / 3 Input

- 32 -

Settings Sound Advanced settings

●If the connected equipment has an aspect adjustment function, set the

aspect ratio to “16:9”.

●These HDMI connectors are “type A”.

●These HDMI connectors are compatible with HDCP (High-Bandwidth

Digital Content Protection) copyright protection.

●Equipment having no digital output terminal may be connected to the input

terminal of component or video to receive analogue signals.

●This TV incorporates HDMI™ technology.

Terminal information

■AV1 SCART terminal (RGB, VIDEO)

1 : Audio out (R)

2 : Audio in (R)

3 : Audio out (L)

4 : Audio earth

5 : Blue earth

6 : Audio in (L)

7 : Blue in

8 : Status CVBS

9 : Green earth

10: --

11 : Green in

12: --

13: Red earth

14: Earth

15: Red in

16: Status RGB

17: CVBS earth

18: RGB status earth

19: CVBS out (video)

20: CVBS in (video)

21: Socket Earth

- 33 -

■HDMI terminal

1 : TMDS Data2+

2 : TMDS Data2 Shield

3 : TMDSData2−

4 : TMDS Data1+

5 : TMDS Data1 Shield

6 : TMDSData1−

7 : TMDS Data0+

8 : TMDS Data0 Shield

9 : TMDSData0−

10: TMDS Clock+

11 : TMDS Clock Shield

12: TMDSClock−

13: CEC

14: Utility

15: SCL

16: SDA

17: DDC/CEC Ground

18: +5V Power

19: Hot Plug Detect

Valid input signals

■COMPONENT (Y, Pb, Pr), HDMI

Signal name COMPONENT HDMI

525 (480) / 60i, 60p ○ ○

625 (576) / 50i, 50p ○ ○

750 (720) / 60p, 50p ○ ○

1,125 (1,080) / 60i, 50i ○ ○

1,125 (1,080) / 60p, 50p, 24p ○

○:Applicableinputsignal

= Note =

●Signals other than above may not be displayed properly.

●The above signals are reformatted for optimal viewing on your display.

- 34 -

For best picture

Viewing Mode

1. Display the menu with MENU

2. Select Picture with / and press to accessViewing Mode OK

3. Select the mode with / and press to setOK

Viewing Mode

( / / / Dynamic Normal Cinema True Cinema Custom Professional1 / / /

Professional2)

Selects your favourite picture mode for each input.

Dynamic:

Improves contrast and sharpness for viewing in a bright room.

Normal:

Normal use for viewing in a normal lighting condition.

Cinema:

Improves the performance of contrast, black and colour reproduction

for watching movies in a darkened room.

True Cinema:

Reproduces the original image quality precisely without any revision.

Custom:

Adjusts each menu item manually to suit your favourite picture quality.

Professional1 / 2:

Allows you to set and lock the professional picture settings.

Watching For best picture Advanced Settings

●This mode is available only when in the Professional Mode (isfccc)

Setup Menu is set to .On

●If the certified professional dealer sets these modes, Professional1

and may be displayed as and .Professional2 isf Day isf Night

In each Viewing Mode, , , , Backlight Contrast Brightness Colour, Tint,

Sharpness, Colour Temperature, Vivid Colour, Adaptive Backlight Control,

Ambient Sensor, , Noise Reduction MPEG Remaster, Resolution Remaster,

Caption Smoother, Brilliance Enhancer, and Intelligent Frame Creation 24p

Smooth Film can be adjusted and stored.

When in True Cinema Custom Professional1 / 2, or mode, Advanced Settings

can be adjusted additionally. The settings in True Cinema Custom, or

- 35 -

Professional1 / 2 mode can be stored for each input.

●You can set in 2D and 3D mode for each.Viewing Mode

Ambient Sensor

1. Display the menu with MENU

2. Select Picture Ambient Sensor with / and press to accessOK

3. Select On / Off with / and press to setOK

Ambient Sensor

( / )On Off

●Automatic Brightness Control function

Adjusts picture settings automatically depending on ambient lighting conditions.

Auto power standby function

The TV will automatically go into Standby mode in the following conditions:

●Off Timer is active.

Watching Basic Off Timer

●No operation is performed for 4 hours while Auto Standby On is set to .

Settings Timer Auto Standby

●No signal is received and no operation is performed for 10 minutes while

No signal Power off On is set to .

Settings Timer No signal Power off

= Note =

●This function does not affect the recording of Timer Programming One and

Touch Recording.

Aspect

Change the aspect ratio (image size) with ASPECT.

■To change the aspect ratio manually

1. Display Aspect Selection list with ASPECT

2. Select the mode with / and press to setOK

●You can also change the mode pressing ASPECT.

(Press repeatedly until you reach the desired mode.)

Auto:

The best ratio is selected automatically according to the “Aspect Control

Signal”.

- 36 -

Watching For best picture Aspect Control Signal

16:9:

Directly displays the image at 16:9 without distortion (anamorphic).

14:9:

Displays the image at the standard 14:9 without distortion.

Just:

Displays a 4:3 image full-screen. Stretching is only noticeable at the left

and right edges.

4:3:

Displays the image at the standard 4:3 without distortion.

Zoom:

Displays a 16:9 letterbox or 4:3 image without distortion.

4:3 Full:

Displays a 4:3 image enlarged horizontally to fit the screen.

●For HD (High definition) signals

Sidecut Just:

Displays a 16:9 letterbox (anamorphic) image full-screen. Stretching is

only noticeable at the left and right edges.

●For HD (High definition) signals

Sidecut Zoom:

Displays a 16:9 letterbox (anamorphic) image full-screen without distortion.

●For HD (High definition) signals

= Note =

●Display the image (TV, external input, etc.) full-screen to use this function

completely.

●Aspect mode can be memorised separately for SD (Standard definition)

and HD (High definition) signals.

●Aspect cannot be changed in teletext service and 3D format signals.

- 37 -

Aspect Control Signal

Programmes usually contain an “Aspect Control Signal” (Widescreen signal,

Control signal through SCART / HDMI terminal).

In Auto mode, aspect mode will appear in the top left of the screen if a

Widescreen signal (WSS) or a Control signal through SCART (pin8) / HDMI

terminal is found. The aspect will switch to the appropriate ratio.

Watching For best picture Aspect

■Available conditions

●Satellite terminal (WSS only)

Valid input signal format:

DVB-S

●Terrestrial / cable terminal (WSS only)

Valid input signal format:

DVB-C

DVB-T

PAL D, K

SECAM D, K

Invalid input signal format:

PAL 525/60 6.5 MHz

PAL 525/60 6.0 MHz

PAL 525/60 5.5 MHz

M.NTSC 6.5 MHz

M.NTSC 6.0 MHz

M.NTSC 5.5 MHz

●AV1 (SCART) / AV2 (VIDEO) terminals

Valid input signal format:

PAL

SECAM

PAL 525/60

M.NTSC

NTSC

: Control signal through SCART (pin 8) / HDMI terminal only

- 39 -

Expander Clear White Effect White Balance Colour Management / / / /

Gamma with / and press to accessOK

3. Set with / / / and press to storeOK

■Adaptive Gamma Control

Adaptive Gamma Control

Adjusts the gamma curve to make the image brighter.

●Not valid when Adaptive Backlight Control is set to Off

■Black Expander

Black Expander

Gradually adjusts the shades of black.

■Clear White Effect

Clear White Effect

Makes the white area clearer.

■White Balance

R-Gain G-Gain B-Gain / /

Adjusts the white balance of bright red / green / blue areas.

R-Cutoff G-Cutoff B-Cutoff / /

Adjusts the white balance of dark red / green / blue areas.

More Detailed Adjustment

Adjusts more detailed White Balance items.

Input Signal Level:

Adjusts the input signal level.

R-Gain G-Gain B-Gain / / :

Adjusts the detailed white balance of bright red / green / blue areas.

Reset to Defaults:

Resets to the default detailed White Balance.

- 40 -

Reset to Defaults

Resets to the default White Balance.

■Colour Management

R-Hue R-Saturation R-Luminance / /

Adjusts the picture hue / saturation / luminance of red areas.

G-Hue G-Saturation G-Luminance / /

Adjusts the picture hue / saturation / luminance of green areas.

B-Hue B-Saturation B-Luminance / /

Adjusts the picture hue / saturation / luminance of blue areas.

More Detailed Adjustment

Adjusts more detailed Colour Management items.

Y-Hue C-Hue M-Hue / / :

Adjusts the picture hue of yellow / cyan / magenta areas.

Y-Saturation C-Saturation M-Saturation / / :

Adjusts the saturation of yellow / cyan / magenta areas.

Y-Luminance C-Luminance M-Luminance / / :

Adjusts the luminance of yellow / cyan / magenta areas.

Reset to Defaults:

Resets to the default detailed Colour Management.

Reset to Defaults

Resets to the default Colour Management.

■Gamma

Gamma

( / / / / )2.6 2.4 2.2 2.0 1.8

Switches the gamma curve.

●Please note the numerical values are reference for the adjustment.

- 41 -

More Detailed Adjustment

Adjusts more detailed Gamma items.

Input Signal Level:

Adjusts the input signal level.

Gain:

Adjusts the gain of gamma for selected signal level.

Reset to Defaults:

Resets to the default detailed Gamma.

Reset to Defaults

Resets to the default Gamma.

■Reset to Defaults

Reset to Defaults

Resets Advanced Settings to the default settings.

Lock Settings

Locks the settings of mode for each input.Professional1 / 2

1. Display the menu with MENU

2. Select Picture with / and press to accessLock Settings OK

3. Enter the PIN number (4 digits) with numeric buttons

●Enter the PIN number twice at first setting.

●Make a note of the PIN number in case you forget it.

4. Select Adjustment Lock with / and press to accessOK

5. Select On with / and press to setOK

●Backlight Contrast Brightness Colour, , , , Tint Sharpness Colour , ,

Temperature Vivid Colour, , Adaptive Backlight Control Resolution ,

Remaster, Caption Smoother, Brilliance Enhancer, Advanced Settings and

Reset to Defaults in the Picture Menu can be locked.

■To change the PIN number

1. Select Change PIN with / and press to accessOK

2. Enter a new PIN number twice with numeric buttons

- 42 -

Copy Adjustment

Copies the picture settings of True Cinema Custom Professional1, , or

Professional2 to those of another input or another Viewing Mode.

1. Display the menu with MENU

2. Select Picture / Copy Adjustment Destination Viewing Mode

Destination Input with / and press to accessOK

3. Select the destination to copy to with / and press to setOK

4. Select Copy Start with / and press to copyOK

5. When the confirmation screen is displayed, select with Yes / and

press to setOK

= Note =

●Option Settings Screen Settings 3D Settings, and will not be copied.

●You cannot copy to the locked mode.

- 43 -

For best audio

Sound mode

1. Display the menu with MENU

2. Select Sound with / and press to accessMode OK

3. Select the mode with / and press to setOK

Mode

( / / Standard Music Ambience User / )

Selects your favourite sound mode for each input.

Standard:

Provides the suitable sound quality for all types of scenes.

Music:

Improves sound quality for watching music videos, etc.

Ambience:

Improves spatial effects and provides clear sounds.

User:

Adjusts the sounds manually using the equaliser to suit your favourite

sound quality.

●In each mode, , Bass Treble Surround Bass Boost Digital Remaster, , and

can be adjusted and stored.

●For the User mode, will be available in the Sound Menu instead Equaliser

of and Bass Treble Equaliser. Select and adjust the frequency.

Settings Sound Basic settings

●This function is effective only for the sound from TV speakers.

- 44 -

TV Guide

Using TV Guide

TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing

of the programmes currently broadcast and the forthcoming broadcasts over

the next seven days (depending on the broadcasters).

1. Display the screen with TV Selection TV

2. Select the mode with / and press to setOK

DVB-S DVB-C DVB-T / / / Analogue

3. Press GUIDE to view TV Guide

●Press again to change the layout ( / ).Landscape Portrait

– View Landscape to see several channels.

– View Portrait to see one channel by time.

●You can select the TV Guide type. ( )Default Guide

Settings Setup Display Settings

– If you set to , the channel list will appear Default Guide Channel List

when pressing .GUIDE

(Example)

TV screen

TV Guide date

TV Guide time

Programme

(DVB-T) / D A (Analogue)

Channel position and name

- 46 -

●To exit TV Guide

EXIT

= Note =

●When this TV is turned on for the first time, or the TV is switched off for

more than a week, it may take some time before TV Guide is completely

shown.

●DVB-T and Analogue channels are displayed on the same TV Guide

screen. and D A may be displayed to distinguish DVB-T and Analogue

channels. There will be no programme listings for Analogue channels.

Timer Programming

The Timer Programming menu allows you to choose programmes that you

want to remind watching or record to the USB HDD. At the correct time, the

TV will tune to the correct channel even if the TV is in Standby mode.

1. Select the forthcoming programme or channel with / / / and

press to accessOK

2. Select USB HDD Rec. Reminder / with / and press to setOK

●To check / change / cancel a timer programming event

Recording Timer Programming Editing timer programming

●LED will turn to orange in Standby mode if Timer Programming is set.

●To return to TV Guide

BACK/RETURN

●If you select the current programme, a confirmation screen asking

whether you want to watch or record the programme appears. Select

Timer Programming USB HDD Rec. with / and press to set OK to

record from the time you finish the timer programming event setting.

● is displayed on the TV Guide screen if Timer Programming is set

from TV Guide.

= Note =

●Not valid in Analogue mode

●Timer Programming only works reliably if correct time information is

received via the signal from the broadcaster or service provider.

●Depending on the progress of recording, analogue channel may not be

selected.

●When recording programmes to the USB HDD, be sure to format the USB

HDD and enable it to record in .USB Device Setup

Recording USB HDD setup

- 47 -

Teletext

Viewing Teletext

1. Switch to teletext with TEXT

●Displays the index page (content varies depending on the

broadcasters).

●Current / sub page numbers are displayed on the top left of the screen.

●Time / date is displayed on the top right of the screen.

●Colour bar is displayed on the bottom of the screen.

2. Select the page with numeric buttons, / or

(Coloured buttons)

●To adjust contrast

1) Press MENU three times to display Contrast

2) Adjust with / and press to setOK

●To exit teletext

EXIT

■Reveal hidden data

1. Press MENU

2. Reveal with (red)

●Press again to rehide.

■To view a favourite page stored

Press STTL to view a favourite page.

●Call up the page stored on (blue) (List mode).

●Factory setting is “P103”.

■FULL / TOP / BOTTOM

1. Press MENU

2. Press (green) to change the layout

- 48 -

■Watch TV and teletext in two windows at once

1. Press MENU twice

2. Set Picture and text On to / Off with /

●Operations can be made only in teletext screen.

■Store frequently viewed pages in the colour bar (List mode)

1. Press (Coloured buttons) while the page is displayed

2. Press and hold OK

●The stored page number changes to white.

●To change stored pages

1) Press (Coloured buttons) to change

2) Enter a new page number with numeric buttons

3) Press and hold OK

■View sub page

The number of sub pages is displayed on the top of the screen. Press /

to view sub page. (Only when teletext has more than one page.)

●The number of sub pages varies depending on the broadcasters (up to 79

pages).

●Searching may take time while you are watching TV.

●To view a specific sub page

1) Press MENU

2) Press (blue)

3) Enter the 4-digit number (e.g. P6, press )

Teletext mode

Teletext services are the text information provided by the broadcasters.

●The features may vary depending on the broadcasters.

1. Display the menu with MENU

2. Select Setup Display Settings Teletext with / and press to OK

access

3. Select TOP (FLOF) List / with / and press to setOK

Settings Setup Display Settings

- 50 -

Note

●Display the image (TV, external input, etc.) full-screen for viewing 3D.

●Do not exert pressure on or scratch the lens of the 3D Eyewear.

●3D content will not be correctly visible if the 3D Eyewear is worn upside

down or back-to-front.

●When viewing 3D images, make sure your eyes are at an approximately

horizontal level and keep a position where you do not see double images.

●Do not wear the 3D Eyewear when watching something other than 3D

images. Liquid crystal displays (such as computer screens, digital clocks

or calculators, etc.) may be difficult to see while wearing the 3D Eyewear.

●Do not use the 3D Eyewear as sunglasses.

●3D effects may be perceived differently depending on the person.

3D Eyewear - Maintenance

■Storing and cleaning the 3D Eyewear

●Store the 3D Eyewear in a cool, dry place.

●Clean using a soft, dry cloth.

– Wiping the 3D Eyewear with a cloth that is covered in dust or dirt may

scratch the eyewear. Shake off any dust from the cloth before use.

– The lens of the 3D Eyewear is easily broken. Be careful when cleaning

the lens.

●Do not use benzene, thinner or wax on the 3D Eyewear, otherwise this

may cause peeling of the paint.

●Do not dunk the 3D Eyewear in liquid such as water.

- 51 -

Viewing 3D

You can enjoy viewing 3D images with contents or programmes

corresponding to the 3D effect by wearing the 3D Eyewear.

●This TV supports Frame Sequential, Side by Side and Top and Bottom 3D

formats.

– Frame Sequential is the 3D format that the images for the left and right

eyes are recorded with the high definition quality and alternately played

back.

1. Put the 3D Eyewear on

2. View the 3D images

●Safety precautions will be displayed when you first watch the 3D image.

Select or to continue to view 3D images.Yes No

If you select , this message will be displayed again in the same Yes

condition after Mains power On / Off switch is next turned on. Select No

if you do not want to display this message again.

■Playing back 3D-compatible Blu-ray disc (Frame Sequential

format)

●Connect the 3D-compatible player via a fully wired HDMI compliant cable.

(If you use the non 3D-compatible player, the images will be displayed in

2D mode.)

●If the input mode is not switched automatically, select the input mode

connected to the player.

Watching External equipment Watching external input

■3D-supported broadcast

●Please consult the suppliers of contents or programmes for availability of

this service.

■3D photos and 3D videos taken by 3D-compatible Panasonic

products

●Available in Media Player and Network services

Media Player

Home network

■2D images converted to 3D

●Set to mode in .2D 3D 3D Mode Selection

Watching 3D 3D Mode Selection

- 52 -

3D Mode Selection

You can easily change the viewing mode between 2D and 3D with .3D

1. Display the screen with 3D Mode Selection 3D

2. Select the mode with / and press to setOK

●Items of vary depending on the condition.3D Mode Selection

3D 2D / :

Displays the appropriate image as you desire without selecting 3D format.

●This mode may not work properly depending on the source image

format. In this case, select the appropriate 3D format manually.

■To change 3D format manually

When the image is not changed properly using / mode, use this 3D 2D

manual setting.

1. Display the screen with 3D Mode Selection (Manual) (red) during

above operation

2. Select the mode with / and press to setOK

Original:

Displays the source image as it is.

●Use to identify the format type of the source image.

Watching 3D Source image format

Side by Side - 3D Side by Side - 2D Top and Bottom - 3D / / /

Top and Bottom - 2D:

Displays the mode you select.

●Not valid in Analogue and AV mode

2D 3D:

Converts 2D images into 3D.

●Please note the 3D images appear slightly different from the originals.

●Using this function for profit-making purposes, or publically showing

images converted from 2D to 3D in places such as shops or hotels

etc. may infringe on the rights of the copyright holder protected under

- 53 -

3D Settings

1. Display the menu with MENU

2. Select Picture with / and press to access3D Settings OK

3. Select one of the following items with / and press to accessOK

3D Detection 3D Signal Message 2D / / 3D Depth / 3D Adjustment /

L/R Picture Swap Edge Smoother Safety Precautions / /

4. Set with / / / and press to storeOK

●To exit the menu screen

EXIT

3D Detection

( / / )On (Advance) On Off

Selects whether to switch to the 3D mode automatically or not.

On (Advance):

Detects all the 3D format signals and displays the 3D image

automatically.

On:

Detects the particular 3D format signals (Frame Sequential, etc.) and

displays the 3D image automatically.

●To view 3D images without any notifications and operations, set to On

(Advance).

3D Signal Message

( / )On Off

Selects whether to give a notification message when a signal of 3D format is

found or not.

●Not valid when is set to 3D Detection On (Advance)

●For DVB, Component and HDMI input

2D 3D Depth

( / / )Max Mid Min

Selects a level of 3D-image depth for viewing converted 2D images.

3D Adjustment

( / )On Off

Adjustment of the 3D effect (except in 2D 3D mode).

- 54 -

Set to to enable setting.On Effect

●When setting to , a safety precaution message will appear. Read it On

carefully and press to go to setting.BACK/RETURN Effect

●When adjusting, take into account that the vision of 3D images varies

among different individuals.

Effect:

Adjusts the 3D depth according to the contents or to your preference.

(This setting will not be memorised when changing the input mode or

channel.)

L/R Picture Swap

( / L/R (Normal) R/L (Reversed))

Swaps pictures for left eye and right eye (except in 2D 3D mode).

Select R/L (Reversed) if you feel that the sense of depth is unusual.

●This setting will not be memorised when changing the input mode or

channel.

Edge Smoother

( / )On Off

Set to if you feel the contoured parts of an image are not smooth enough On

(except in 2D 3D mode).

Safety Precautions

Displays the precautions for viewing 3D images.

= Note =

●Display the image (TV, external input, etc.) full-screen to use this function

completely.

- 55 -

Source image format

If the picture appears to be abnormal, refer to the table of images that can be

seen for each and the source image format, and 3D Mode Selection (Manual)

select the correct 3D mode.

●3D images are displayed correctly with appropriate 3D format as following

yellow boxes.

Source image format

Side by Side

Top and Bottom

Normal format (2D)

3D Mode Selection

Original

Side by Side - 3D

Top and Bottom - 3D

2D 3D

: When selecting or Side by Side - 2D Top and Bottom - 2D, the images will

be displayed without 3D effect.

●Depending on the player or broadcasts, the image may be different from

the above illustrations.

- 56 -

Tuning and editing channels

Setting menu

You can retune channels, create your favourite channel lists, skip unwanted

channels, etc.

1. Display the screen with TV Selection TV

2. Select the mode with / and press to setOK

DVB-S DVB-C DVB-T / / / Analogue

3. Display the menu with MENU

4. Select Setup Tuning Menu with / and press to accessOK

DVB-S Tuning Menu DVB-C Tuning Menu DVB-T Tuning Menu / / /

Analogue Tuning Menu

●The menu name varies depending on the TV mode.

5. Select one of the functions with / and press to accessOK

Favourites Edit Channel List / / Auto Setup / Antenna System /

LNB Configuration / Manual Tuning / / Update Channel List

New Channel Message Signal Condition /

●The function items vary depending on the country you select.

Settings Setup Tuning Menu

Favourites Edit

■List favourite DVB channels

Create your favourite channel lists from various broadcasters (up to 4:

Favourites 1 4 to ).

The DVB Favourites lists are available from in the information Category

banner and the TV Guide screen.

Watching Basic Information banner

Watching TV Guide Using TV Guide

1. Select Favourites Edit with / and press to accessOK

2. Select a channel to list from all DVB channels with /

● appears when the channel is encrypted.

●To display other Favourites

(green)

●To sort channel names in alphabetical order

(red)

- 57 -

●To change the category

(blue)

3. Press OK to add it to Favourite List

●To add all channels to the list

1) Press (yellow)

2) Press (green) to add all

●To add consecutive channels to the list at once

1) Press (yellow)

2) Make the channel block with / and press to addOK

4. Press BACK/RETURN OK and to store

■Edit DVB Favourites list

You can edit the favourites list while the cursor is on the channel in the

favourites list.

●To move the channel

1) Select the channel with /

2) Press (green)

3) Select the new position with / or numeric buttons

4) Press (green) to store

●To delete the channel

1) Select the channel with /

2) Press OK to delete

– Press (yellow) to delete all channels

●To name the Favourites

1) Press (red)

2) Enter characters (maximum 10 characters) with / / / or

numeric buttons, and press to setOK

3) Press BACK/RETURN to store

- 58 -

Channel List

■Skip unwanted DVB / Analogue channels

You can hide (skip) unwanted channels. The hidden channels cannot be

displayed except in this function.

1. Select Channel List with / and press to accessOK

2. Select a channel with /

3. Press OK to set / (skip)Reveal Hide

:Reveal

: (skip)Hide

●To reveal all channels (DVB / Analogue)

(yellow)

●To sort channel names in alphabetical order (DVB)

(red)

●To change the category (DVB)

(blue)

■Edit DVB / Analogue Channels

●To swap / move the channel position (if available)

1) Press (green) to edit

2) Set the new position with / or numeric buttons, and press

(green) to store

●To retune each channel (Manual Tuning)

(red)

– For Analogue mode

Watching Tuning and editing channels Manual Tuning

– Only for the revealed channels

●To rename the channel name (Analogue)

1) Press (blue) to edit

2) Enter characters (maximum 5 characters) with / / / or

numeric buttons, and press to setOK

- 60 -

– If you set to or , select from LNB AA and MiniDiSEqC Single Cable

AB.

– If you set to , select from LNB AA, AB, BA and BB.DiSEqC 1.0

2) Set Satellite for the selected LNB

– Select No Satellite if you do not know the connected satellite

(available satellite will be searched in Auto Setup).

– Select User defined to set Test Transponder Frequency manually.

– If you set to , additional settings are required. Set Single Cable User

Band User Band Frequency PIN, and (depending on the Single

Cable router you use). For details, read the manual of the Single

Cable router.

Watching Tuning and editing channels Selectable satellites

5. Press BACK/RETURN to store

6. Select Auto Setup with / and press to accessOK

7. Select Satellite Search Mode Scan Mode / / with / and press to OK

access

8. Set with / and press to storeOK

●Scan Mode

Full:

Scans the whole frequency range.

Quick:

Scans the suitable frequency for the selected satellite.

●After settings, select with / and press to search.Start scan OK

9. The confirmation screen is displayed and press to start OK Auto Setup

(Settings are made automatically)

●When the operation is completed, the channel at the lowest position will

be displayed.

■DVB-C, DVB-T, Analogue channels

1. Select Auto Setup with / and press to accessOK

2. Set DVB-C Auto Setup Settings with / / / and press to store OK

(DVB-C)

●Scan Mode

Full:

Scans the whole frequency range.

Quick:

Scans the suitable frequency in your country.

- 61 -

●Normally set Frequency, and to Symbol Rate Network ID Auto. If Auto

is not displayed or if necessary, enter each value specified by your

cable provider with numeric buttons.

●After settings, select with / and press to search.Start scan OK

3. The confirmation screen is displayed and press to start OK Auto Setup

(Settings are made automatically)

●When the operation is completed, the channel at the lowest position will

be displayed.

■Auto Setup using the buttons on the TV

1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to

display the menu

2. Set Auto Setup with following control panel buttons

●Move the cursor / select from a range of options / select the menu item

(up and down only)

●Access the menu / store settings after adjustments have been made or

options have been set with INPUT/OK/HOLD for MENU button.

Manual Tuning

●Normally use Auto Setup Update Channel List or to retune DVB channels.

●If tuning has not been done completely or for adjusting the direction of the

aerial or dish, use this function. (DVB)

●All DVB channels found will be added to .Channel List

■DVB-S

1. Select Satellite with / and set with /

●Please consult the received satellite broadcasting companies for the

setting.

2. Select Transponder Frequency Symbol Rate Polarisation Modulation / / / /

Service ID with / and set with / or numeric buttons

3. Select Start scan with / and press to searchOK

- 62 -

■DVB-C

1. Enter the frequency with numeric buttons

●Normally set and to Symbol Rate Service ID Auto.

2. Select Start scan with / and press to searchOK

■DVB-T

1. Select a channel with / and adjust frequency with / for each

channel

●Set where the level of becomes the maximum.Signal Quality

2. Press OK to search

■Analogue

Set Analogue channel manually after Auto Setup.

1. Select the channel position with numeric buttons

2. Select the channel with Channel Up / Down button

3. Search with /

4. Select Store with / and press to setOK

●Use Fine Tuning to make small adjustments to the tuning of an individual

programme (affected by weather conditions, etc.).

●If a VCR is connected only with the RF cable, select channel position .0

- 63 -

Update Channel List

By updating the DVB channel list, you can add new channels, delete removed

channels or change channel names and positions automatically.

●The channel list is updated while keeping your settings in , Favourites Edit

Channel List Child Lock, , etc.

●Depending on the signal condition, the update may not work properly.

●To update DVB-S channels, set , and Satellite Search Mode Scan Mode

before updating.

1) Select Satellite Search Mode Scan Mode / / with / and press OK

to access

2) Set each item with / and press to storeOK

3) After settings, select with Start scan / and press to searchOK

New Channel Message

Selects whether to give a notification message when a new DVB channel is

found or not.

●When a notification message appears, you can perform Update Channel

List pressing .OK

Signal Condition

Selects a channel and checks the signal condition.

A good Signal Strength is not an indication of suitable signal for DVB

reception.

●Use the Signal Quality indicator as follows.

– Green bar: Good

– Yellow bar: Poor

– Red bar: Bad (Check the terrestrial aerial, cable or satellite dish)

●Vertical lines show the maximum signal value of the selected channel.

●To change the channel

●For DVB mode

- 65 -

Recording

USB HDD setup

Preparations

You can record the digital TV programmes to the connected USB HDD and

enjoy playing back in various ways.

●Prepare the USB HDD for the exclusive use of recording with this TV.

●Connect the USB HDD to the USB 3 port with the USB cable.

●Be sure to connect the USB HDD to the socket outlet.

●To remove the USB HDD safely from the TV, perform Safely remove USB

in .USB Device Setup

Recording USB HDD setup Setting for USB HDD

●Check the terminal type and cable plugs are correct when connecting.

USB port

USB cable

USB HDD

Socket outlet

= Caution =

●All data in the USB HDD will be erased in the following cases:

– When formatting the USB HDD with this TV

Recording USB HDD setup Setting for USB HDD

– When formatting the USB HDD to use on PC, etc.

●When the TV is repaired due to a malfunction, you may have to format

the USB HDD again with this TV to use it. (All data will be erased after

formatting.)

●In order to use the USB HDD with your PC after recording with this TV,

format it again on your PC. (Special operations or tools may be necessary

to format on your PC. For details, read the manual of the USB HDD.)

●The data recorded on the USB HDD with this TV can only be played back

on this TV. You cannot play back its contents with another TV (including

- 66 -

the TV of the same model number) or any equipment.

●Do not turn the TV off, pull out the mains plug or remove the USB HDD

during operation (formatting, recording, etc.). Doing so may cause

malfunction of the device or damage the recorded data. (An electric

outage may also be a cause of malfunction.)

= Note =

●Analogue TV programme cannot be recorded on the USB HDD.

●The data broadcasting (MHEG, etc.), radio broadcasting will not be

recorded, and also the recording function will not work during the period

without any signal.

●Not all the programmes can be recorded depending on the broadcaster

and service provider.

●You cannot copy the recorded contents of the USB HDD.

●The recorded content may not be played back properly while 2 recordings

are in progress.

●For more information of the USB HDD

Recording Technical information USB HDD

Setting for USB HDD

Format and set up the USB HDD with this TV in order to use it for recording.

All the USB devices recognised as a mass storage device will be listed.

●Please note that USB HDD will be formatted and all data in it will be

erased after this setup.

●Before setting, connect the USB HDD and be sure to turn on the USB

HDD.

Recording USB HDD setup Preparations

1. Display the menu with MENU

2. Select Setup with / and press to accessUSB Device Setup OK

3. Select the USB HDD for recording with / and press to start setupOK

●Some USB HDD may not be displayed.

●To display information of the highlighted device

4. When the caution and confirmation screen for using USB HDD is

displayed, select with / and press to proceedYes OK

5. When the confirmation screen of USB HDD name is displayed, select Yes

with / and press to setOK

- 67 -

●The name for the USB HDD is created automatically. If you want to edit

the name, select .Yes

1) Enter characters with / / / or numeric buttons, and press

OK to set

2) Press BACK/RETURN to store

6. When the confirmation screen to enable USB HDD for recording is

displayed, select with Yes / and press to setOK

●If another formatted USB HDD for recording already exists, this

confirmation screen will be displayed to switch to enable this USB HDD

for recording.

●Mode of the USB HDD

: The USB HDD is available for recording / playing back. Only one

USB HDD on the list is available for recording.

: The USB HDD is available for playing back.

●To change the mode

●To edit USB HDD name

(green)

●To format

(red)

●To remove the USB HDD safely from the TV

(yellow)

= Note =

●You can only select one USB HDD for recording at a time.

●You cannot change the settings for the USB HDD while recording is in

progress.

●Ensure that Dual Tuner Mode is set to in On Auto Setup to record

2 programmes simultaneously in DVB-S mode.

Watching Tuning and editing channels Auto Setup

- 68 -

Recording current programme

One Touch Recording

Records the current programme to the USB HDD immediately.

● Confirm the remote control code is “73”.

Watching External equipment Operating with TV’s remote control

1. Display the menu with MENU

2. Select Setup Recording Setup One Touch Recording with / and

press to accessOK

3. Select the maximum recording time / / / / ( ) with 30 60 90 120 180 minutes

/ and press to setOK

■ To start One Touch Recording

Press to start.

● Other channels cannot be selected while recording is in progress.

■ To stop recording in progress

Press to stop.

■ To play back or delete the recorded contents

TV programmes recorded by One Touch Recording can be played back in

Media Player.

1. Display icons of the feature with APPS

2. Select Recorded TV with / / / and press to accessOK

Media Player Recorded TV mode

● Even if One Touch Recording is in progress, you can play back all the

contents. (Depending on the USB HDD, playback may not be possible or

the recording may not work properly during playback.)

- 69 -

REW LIVE TV

Records the current programme to the USB HDD constantly within the

maximum recordable time.

●Confirm the remote control code is “73”.

Watching External equipment Operating with TV’s remote control

1. Display the menu with MENU

2. Select Setup with / and press Recording Setup REW LIVE TV

OK to access

3. Select Auto with / to start REW LIVE TV

●When you select Auto, recording will start automatically.

●This recording will not start if another recording is in progress, TV signal

condition is bad or there are no images displayed.

■To operate REW LIVE TV

●To pause

●To search backward (up to 90 minutes)

●After pausing or searching backward, the following buttons are available

for operation.

: Search backward

: Search forward

: Return to the current programme

OK : Playback / Pause

: Search backward / forward

: Pause / Resume

: Playback

: Return to the current programme

■To stop REW LIVE TV

1. Display the menu with MENU

2. Select Setup with / and press Recording Setup REW LIVE TV

OK to access

3. Select Off with / to stop REW LIVE TV

- 72 -

(Example)

!: Overlapped timer programming events

Function

( / )USB HDD Rec. Reminder

TV mode

S: DVB-S

C: DVB-C

D: DVB-T

– You cannot change the mode within the menu.

Channel position and name

: Timer Programming<TIMER>

: Displays subtitles (if available)STTL

– Press (yellow) to indicate subtitles and press again to

remove them.

– For Reminder

Date (You can set one day ahead with , select daily or weekly with

)

– : Sunday to SaturdayDaily Sun-Sat

– : Monday to SaturdayDaily Mon-Sat

– : Monday to FridayDaily Mon-Fri

– Weekly Sat / Fri / Thu / Wed / Tue / Mon / Sun: Same time on the

same day every week

Starting time / Ending time / Duration (automatic display)

4. Store with OK

- 73 -

Editing timer programming

1. Display the menu with MENU

2. Select Timer Timer Programming with / and press to accessOK

3. Select the event with /

● To change a timer programming event

– Correct as necessary.

Recording Timer Programming Setting timer programming

● To delete a timer programming event

1) Press (red)

2) Press OK to delete

● To display subtitles (if available)

(yellow)

– Press again to remove subtitles.

– For Reminder

● To cancel a timer programming event temporarily

(blue)

– Press again to stop cancelling.

■ To stop recording

1. Press

2. Select the programme with / and press to access (when 2 OK

recordings are in progress)

3. Select Yes with / and press to stopOK

■ To play back or delete the recorded contents

TV programmes recorded on the USB HDD with this TV can be played back

in Media Player.

1. Display icons of the feature with APPS

2. Select Recorded TV with / / / and press to accessOK

Media Player Recorded TV mode

● The recorded content may not be played back properly while 2 recordings

are in progress.

- 74 -

Note

● TV Guide may also be used to set timer programming event.

Watching TV Guide Timer Programming

● Timer Programming can store up to 15 events.

● Timer Programming only works reliably if correct time information is

received via the signal from the broadcaster or service provider.

● For recording using Timer Programming, the TV must be either on or in

Standby. For reminders to be displayed, the TV must be on.

● Depending on the progress of recording, analogue channel may not be

selected.

● Recording an encrypted (copy-protected) programme may not be possible.

● 2 minutes before the starting time, a reminder message may appear if you

are watching TV.

– To remove the message and start the programming, press .OK

– To cancel the programming, press EXIT.

● LED will turn to orange in Standby mode if Timer Programming is set.

● Timer Programming reminder messages will remain displayed until one of

the following occurs:

– You press to view the programme or to cancel the reminder.OK EXIT

– The timer programming event that the reminder is set for ends.

● “!” identifies that three or more timer programming events are overlapped.

USB HDD Rec. Reminder is given priority over . As for the overlapped

recording events, the first event starts and finishes as programmed. The

next event can then start.

● The recording of Timer Programming may automatically change the

channel to the programmed channel a few seconds before the starting

time.

● The recording of Timer Programming will be performed even if the TV is

in recording. In this case, recording will be REW LIVE TV REW LIVE TV

cancelled.

Recording Recording current programme REW LIVE TV

● For more information of the USB HDD

Recording Technical information

- 75 -

Technical information

USB HDD

■ USB HDD

(for recording the digital TV programmes with this TV)

● The capacity of USB HDD that works with this TV is from 160 GB to 3 TB.

● Connect the USB HDD to the socket outlet to record and play back

properly with this TV.

● Use the USB HDD formatted with this TV.

Recording USB HDD setup Setting for USB HDD

● Regarding performance, not all USB HDDs are guaranteed. Check the

USB HDDs that have been tested for compatibility with this TV at the

following website. (English only)

http://panasonic.net/viera/support

= Note =

● Data modified with a PC may not be displayed.

● Do not remove the device while the TV is accessing data. Otherwise this

can damage the device or TV.

● Do not touch the pins on the device.

● Do not subject the device to a high pressure or impact.

● Insert the device in the correct direction. Otherwise this can damage the

device or TV.

● Electrical interference, static electricity, or erroneous operation may

damage the data or device.

- 76 -

Internet service

Internet content

Information

You can access some specific websites supported by Panasonic, and enjoy

internet contents such as videos, games, communication tools, etc. from

APPS List.

(Example)

●To enable this function, you need a broadband network environment.

Ensure the network connections and network settings are completed.

Internet service Network connections

Internet service Network settings

Selecting internet content

1. Display APPS List with APPS

●For details of APPS List

Functions APPS List

●Depending on the usage conditions, it may take a while to read all the

data.

2. Select the desired item with / / / and press to accessOK

(Example)

●To return to APPS List

APPS

●To exit APPS List

EXIT

- 77 -

● You may operate the internet contents with the free cursor and Voice

Control function of the VIERA Touch Pad Controller (supplied).

Functions Voice Control

● You can connect a keyboard and a gamepad for character input and

playing games in the applications. You can also use the keyboard or

gamepad for TV operation as well as for APPS List.

Functions Bluetooth devices

Functions Keyboard / Gamepad

● Video communication (for example Skype™) requires an exclusive

Communication Camera TY-CC20W. For details, read the manual of

the Communication Camera.

Support Optional accessories Communication Camera

Note

● If you cannot access the internet contents, check the network connections

and settings.

Internet service Network connections

Internet service Network settings

● APPS List is subject to change without notice.

● Not all the features of the websites are available.

● Be sure to update the software when a software update notice is displayed

on the TV screen. If the software is not updated, you will not be able to use

APPS List. You can update the software later manually.

Internet service Network settings Software Update

● The services through APPS List are operated by their respective service

providers and such service may be discontinued either temporarily or

permanently without notice. Therefore, Panasonic will make no warranty

for the contents or the continuity of the services.

● Some contents may be inappropriate for some viewers.

● Some contents may only be available for specific countries and may be

presented in specific languages.

● Depending on the connection environment, the internet connection may be

slow or may not be successful.

● During the operation, audio signal is output from DIGITAL AUDIO and

HDMI2 (ARC function) terminals. But no video signals are output. To use

HDMI2 with ARC function, connect an amplifier that has ARC function and

set to use theatre speakers.

Functions VIERA Link “HDAVI Control™”

- 78 -

Network connections

Internet connection

To use internet service, you need a broadband network environment.

● If you do not have any broadband network services, please consult your

retailer for assistance.

● Dial-up internet connections cannot be used.

● Required speed (effective): at least 1.5 Mbps for SD (Standard Definition)

and 6 Mbps for HD (High Definition) picture quality, respectively. If the

transfer speed is not enough, contents may not be played back properly.

■ Wireless connection

Built-in wireless LAN (Rear of the TV)

Access point

Internet environment

■ Wired connection

ETHERNET terminal

LAN cable (Shielded)

● Use the Shielded Twist Pair (STP) LAN cable.

Internet environment

- 79 -

Note

● Ensure to use a LAN straight cable.

● Set up and connect equipment required for the network environment. You

cannot make such settings on this TV. Read the manual of the equipment.

● If your modem has no broadband router functions, use a broadband router.

● If your modem has broadband router functions but there are no vacant

ports, use a hub.

● Ensure that the broadband routers and hubs are compatible with

10BASE-T / 100BASE-TX.

● If you use the equipment compatible only with 100BASE-TX, category 5 or

later LAN cables are required.

● Contact your Internet Service Provider (ISP) or telecommunications

company for further assistance regarding the network equipment.

● Confirm the terms and conditions of the contracts with your Internet

Service Provider (ISP) or telecommunications company. Depending on the

contracts, additional fees may be charged or multiple connections to the

internet may be impossible.

● Turn the TV off, and then on again when changing or making the network

connection again.

- 81 -

● To set manually

Internet service Network settings Custom - Wireless

■ Quick setup - Wired

1. Display the menu with MENU

2. Select Network Network Connection with / and press OK to access

3. Select Quick setup with / and press to accessOK

4. Automatically setup is done and the screen is displayedNetwork Status

Internet service Network settings Network Status

5. Select Exit with / and press to setOK

● To set manually

Internet service Network settings Custom - Wired

Custom - Wireless

Ensure the connections are completed before starting network setup.

Internet service Network connections

1. Display the menu with MENU

2. Select Network with / / Network Connection Custom Wireless

/ and press to accessOK

● Confirm the encryption key, settings and position of your access point

before starting setup. For details, read the manual of the access point.

3. Select your desired access point with / and press to accessOK

● Available Wireless Networks are displayed automatically.

: Encrypted access point

● For WPS(Push button)

1) Press (red)

2) Press the WPS button on the access point until the light flashes

3) Connect the TV with the access point with OK

– WPS: Wi-Fi Protected Setup™

– If the connection has failed, check the settings and positions of your

access point. And then, follow the on-screen instructions.

● For WPS(PIN)

1) Press (green)

2) Enter the PIN code to the access point

3) Connect the TV with the access point with OK

- 84 -

● Available settings are displayed automatically.

● To set manually, select and set / / IP Address Subnet Mask Default

Gateway / DNS Address.

Proxy Settings

● It is not required for normal household use.

● Some internet services may not be available depending on the proxy

settings.

Proxy:

This is the address of the relay server connected between the browser

and the target server and sends data to the browser.

1) Select Proxy with / and press to accessOK

2) Enter the address with / / / or numeric buttons, and press

OK to set

3) Press BACK/RETURN to store

Proxy Port:

This number is also specified by the provider with the Proxy address.

1) Select Proxy Port with /

2) Enter the number with numeric buttons

3) Press BACK/RETURN to store

4. Select Network Status with / and press to accessOK

Internet service Network settings Network Status

5. Select Exit with / and press to setOK

Termékspecifikációk

Márka:	Panasonic
Kategória:	televízió
Modell:	Viera TX-LR50DT60

Szüksége van segítségre?

Ha segítségre van szüksége Panasonic Viera TX-LR50DT60, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók televízió Panasonic

Panasonic TX-32E302B Útmutató

4 Április 2025

Panasonic TX-50CSF637 Útmutató

4 Április 2025

Panasonic TX-20LA2P Útmutató

4 Április 2025

Panasonic TC-15LV1L Útmutató

12 Január 2025

Panasonic Viera TH-42PX45B Útmutató

12 Január 2025

Panasonic TB-32S45 Útmutató

7 Január 2025

Panasonic TB-40S45 Útmutató

7 Január 2025

Panasonic TB-43W60 Útmutató

7 Január 2025

Panasonic TV-65W93AE8 Útmutató

5 Január 2025

Panasonic TB-55W60AEY Útmutató

26 December 2024

Útmutatók televízió

Legújabb útmutatók televízió

Samsung QN65Q80B Útmutató

5 Április 2025

Samsung QN43LS03BAF Útmutató

5 Április 2025

Samsung QA50LS03AAW Útmutató

5 Április 2025

Samsung QA75LS03AAJ Útmutató

5 Április 2025

Samsung QN50LS03BAF Útmutató

5 Április 2025

Samsung QN43QN90B Útmutató

5 Április 2025

Samsung QA55LS03AAJ Útmutató

5 Április 2025

Samsung QA85LS03AAJ Útmutató

5 Április 2025

Samsung UA75AU7000U Útmutató

5 Április 2025

Samsung QN65LS03BAFXZA Útmutató

5 Április 2025