Használati útmutató Panasonic TB-65W60AEY
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Panasonic TB-65W60AEY (42 oldal) a televízió kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/42
OPERATING INSTRUCTIONS
TB-43W60AEY
TB-50W60AEY
TB-55W60AEY
TB-65W60AEY
LED TV
You can find instructions for your TV’s features in the E-Manual. To access
the E-Manual Manuals, enter Settings>System>More menu, select and
press OK Info. For quick access press Settings button and then button.
e-MANUAL
English - 1 -
Contents
Safety Information 2 ...................................................
Markings on the Product.......................................... 2
Maintenance 4 ............................................................
Display panel, Cabinet, Pedestal............................. 4
Mains plug 4 ...............................................................
Assembling / Removing the pedestal 4 ......................
When using the wall-hanging bracket...................... 5
Environmental Information....................................... 5
Features 6 ..................................................................
Ultra HD (UHD) 6 ........................................................
High Dynamic Range (HDR) / Hybrid Log-Gamma
(HLG) 6 .......................................................................
Dolby Vision 6 .............................................................
Accessories Included............................................... 6
Standby Mode Picture 6 .............................................
Standby Notifications 7 ...............................................
TV Control & Operation 7 ...........................................
Watching TV ............................................................ 8
Inserting the Batteries into the Remote 9 ...................
Power Connection 9 ...................................................
Antenna Connection 9 ................................................
Licence Notification 10 ...............................................
Disposal of Old Equipment and Batteries 10 ..............
Declaration of Conformity (DoC) 10 ...........................
UK Declaration of Conformity (DoC) ..................... 11
Sales and Support Information .............................. 11
Specification 12 ..........................................................
Notice 13 ....................................................................
Remote Control 14 .....................................................
Connections........................................................... 15
Switching On/Off 16 ....................................................
First Time Installation............................................. 16
Media Playback via USB Input 18 ..............................
Media Browser....................................................... 18
FollowMe TV .......................................................... 19
CEC 19 .......................................................................
Game Mode 20 ...........................................................
E-Manual 20 ...............................................................
Settings Menu Content 21 ..........................................
General TV Operation ........................................... 28
Using the Channel List 28 ..........................................
Configuring Parental Settings 28 ................................
Electronic Programme Guide 28 ................................
Teletext Services (where available) 29 .......................
MHEG Teletext ...................................................... 29
BBC Red Button+ (RB+)........................................ 30
Software Upgrade.................................................. 30
Troubleshooting & Tips .......................................... 30
HDMI Signal Compatibility 31 .....................................
Supported File Formats for USB Mode 32 .................
Video File Formats 32 ................................................
Picture File Formats 32 ..............................................
Audio File Formats 32 ................................................
Subtitle File Formats.............................................. 32
Supported DVI Resolutions 33 ...................................
Connectivity 34 ...........................................................
Wired Connectivity................................................. 34
Wireless Connectivity 34 ............................................
Handling of the customer information 36 ....................
Networked Standby Mode 36 .....................................
Wireless Display 36 ....................................................
Connecting Bluetooth Devices 36 ..............................
Connectivity Troubleshooting ................................ 37
Using Audio Video Sharing Network Service 38 .........
Apps 38 ......................................................................
Freely Platform 38 ......................................................
Internet Browser 39 ....................................................
HBBTV System...................................................... 39
DVB functionality information 40 ................................
Important Instruction 41 ..............................................
English - 2 -
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Note: Follow the on screen instructions for operating the related
features.
In extreme weather (storms, lightning) and long inactivity
periods (going on holiday) disconnect the TV set from the
mains.
The mains plug is used to disconnect TV set from the mains
and therefore it must remain readily operable. If the TV set is
not disconnected electrically from the mains, the device will
still draw power for all situations even if the TV is in standby
mode or switched off.
IMPORTANT - Please read these instructions
fully before installing or operating
WARNING: This device is intended to be used
by persons (including children) who are
capable / experienced of operating such a device
unsupervised, unless they have been given
supervision or instruction concerning the use of
the device by a person responsible for their safety.
• Use this TV set at an altitude of less than 5000 metres
above the sea level, in dry locations and in regions
with moderate or tropical climates.
• The TV set is intended for household and similar
indoor use but may also be used in public places.
• For ventilation purposes, leave at least 5cm of free
space around the TV.
• The ventilation should not be impeded by covering
or blocking the ventilation openings with items, such
as newspapers, table-cloths, curtains, etc.
• The power cord/plug should be easily accessible. Do
not place the TV, furniture, etc. on the power cord.
A damaged power cord/plug can cause fire or give
you an electric shock. Handle the power cord by the
plug, do not unplug the TV by pulling the power cord.
Never touch the power cord/plug with wet hands as
this could cause a short circuit or electric shock.
Never make a knot in the power cord or tie it with
other cords. When damaged it must be replaced, this
should only be done by qualified personnel.
• Do not expose the TV to dripping or splashing of
liquids and do not place objects filled with liquids,
such as vases, cups, etc. on or over the TV (e.g. on
shelves above the unit).
• Do not expose the TV to direct sunlight or do not
place open flames such as lit candles on the top of
or near the TV.
• Do not place any heat sources such as electric
heaters, radiators, etc. near the TV set.
• Do not place the TV on the floor or inclined surfaces.
• To avoid danger of suffocation, keep plastic bags
out of the reach of babies, children and domestic
animals.
• Carefully attach the stand to the TV. If the stand is
provided with screws, tighten the screws firmly to
prevent the TV from tilting. Do not over-tighten the
screws and mount the stand rubbers properly.
• Do not dispose of the batteries in fire or with
hazardous or flammable materials.
WARNING
• Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
• Excessive sound pressure from earphones or
headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen, push anything
into holes, slots or any other openings in the TV.
Caution Serious injury or death risk
Risk of electric shock Dangerous voltage risk
Maintenance
Important maintenance
component
Markings on the Product
The following symbols are used on the product as
a marker for restrictions and precautions and safety
instructions. Each explanation shall be considered
where the product bears related marking only. Note
such information for security reasons.
Class II Equipment: This appliance is
designed in such a way that it does not require
a safety connection to electrical earth.
Hazardous Live Terminal: The marked
terminal(s) is/are hazardous live under normal
operating conditions.
i
Caution, See Operating Instructions: The
marked area(s) contain(s) user replaceable
coin or button cell batteries.
CLASS 1
LASER PRODUCT
Class 1 Laser Product: This
product contains Class 1
laser source that is safe under
reasonably foreseeable
conditions of operation.
English - 3 -
WARNING
• Do not ingest the battery, Chemical Burn Hazard.
• This product or the accessories supplied with the
product may contain a coin/button cell battery. If the
coin/button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead
to death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely,
stop using the product and keep it away from
children.
• If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
– – – – – – – – – – – –
A television may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be
avoided by taking simple precautions such as:
• ALWAYS use cabinets or stands or mounting
methods recommended by the manufacturer of the
television set.
• ALWAYS use furniture that can safely support the
television set.
• ALWAYS ensure the television set is not overhanging
the edge of the supporting furniture.
• ALWAYS educate children about the dangers of
climbing on furniture to reach the television set or
its controls.
• ALWAYS route cords and cables connected to your
television so they cannot be tripped over, pulled or
grabbed.
• NEVER place a television set in an unstable location.
• NEVER place the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set
to a suitable support.
• NEVER place the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
• NEVER place items that might tempt children to
climb, such as toys and remote controls, on the top
of the television or furniture on which the television
is placed.
• The equipment is only suitable for mounting at
heights≤2m.
If the existing television set is going to be retained and
relocated, the same considerations as above should
be applied.
– – – – – – – – – – – –
Apparatus connected to the protective earthing of the
building installation through the MAINS connection or
through other apparatus with a connection to protective
earthing – and to a television distribution system using
coaxial cable, may in some circumstances create a fire
hazard. Connection to a television distribution system
has therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator).
WALL MOUNTING WARNINGS
• Read the instructions before mounting your TV on
the wall.
• The wall mount kit is optional. You can obtain from
your local dealer, if not supplied with your TV.
• Do not install the TV on a ceiling or on an inclined
wall.
• Use the specified wall mounting screws and other
accessories.
• Tighten the wall mounting screws firmly to prevent
the TV from falling. Do not over-tighten the screws.
– – – – – – – – – – – –
• Using other wall-hanging brackets, or installing
a wall-hanging bracket by yourself have the risk
of personal injury and product damage. In order
to maintain the unit’s performance and safety, be
absolutely sure to ask your dealer or a licensed
contractor to secure the wall-hanging brackets. Any
damage caused by installing without a qualified
installer will void your warranty.
• Carefully read the instructions accompanying
optional accessories, and be absolutely sure to take
steps to prevent the TV from falling off.
• Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
• Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
• To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
DAMAGES
•Excepting cases where responsibility is recognised by
local regulations, Panasonic accepts no responsibility
for malfunctions caused by misuse or use of the
product, and other problems or damages caused by
use of this product.
•Panasonic accepts no responsibility for loss, etc., of
data caused by disasters.
•External devices separately prepared by the custo -
mer are not covered by the warranty. Care for the
data stored in such devices is the responsibility of
the customer. Panasonic accepts no responsibility
for abuse of this data.
Figures and illustrations in these operating
instructions are provided for reference only and
may differ from the actual product appearance.
Product design and specifications may be changed
without notice.
English - 5 -
Environmental Information
This television is designed to be environmentally
friendly. To reduce energy consumption, you can
follow these steps:
If you set the Energy Saving to , , Minimum Medium
Maximum Auto or the TV will adjust the energy
consumption accordingly. Set as to turn this setting Off
off. If you like to set the backlight to a fixed value
set as , highlight (will be located Custom Backlight
under the setting) and then adjust Energy Saving
manually using the Left or Right directional buttons
on the remote.
Note: Available Energy Saving options may differ depending
on the selected in the menu. Mode Settings>Picture
The Energy Saving settings can be found in the
Settings>Picture menu. Go to Home screen and
highlight Settings in the Navigation Carousel and
press OK to access the Settings menu. Note that
some picture settings will be unavailable to be
changed.
YoucanalsoturnthescreenoffusingtheScreen Off
option,ifyouwanttohearthesoundonlyanddon't
need to watch. If pressed Right button or Left button
consecutively Screen Off option will be selected and
“Screen will be off in 15 seconds.”messagewillbe
displayedonthescreen.SelectProceed and press
OK to turn the screen off immediately. If you don’t
press any button, the screen will be off in 15 seconds.
Press any button on the remote or on the TV to turn
the screen on again.
Note: Screen Off option is not available if the Mode is set
to . Game
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce or stop the energy consumption.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking
the TV.
• Put the TV onto a work table with the screen panel
down on the clean and soft cloth. Leave the stand(s)
protruding over the edge of the surface.
• Unscrew the screws that fixing the stand(s).
• Remove the stand(s).
When using the wall-hanging bracket
Please contact your local Panasonic dealer to
purchase the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation;
Rear of the TV
a
b
43” 50” 55” 65”
a (mm) 100 200 200 400
b (mm) 100 200 200 200
View from the side
c
VESA
Bracket
e
d
( (d) e)
43” 50”
55”
43” 50”
55”
Diameter M4 M6 M4 M6
Depth of screw (c) min. 7 mm 5 mm
max. 10 mm 6 mm
( (
d) e)
65”
Depth of screw (c) min. 7 mm
max. 10 mm
Diameter M6
Note: The screws for fixing the TV onto the wall-hanging
bracket are not supplied with the TV.
English - 6 -
Features
• Remote controlled colour TV
• Fully integrated digital terrestrial/cable/satellite TV
(DVB-T-T2/C/S-S2)
• HDMI inputs to connect other devices with HDMI
sockets
• USB input
• OSD menu system
• Stereo sound system
• Teletext
• Headphone connection
• Automatic programming system
• Manual tuning
• Automatic power down after up to eight hours.
• Sleep timer
• Child lock
• Automatic sound mute when no transmission.
• NTSC playback
• AVL (Automatic Volume Limiting)
• PLL (Frequency Search)
• Game Mode (Optional)
• Picture off function
• Ethernet (LAN) for Internet connectivity and service
• 802.11 a/b/g/n built in WLAN Support
• Audio Video Sharing
• HbbTV
Ultra HD (UHD)
TV supports Ultra HD (Ultra High Definition - also
known as 4K) which provides resolution of 3840 x
2160 (4K:2K). It equals 4 times the resolution of Full
HD TV by doubling the pixel count of the Full HD
TV both horizontally and vertically. Ultra HD content
is supported via native and market applications,
HDMI, USB input(s) and over DVB-T2 and DVB-S2
broadcasts.
High Dynamic Range (HDR) / Hybrid Log-Gamma
(HLG)
Using this feature the TV can reproduce greater
dynamic range of luminosity by capturing and then
combining several different exposures. HDR/HLG
promises better picture quality thanks to brighter, more
realistic highlights, more realistic colour and other
improvements. It delivers the look that filmmakers
intended to achieve, showing the hidden areas of
dark shadows and sunlight with full clarity, colour
and detail. HDR/HLG content is supported via native
and market applications, HDMI, USB inputs and over
DVB-S broadcasts. Set the related HDMI source
input as from the option in the Enhanced Sources
Settings>System menu in order to watch HDR/HLG
content, if the HDR/HLG content is received through
an HDMI input. The source device should also be at
least HDMI 2.0a compatible in this case.
Dolby Vision
Dolby Vision™ delivers a dramatic visual experience,
astonishing brightness, exceptional contrast, and vivid
colour, that brings entertainment to life. It achieves this
stunning image quality by combining HDR and wide
colour gamut imaging technologies. By increasing the
brightness of the original signal and using a higher
dynamic colour and contrast range, Dolby Vision
presents amazing true-to-life images with stunning
detail that other post-processing technologies in the TV
aren’t able to produce. Dolby Vision is supported via
native and market applications, HDMI and USB inputs.
Set the related HDMI source input as Enhanced from
the Sources option in the Settings>System menu in
order to watch Dolby Vision content, if the Dolby Vision
content is received through an HDMI input. The source
device should also be at least HDMI 2.0a compatible
in this case. In the menu Settings>Picture>Mode
two predefined picture modes will be available if Dolby
Vision content is detected: Dolby Vision Bright and
Dolby Vision Dark. Both allow the user to experience
the content in the way the creator originally intended
with different ambient lighting conditions.
Accessories Included
• Remote Control
• Batteries: 2 x AAA
• Power Cord
• Quick Start Guide
• Detachable stand
• Stand mounting screws (M4 x 12 mm)
Standby Mode Picture
You can use your TV as a digital picture frame using
the Standby Mode Picture feature. In order to do this
follow the steps below.
• Set the option in the Standby Mode Picture Set -
tings System More On> > menu as . This option is
set as by default. You can also define interval for Off
standby mode picture slideshow using the Standby
Mode Picture Interval option in this menu.
• Create a separate folder named as standby_picture
intheUSBstoragedevice'srootdirectoryandcopy
the files you want to use into that folder and then
connect the USB storage device to your TV.
• Press the Standby button on the remote briefly to
switch your TV into standby mode picture state.
Note that once the option is Standby Mode Picture
set as , the function of the button on the On Standby
remote will change. After this you will need to press
English - 7 -
and hold the button to switch the TV into standby mode
while the TV is in normal operating mode.
If there are more than 1 picture file available in the
folder all picture files will be displayed as a slide show
in succession. If the necessary folder is not created
orthereisn'tanypicturefileinthefolder,awarning
message will be displayed on the screen for a few
seconds and then disappear.
In standby mode picture state the backlight level of the
screen will be decreased by 50 % and Smart Center
features will not be usable, if Smart Center is available
for your TV model.
To switch your TV from standby mode picture state
back to normal operating mode press the Standby
button on the remote briefly.
Beside the remote control you can also use the control
unit on the TV to switch into standby mode picture
state and back to normal operating mode. In order to
do that follow the same instructions as described in the
TV Control & Operation section for switching the TV
into the standby mode. Note that you will not be able to
switch the TV into standby mode using the control unit
on the TV while the TV is in standby mode picture state.
Note: The availability of this feature depends on the TV model
and its features.
Refer to the section Supported File Formats for USB Mode
for the supported media file formats.
Standby Notifications
If the TV does not receive any input signal (e.g. from
an aerial or HDMI source) f nutes, it will go or 3 mi
into standby. When you next switch-on, the following
message will be displayed: “TV switched to stand-by
mode automatically because there was no signal
for a long time.” You can disable this functionality
by setting the option in the Timer of No Signal
Settings>Devices menu accordingly.
The Auto Power Down option (in the Settings>System
>More menu) could have been set to a value between
1 and 8 hours by default. If this setting is not set as Off
and the TV has been left on and not been operated
during the set time, it will switch into standby mode
after the set time has expired. When you next switch-on
the TV, the following message will be displayed: “TV
switched to stand-by mode automatically because
no operation was made for a long time.” Before the
TV switches into standby mode a dialogue window will
be displayed. If you do not press any button the TV
will switch into the standby mode after a waiting period
of about 5 minutes. You can highlight and press Yes
OK to switch the TV into standby mode immediately.
If you highlight and press , the TV will remain No OK
on. You can also choose to cancel the Auto Power
Down Disable function from this dialogue. Highlight
and press , the TV will remain on and the function OK
will be set as . You can enable this function again by Off
changing the setting of the option Auto Power Down
from the menu. Settings>System>More
TV Control & Operation
This TV has a joystick as shown in the above drawing. It
allows you to control the Volume / Programme / Source
and Turn Off - On functions of the TV.
Note: The position of the joystick may differ depending on
the model.
To change volume: Increase or decrease the volume
by pushing the joystick right or left.
To change channel: Scroll through the stored
channels by pushing the joystick forwards or pulling
it towards yourself.
To change source: Press the centre of the joystick
in, the sources list will appear on the screen. Scroll
through the available sources by pushing the joystick
forwards or pulling it towards yourself.
To turn the TV off (Hard Standby): Press the centre
of the joystick in and hold it down for more than 3
seconds, the TV will turn into hard standby mode.
In hard standby mode the remote control will not
function and the standby LED on the TV will not lit.
The functions such as networked standby mode (if
available) and timers will be disabled. You can turn on
the TV from the hard standby only via joystick.
To turn on the TV: Press the centre of the joystick in,
the TV will turn on.
Note: Main menu OSD cannot be displayed via joystick.
Operation with the Remote Control
Press the TiVo button on your remote control to display
Home screen. Use the directional buttons and OK
button to navigate and set. Press Back/Return to quit
a menu screen.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources. Press the
Source button on your remote control consecutively
to select the different sources.
Changing Channels and Volume
You can change the channel and adjust the volume
by using the Programme +/- and Volume +/- buttons
on the remote.
English - 8 -
Reset and Power Off via Standby Button
Press and hold the button to see additional Standby
actions for this button. Restart Standby , (Normal
Standby), and (Forced Standby) options will Power off
be available. Highlight one and press to perform OK
the selected action. If a problem occurs that prevents
the TV from switching into standby mode properly, you
can use the option to force the TV to switch Power off
into standby mode.
If your TV stops responding to commands and the
actions menu can not be displayed, the TV will be forced
to restart when the button is kept pressed for about 5
seconds. This will terminate the process.
Watching TV
1. Home
The Home screen is your starting point for browsing.
It gathers all the TV shows and movies that matter to
you - trending titles on all your streaming apps, recently
watched shows, live TV channels, and recommended
shows based on your ratings and viewing habits.
Content in each carousel changes dynamically based
on your usage. Even carousel categories update
as TiVo OS gets to know you better. For example,
based on what you’ve been watching, you might see
a Comedy Movies or Health & Fitness carousel one
day and an Oscar Winners carousel a few days later.
1.1. My Apps Carousel
The My Apps carousel on the Home screen contains
all the apps from which TiVo OS is making TV show
and movie recommendations. You can select the apps
that appear here on the screen.Manage Apps
When you prefer searching and browsing for shows
within an app, select the app in this carousel and press
OK on your remote control to open it.
1.2. Manage Apps Screen
Use the screen to control which apps Manage Apps
TiVo OS uses to recommend titles from on the Home,
TV Shows, and Movies screens. The apps you select
display in the carousel on the Home screen. My Apps
Your app selections do not affect search results. TiVo
OS shows results from all apps to help you find what
you want to watch. When an app you’re not using has
the title, you can then decide to sign up for it.
2. Navigation Carousel
The navigation carousel on the Home screen gives you
easy access to common features: Live TV, Guide, All
Apps Freely Sources Recordings, , , Channel List,
(depends on the model), , and .Timers Settings
3. Browse Screens
Selecting , , Free TV Shows Movies, and Watchlist
in the Main Menu to focus your browsing on those
content types.
4. Content Details
When you find content that interests you, highlight it
and press on your remote control to view details OK
about it. You can also learn about cast and crew, and
see recommendations for similar content.
4.1. Watch Now
Choose to watch the show from any of your selected
applications that have the show available. These are
the applications you enabled for recommendations on
the Manage Apps screen. Others that have the content
display in the More Ways to Watch.
4.2. Watchlist
Use the Watchlist to save shows you want to start or
continue watching later and favourites to return to.
What you add helps personalise recommendations
for you.
The titles you add also appear in a Watchlist carousel
on the Home screen.
To add a show, select + Watchlist on its Content
Details screen. The plus changes to a bookmark.
To remove a show, go to its Content Details screen and
select Watchlist. The bookmark changes to a plus.
4.3. Rate
Tell TiVo OS how you feel about a TV show or movie
with a Thumbs Up or Thumbs Down. In return you’ll
get recommendations that better reflect what you enjoy
watching. Go to the Content Details screen of a show
and select . Choose Thumbs Up or Thumbs Down. Rate
Content that you rate Thumbs Down will no longer
appear in recommendations.
4.4. Report Content
Go to the Content Details screen of a show and
select flag. Report content screen will be displayed.
After selecting the pre-defined reasons that suit you,
highlight Report OK and press . You can also select the
Something else option and enter your reason using
the virtual keyboard in case the pre-defined reasons
do not suit you.
4.5. Browse All Episodes
Select Episodes on the Content Details screen for an
episodic TV show series to see its episodes ordered
by Season.
5. Text Search
Select Search in the Main Menu to search for movies
and TV shows across all your applications. Press OK
and enter a title or actor using the virtual keyboard.
Then highlight and press to start the search. Done OK
Results display on the screen. Highlight the desired
result using the directional buttons and press to OK
open.
English - 9 -
6. Voice Search and Control
Use your voice to search for TV shows and movies.
It’s faster and more accurate than typing on a remote
control. You can also navigate screens and control
volume by speaking naturally. Press the Voice button
on your remote control (depends on the model of the
remote control and the remote control should be paired
with the TV before use; refer to the Remote Control
section for more information), then ask for content
by criteria like title, genre, actor, director, rating, age
appropriateness, quote, or decade. You can continue
to talk to refine search results after they display: “Show
me Tom Cruise movies. Just the ones from the 90s.”
Note: Voice search and voice control may not be available
in some countries.
7. Need Help?
Get answers to common questions and learn to
experience the most from TiVo OS at: https://www.
tivo.com/support
Inserting the Batteries into the Remote
The remote may have a screw that secures the battery
compartment cover onto the remote control (or this may
be in a separate bag). Remove the screw, if the cover
is screwed on previously. Then remove the battery
compartment cover to reveal the battery compartment.
Insert two 1.5V - size batteries. Make sure the (+) AAA
and (-) signs match (observing correct polarity). Do not
mix old and new batteries. Replace only with same or
equivalent type. Place the cover back on. Secure the
cover again with the screw, if any.
A message will be displayed on the screen when the
batteries are low and must be replaced. Note that when
the batteries are low, the performance of the remote
control may be impaired.
Batteries should not be exposed to excessive heat
such as sunshine, fire or the like.
Power Connection
IMPORTANT: The TV set is designed to operate on a
220-240V AC, 50 Hz supply. After unpacking, allow the
TV set to reach the ambient room temperature before
you connect the set to the mains.
Plug one end (the two-hole plug) of the supplied
detachable power cord into the power cord inlet on
the rear side of the TV as shown above. Then plug
the other end of the power cord into the mains socket
outlet.
Note: The position of the power cord inlet may differ depending
on the model.
Antenna Connection
Connect the aerial or cable TV plug to the aerial input
(ANT) socket or satellite plug to the satellite input (LNB)
socket located on the rear-left side of the TV.
Rear-left side of the TV
1. Satellite
2. Aerial or cable
If you want to connect a device to the TV, make
sure that both the TV and the device are turned off
before making any connection. After the connection
is done, you can turn on the units and use them.
English - 10 -
Licence Notification
The terms HDMI, HDMI High-Definition Multimedia
Interface, HDMI trade dress and the HDMI Logos
are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc.
Dolby, Dolby Vision, Dolby Atmos, and the double-D
symbol are registered trademarks of Dolby Laboratories
Licensing Corporation. Manufactured under licence
from Dolby Laboratories. Confidential unpublished
works. Copyright © 2012-2022 Dolby Laboratories.
All rights reserved.
YouTube and the YouTube logo are trademarks of
Google Inc.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by Vestel Elektronik Sanayi ve
Ticaret A.S. is under licence. Other trademarks and
trade names are those of their respective owners.
This product contains technology subject to certain
intellectual property rights of Microsoft. Use or
distribution of this technology outside of this product
is prohibited without the appropriate licence(s) from
Microsoft.
Content owners use Microsoft PlayReady™ content
access technology to protect their intellectual property,
including copyrighted content. This device uses
PlayReady technology to access PlayReady-protected
content and/or WMDRM-protected content. If the
device fails to properly enforce restrictions on content
usage, content owners may require Microsoft to revoke
the device’s ability to consume PlayReady-protected
content. Revocation should not affect unprotected
content or content protected by other content access
technologies. Content owners may require you to
upgrade PlayReady to access their content. If you
decline an upgrade, you will not be able to access
content that requires the upgrade.
The “CI Plus” Logo is a trademark of CI Plus LLP.
This product is protected by certain intellectual property
rights of Microsoft Corporation. Use or distribution of
such technology outside of this product is prohibited
without a licence from Microsoft or an authorised
Microsoft subsidiary.
Disposal of Old Equipment and Batteries
Only for European Union and
countries with recycling systems
These symbols on the products,
packaging, and/or accompanying
documents mean that used electrical
and electronic products and batteries
must not be mixed with general
household waste.
For proper treatment, recovery and
recycling of old products and batteries,
please take them to applicable collection
points in accordance with your national
legislation.
By disposing of them correctly, you will
help to save valuable resouces and
preventany potentialnegative eects
on human health and the environment.
For more information about collection
and recycling, please contact your local
municipality.
Penalties may be applicable for
incorrect disposal of this waste, in
accordance with national legislation.
Note for the battery symbol (bottom
symbol):
Thi s s y mbo l mi ght be us ed in
combination with a chemical symbol.
In this case it complies with the
requirement set by the Directive for the
chemical involved.
Declaration of Conformity (DoC)
Hereby, Panasonic Marketing Europe GmbH, declares
that this TV is in compliance with the essential requi -
rements and other relevant provisions of the Directive
2014/53/EU.
If you want to get a copy of the original DoC of this TV,
please visit the following website:
http://www.ptc.panasonic.eu/compliance-documents
Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Web Site: http://www.panasonic.com
English - 11 -
UK Declaration of Conformity (DoC)
Hereby, Panasonic Marketing Europe GmbH declares
that this product is in compliance with the essential re -
quirements and other relevant provisions of the Radio
Equipment Regulations 2017 No. 1206.
If you want to get a copy of the original DoC of this
product, please visit the following website:
http://www.ptc.panasonic.eu/compliance-documents
Panasonic Marketing Europe GmbH, Wiesbaden,
Germany
Importer for UK:
Panasonic UK, a branch of Panasonic Marketing
Europe GmbH
Maxis 2, Western Road, Bracknell, Berkshire, RG12
1RT
Sales and Support Information
Customer Communication Centre
• For customers within the UK: 0344 844 3899
• For customers within Ireland: 01289 8333
• Monday - Friday 9:00am - 5:00pm, (Excluding public
holidays).
• For further support on your product, please visit our
website: www.panasonic.co.uk
Direct Sales at Panasonic UK
• Order accessory and consumable items for your
product with ease and confidence by phoning our
Customer Comminications Centre Monday - Friday
9:00am - 5:00pm, (Excluding public holidays).
• Or go on line through our Internet Accessory ordering
application at www.pas-europe.com.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities
are provided directly by Panasonic UK.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping
for a wide range of finished products. Take a browse
on our website for further details.
English - 12 -
Specification
TV Broadcasting PAL BG/I/DK
SECAM BG/DK
Receiving
Channels VHF (BAND I/III) - UHF (BAND U) - HYPERBAND
Digital Reception Fullyintegrateddigitalterrestrial-cable-satelliteTV
(DVB-T-C-S)(DVB-T2,DVB-S2compliant)
Number of Preset
Channels 11 000
Channel Indicator On Screen Display
RF Aerial Input 75 Ohm (unbalanced)
Operating Voltage 220-240V AC, 50Hz.
Audio Dolby Atmos
Headphone 3.5 mm mini stereo jack
Networked Standby
Mode Power
Consumption (W)
< 2
TB-43W60AEY TB-50W60AEY TB-55W60AEY TB-65W60AEY
Audio Output
Power (WRMS.)
(10% THD)
2 x 10 W 2 x 10 W 2 x 10 W 2 x 12 W
Power Consumption
(W) 150 W 135 W 140 W 200 W
Weight (kg) 7,5 Kg 9,5 Kg 13 Kg 22 Kg
TV Dimensions
DxLxH (with stand)
(mm)
235 x 965 x 619 235 x 1120 x 706 235 x 1233 x 770 275 x 1453 x 896
TV Dimensions
DxLxH (without
stand) (mm)
87 x 965 x 561 87 x 1120 x 648 87 x 1233 x 712 82 x 1453 x 836
Display 16/9 43” 16/9 50” 16/9 55” 16/9 65”
Operation
temperature and
operation humidity
0ºC up to 40ºC, 85% humidity max
For more product information, please visit EPREL: https://eprel.ec.europa.eu.
EPREL registration number is available on https://eprel.panasonic.eu/product.
English - 13 -
Wireless LAN Transmitter Specifications
Frequency Ranges Max Output
Power
2400 - 2483,5 MHz (CH1 - CH13) < 100 mW
5150 - 5250 MHz (CH36 - CH48) < 200 mW
5250 - 5350 MHz (CH52 - CH64) < 200 mW
5470 - 5725 MHz (CH100 - CH140) < 200 mW
Country Restrictions
The Wireless LAN equipment is intended for home
and office use in all EU countries, the UK and Northern
Ireland (and other countries following the relevant EU
and/or UK directive). The 5.15 - 5.35 GHz band is
restricted to indoor operations only in the EU countries,
in the UK and Northern Ireland (and other countries
following the relevant EU and/or UK directive). Public
use is subject to general authorisation by the respective
service provider.
Country Restriction
Russian Federation Indoor use only
The requirements for any country may change at any
time. It’s recommended that user checks with local
authorities for the current status of their national re-
gulations for 5 GHz wireless LAN’s.
both 2.4 GHz and
Standard
IEEE 802.11.a/b/g/n
Host Interface
USB 2.0
Security
WEP 64/128, WPA, WPA2, TKIP, AES, WAPI
Notice
DVB / Data broadcasting / IPTV functions
• This TV is designed to meet the standards (as of
March, 2021) of DVB-T / T2 (MPEG2, MPEG4-
AVC(H.264) and HEVC(H.265)) digital terrestrial
services, DVB-C (MPEG2, MPEG4-AVC(H.264)
and HEVC(H.265)) digital cable services and DVB-S
(MPEG2, MPEG4-AVC(H.264) and HEVC(H.265))
digital satellite services.
Consult your local dealer for availability of DVB-T /
T2 or DVB-S services in your area.
Consult your cable service provider for availability of
DVB-C services with this TV.
• This TV may not work correctly with the signal which
does not meet the standards of DVB-T / T2, DVB-C
or DVB-S.
• Not all the features are available depending on the
country, area, broadcaster, service provider, satellite
and network environment.
• Not all CI modules work properly with this TV. Consult
your service provider about the available CI module.
• This TV may not work correctly with CI module that
is not approved by the service provider.
• Additional fees may be charged depending on the
service provider.
• The compatibility with future services is not
guaranteed.
• Internet apps are provided by their respective service
providers, and may be changed, interrupted, or
discontinued at any time.
Panasonic assumes no responsibility and makes no
warranty for the availability or the continuity of the
services.
• Panasonic does not guarantee operation and
performance of peripheral devices made by other
manufacturers; and we disclaim any liability or
damage arising from operation and/or performance
fromusageofsuchothermaker'speripheraldevices.
English - 14 -
Remote Control
1. Standby (*): Standby / On (press briefly)
Restart / Power Off (press and
hold)
2. Numeric buttons: Switches the channel in Live
TV mode, enters a number in the text box on the
screen
3. Source: Shows available broadcast and content
sources, is also used in pairing process of the
remote
4. Volume +/-: Increases/decreases the volume level
5. Guide: Displays the electronic programme guide
for digital TV channels. The current channel (if
on the TV source) or the last channel watched (if
on the Home screen) should be a digital channel
6. OK: Confirms user selections, enters sub-menus,
holds the page (in Live TV-Teletext mode), views
channel list (in Live TV mode)
7. Back/Return: Returns to previous menu screen,
goes one step back, closes open windows, opens
index page (in Live TV-Teletext mode). Quickly
cycles between previous and current channels
or sources
8. Netflix: Launches the Netflix application
9. Freely: Launches the Freely platform (UK only)
10. TikTok: Launches the Tiktok application
11. Coloured Buttons: Follow the on-screen instruc-
tions for coloured button functions
12. Rewind: Moves frames backwards in media such
as movies
13. Stop: Stops the media being played
14. No function
15. Pause: Pauses the media being played
Play: Starts to play selected media
16. Text: Displays teletext (where available). Press the
button a second time to superimpose the teletext
over a normal broadcast picture (mix). Press
again to close
17. Fast Forward: Moves frames forward in media
such as movies
18. Free: Displays free content from various applica-
tions on the Home screen
19. Disney+: Launches the Disney+ application
20. YouTube: Launches the YouTube application
21. Exit: Closes and exits from displayed menus,
returns to previous screen, exits from any running
application or OSD banner, closes the Home
screen and switches to last source used
22. Directional buttons: Helps navigate menus,
setting options, moves the focus or cursor, etc. and
displays the subpages in Live TV-Teletext mode
when pressed Right or Left. Follow the on-screen
instructions
23. Settings: SettingsOpens the menu
24. TiVo: Returns you to Home screen within TiVo
OS from places like a movie you’re watching or
the Settings screen
25. Voice: Activates the microphone on the remote
Note: Voice search and voice control may not be available
in some countries
26. Programme +/-: Increases/decreases channel
number in Live TV mode
27. Mute: Completely turns off the volume of the TV
28. Info: Displays information about on-screen content,
shows hidden information (reveal - in Live TV-
Teletext mode)
(*) Standby Button
Press and hold the button to see additional Standby
actions for this button. Highlight one of the Restart,
Standby (Normal Standby), and (Forced Power off
Standby) options and press to perform the selected OK
action. If your TV stops responding to commands and
the actions menu can not be displayed, the TV will be
forced to restart when the button is kept pressed for
about five seconds.
Press briefly and release the button to switch the
TV into standby mode or to switch it on when it’s in
standby mode.
To pair remote with the TV
In order to pair your remote, you can go to Settings>-
Devices>Pair Remote Control or Other Device (Blue-
tooth) menu, set the Pair Remote Control or Other
Device (Bluetooth) option to Enabled, then highlight
Discover OK and press to start the device discovery.
Press and hold the button on the remote until Source
the LED on the remote starts to blink, then release the
Source button. That means the remote is in pairing
mode.
Now you will wait for the TV to find your remote. Select
the name of your remote and press OK when it appears
on the TV screen.
When the pairing process is successful, the LED on the
remote will go off. If the pairing process fails the remote
will enter sleep mode after 30 seconds.
English - 15 -
Connections
Connector Type Cables Device
HDMI
Connection
SPDIF SPDIF
(Optical Out)
Connection
HEADPHONE
Headphone
Connection
USB
Connection
CI
Connection CAM
module
LAN
Ethernet
Connection LAN / Ethernet Cable
When using the wall mounting kit
(available from a third party in
the market, if not supplied), we
recommend that you plug in all
cables before mounting the TV
on the wall. Insert or remove the
CI module only when the TV is
SWITCHED OFF. You should refer
to the module instruction manual
for details of the settings. The/
Each USB input of your TV supports
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV. When connecting equipment
using a HDMI cable to your TV,
to guarantee sufficient immunity
against parasitic frequency radiation
and trouble-free transmission of
high definition signals, such as 4K
content, you have to use a high
speed shielded (high grade) HDMI
cable with ferrites.
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
English - 16 -
Switching On/Off
To Switch the TV On
Connect the power cord to a power source such as a
wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby
• Press the button, or a Standby Programme +/-
numeric button on the remote control.
• Press the centre of the joystick on the TV in or push
it up/down.
To switch on the TV from hard standby
• Press the centre of the joystick on the TV in.
To switch the TV into standby
Press the button on the remote control, the Standby
TV will switch into standby mode.
To switch the TV into hard standby
Press the centre of the joystick on the TV in and hold it
down for more than 3 seconds, the TV will switch into
hard standby mode.
To switch off the TV
To power down the TV completely, unplug the power
cord from the mains socket.
Note: When the TV is switched into standby mode, the standby
LED can blink to indicate that features such as Standby Mode
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press . In the following steps of OK
the installation guide, set your preferences using the
directional buttons and button.OK
After the language selection, you will be asked whether
you want to change accessibility settings. Highlight
Yes and press to change. Refer to the OK System
Menu Content section for detailed information on
available options.
Set your country preference on the next screen.
Depending on the country selection you may be asked
to set and confirm a PIN at this point. You have to
enter it if you are asked to enter a PIN for any menu
operation later.
You can activate in the next step. This Store Mode
feature will configure your TV’s settings for store
environment and depending on the TV model, the
supported features of it may be displayed on the screen
as an info banner or the pre-installed video file may
be played back. This feature is intended only for store
use. It is recommended to select for home Home Mode
use. The Store Mode option will be available in the
Settings>System>More menu and your preference
for this setting can be changed later. Make your
selection and press to continue.OK
Depending on the model of your TV, the picture mode
selection screen may appear at this point. In order
for your TV to consume less energy and be more
environmentally friendly select and press Natural OK
to continue. If you select and press , a Dynamic OK
confirmation dialogue will be displayed. Select and Yes
press to proceed. You can change your selection OK
later using the option in the Mode Settings>Picture
menu.
Depending on the model of your TV and the country
selection Summary of Consent Settings screen may
appear at this point. Using the options on this screen
you can manage your consent settings. Highlight
a feature and press to enable or disable. Read OK
the related explanations displayed on the screen for
each highlighted feature before making any changes.
You can press the Right directional button to highlight
the text and use the or Up/Down Programme +/-
directional buttons to scroll up and down to read the
entire text. You will be able to change your preferences
at any time later from the Settings>Legal>Consent
Settings menu. If the option is Internet Connection
disabled the step will be Network/Internet Settings
skipped and not displayed. If you have any questions,
complaints or comments regarding the privacy policies
or their enforcement, please contact by email at
privacyrequest@xperi.com and smarttvsecurity@
vosshub.com. Highlight Submit Consent Choices
and press to continue.OK
On the next screen you need to agree to the terms and
conditions of TiVo Smart TV Service to make use of
the related services. Scroll the page to read the entire
text using the or Up/Down directional Programme +/-
buttons. Highlight and press on the remote Accept OK
to confirm and proceed. Highlight and press Cancel
OK to proceed without confirmation.
You will need to agree to the terms and conditions
of the Manufacturer next to make use of the related
services. Scroll the page to read the entire text using
the Programme +/- or Up/Down directional buttons.
Highlight Accept and press OK on the remote to
confirm and proceed. Highlight and press Cancel OK
to proceed without confirmation.
The Network/Internet Settings screen will be
displayed next. Please refer to the Connectivity
section if you need information on configuring a wired
or a wireless connection (availability depends on the
model) and other available options. If you want your
TV to consume less power in standby mode, you can
disable the option for Networked Standby Mode
the selected network type by setting it as Off. After
the settings are completed highlight and press Next
OK button to continue. If the Network Type is set to
English - 17 -
Wireless Device, available networks will be listed.
Highlight Next again when you are done and press
OK to continue.
Depending on the model of your TV and supplied
remote controls, an automatic pairing screen may
be displayed at this point. Follow the on-screen
instructions to pair your wireless remote control
(depends on the model of the remote control) with
your TV. Refer to the section for more Remote Control
information. If you want to pair your remote control
at a later time, highlight and press .Setup Later OK
On the next screen the menu will be Add Devices
displayed. You can connect external wireless audio
devices, remotes, keyboards, and mice to your TV.
For audio devices use the Pair Audio Link Device
(Bluetooth) option, for wireless remotes, keyboards,
and mice use the Pair Remote Control or Other
Device (Bluetooth) option. Highlight the option you
prefer, press and wait for the TV to complete device OK
discovery. If you select Pair Remote Control or Other
Device (Bluetooth) option, instructions to pair your
remote will be displayed first. Highlight and Discover
press OK when you are ready. Available devices will
be listed. Highlight your device from the list and press
OK Connect. Highlight from the options menu and
press OK to complete the pairing process. You can
use the option on the bottom side to repeat Discover
device discovery. Highlight and press to Continue OK
proceed. You can also use the related options in the
Settings>Devices menu to add/remove devices later.
Refer to the Connectivitysectionformoreinformation
onconnectingwirelessdevices.Tocontinuehighlight
Next OK and press .
On the next screen you need to agree to the
manufacturer’s terms and conditions for Freely to
make use of the related services. Scroll the page to
read the entire text using the or Up/
Programme +/-
Down directional buttons. Highlight and press Yes OK
on the remote to confirm and proceed. Highlight No
and press to proceed without confirmation. For OK
further requirements for Freely services refer to the
Freely Platform section.
On next screen you can set broadcast types to be
searched, set your encrypted channel searching
and time zone (depending on the country selection)
preferences. Additionally you can set a broadcast
type as your favourite one. Priority will be given to the
selected broadcast type during the search process
and the channels of it will be listed on the top of the
channel list. When finished, highlight and press Next
OK to continue.
About Selecting Broadcast Type
To turn a search option on for a broadcast type highlight
it and press the , Left or Right directional button. To OK
turn the search option off press the , Left or Right OK
directional button after moving the focus on the desired
broadcast type option.
Digital Aerial: D. Aerial If the broadcast search option
is turned on, the TV will search for digital terrestrial
broadcasts after other initial settings are completed.
Digital Cable: D. Cable If the broadcast search
option is turned on, the TV will search for digital cable
broadcasts after other initial settings are completed. A
dialogue may be displayed depending on the country
selection before starting to search asking whether you
want to perform cable network search. If you select Yes
and press you can select or set values OK Network
such as and Frequency, Network ID,Search Step
on the next screen. If you select and press No OK or
the network search dialogue is not displayed you can
,
set , and Start Frequency Stop Frequency, Search
Step on the next screen. When finished, highlight Next
and press to continue.OK
Note: Searching duration will change depending on the
selected .Search Step
Satellite: If the broadcast search option Satellite
is turned on, the TV will search for digital satellite
broadcasts after other initial settings are completed.
Before satellite search is performed some settings
should be made.
Depending on the model and the selected country
the next step may be the selection of the installation
type for satellite. You can select to start an operator
installation or a standard installation at this point. If
you want to perform an operator installation set the
,
Install Type as Operator and then set the Satellite
Operator according to your operator preference.
Some of the following steps may differ or be skipped
depending on the selected operator in this step. If you
set the Install Type as Standard, you can continue
with regular satellite installation and watch satellite
channels. Press OK to proceed.
Antenna type selection screen may be displayed
next. You can select as Antenna type Direct Single ,
Satellite Cable DiSEqC switch or by using the Left or
Right directional buttons. After selecting your antenna
type press . On the next screen press to see OK OK
the options to proceed. Continue, Transponder list
and Configure LNB options may be available. You
can change the transponder and LNB settings using
the related menu options.
• Direct: If you have a single receiver and a direct
satellite dish, select this antenna type. Press to OK
continue. Select an available satellite on the next
screen and press , highlight and press OK Continue
OK again to scan for services.
• Single Satellite Cable: If you have multiple recei -
vers and a single satellite cable system, select this
antenna type. Press to continue. Configure OK
settings by following instructions on the next screen.
English - 18 -
Press OK, highlight Continue and press OK again
to scan for services.
• DiSEqC switch: If you have multiple satellite dishes
and a DiSEqC switch, select this antenna type. Then
set the DiSEqC version and press to continue. OK
You can set up to four satellites (if available) for
version v1.0 and sixteen satellites for version v1.1
on the next screen. Press , highlight OK Continue
and press again to scan the selected satellite/s.OK
Note: Depending on the model of your TV, DiSEqC version
v1.1 may not be supported and therefore the DiSEqC version
selection step may not be available.
Analogue: If the Analogue broadcast search option is
turned on, the TV will search for analogue broadcasts
after other initial settings are completed.
Internet (IP) Services: Internet (IP) Services If the
search option is turned on, the TV will search for
available Internet services after other initial settings
are completed.
After the initial settings are completed the TV will start
to search for available broadcasts of the selected
broadcast types.
While the search continues current scan results will be
displayed at the bottom of the screen. You can press
the , TiVo Back or Exit button to cancel the search.
The channels that have already been found will be
stored in the channel list.
Postcode Selection screen will be displayed next.
Enter your postcode to receive your regional channels.
Freely TV-App installation screen will be displayed
at this point. In order to access Freely services, this
application needs to be installed. When you install the
application, the elements of the user interface such as
channel info banner and electronic programme guide,
which are normally provided by the TV, will be replaced
by this application. If you want to install the application
at a later time, go to the navigation carousel on the
Home screen and select or press the Freely Freely
button on the remote control. You will have to agree
to the terms and conditions for Freely services first if
you did not agree them during the first time installation.
Highlight Yes and press OK to confirm and proceed.
Then a dialogue will be displayed asking whether you
want to install Freely TV-App. Highlight and press Yes
OK to continue with the installation. You will be directed
to a screen where you can carry out the installation.
After the first time installation is completed, Home
screen will be displayed. You can press the Exit
button to watch TV channels. You can press the OK
button to display the channel list when watching TV
channels an he channel list according to
d customise t
your preferences using the Edit and Filter tab options.
While the search continues a dialogue may appear,
asking whether you want to sort channels according
to the LCN . Select and press to confirm.(*) Yes OK
(*) LCN is the Logical Channel Number system that organises
available broadcasts in accordance with a recognisable
channel number sequence (if available).
Note: Do not turn off the TV while performing first time
installation. Note that, some options may not be available
depending on the country selection.
Media Playback via USB Input
You can connect 2.5” and 3.5” inch (HDD with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB input(s) of the TV.
IMPORTANT! Back up the files on your storage devices
before connecting them to the TV. Manufacturer will
not be responsible for any file damage or data loss.
Certain types of USB devices (e.g. MP3 Players)
or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports FAT32 and
NTFS disk formatting.
Wait a little while before each plugging and unplugging
as the player may still be reading files. Failure to do
so may cause physical damage to the USB player
and the USB device itself. Do not pull out your drive
while playing a file.
You can use USB hubs with your TV’s USB input(s).
External power supplied USB hubs are recommended
in such a case.
It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard disk.
Note: When viewing media files the menu Media Browser
can only display a maximum of 1000 media files per folder.
Media Browser
You can play back music and movie files and display
photo files stored on a USB storage device by
connecting it to your TV. Connect a USB storage device
to one of the USB inputs located on the side of the TV.
After connecting a USB storage device to your TV a
message stating that the USB device is connected will
be displayed on the screen. You can access the content
of the connected USB device from the Sources menu
on the Home screen. You can also press the Source
button on the remote and then select your USB storage
device from the list of sources.
You can set your media browser preferences by using
the Settings menu. Settings menu can be accessed
via the information bar which is displayed on the
bottom of the screen while playing back a video or
an audio file or displaying a picture file. Press the
Info button if the information bar has disappeared,
highlight the gear wheel symbol positioned on the
right side of the information bar and press OK. Picture
Settings, Sound Settings, Media Browser Settings
English - 19 -
and Options menus may be available depending on
the media file type and the model of your TV and its
features. The content of these menus may also differ
according to the type of the currently open media file.
Only the menu will be available while Sound Settings
playing back audio files.
Loop/Shuffle Mode Operation
Start playback and activate
All files in the list will be
continuously played in
original order
Start playback and activate
The same file will be
played continuously
(repeat)
Start playback and activate
All files in the list will be
played once in random
order
Start playback and activate ,
All files in the list will be
continuously played in
the same random order
To use the functions on the information bar highlight the
symbol of the function and press . To change the OK
status of a function highlight the symbol of the function
and press as much as needed. If the symbol is OK
marked with a red cross, that means it is deactivated.
Custom Boot Up Logo
You can personalise your TV and see your favourite
image or photo on the screen each time your TV boots
up. To do this, copy your favourite image files onto a
USB disk and open them in the Media Browser. Select
USB input from the menu on the Home Sources
screen and press . You can also press the OK Source
button on the remote and then select your USB storage
device from the list of sources. When you have chosen
the desired image, highlight it and press to view OK
it in full screen. Press the button, highlight the Info
gear wheel symbol on the information bar and press
OK Options OK. Select and press to enter. Set Boot
Logo option will be available. Highlight it and press
OK again to choose the image as custom boot logo.
A confirmation message will be displayed. Select Yes
and press again. If the image is suitable you OK (*)
will see it on the screen during the TV’s next boot up.
Note: You can use the option in Restore Default Boot Logo
the Settings>System>More menu to restore the default boot
logo. If you perform the boot logo will First Time Installation
also be restored to its default.
(*) Images must have an aspect ratio between 4:3 to 16:9
and they must be in .jpeg or .jpg file formats. The image
cannot be set as boot logo, if its resolution doesn’t appear
on the info banner.
FollowMe TV
With your mobile device you can stream the current
broadcast from your smart TV using the FollowMe
TV feature. Install the appropriate Smart Center
application to your mobile device. Start the application.
For further information on using this feature refer to
the instructions of the application you use.
Note: Depending on model, your TV may not support this
function. The application may not be compatible with all mobile
devices. Both of the devices must be connected to the same
network. This feature is only functional on TV source.
CEC
This function allows the user to control the CEC-
enabled devices, that are connected through HDMI
ports by using the remote control of the TV.
The CEC option in the menu should Settings>Devices
be set as at first. Press the button Enabled Source
and select the HDMI input of the connected CEC
device from the menu. When a new Sources List
CEC source device is connected, it will be listed in
Sources List menu with its own name instead of the
connected HDMI port’s name (such as DVD Player,
Recorder 1, etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected. To terminate this operation and control
the TV via the remote again, press and hold the “0-
Zero” button on the remote control for 3 seconds.
You can disable the CEC functionality by setting the
related option under the menu Settings>Devices
accordingly.
The TV supports ARC (Audio Return Channel). This
feature is an audio link meant to replace other cables
between the TV and an audio system (A/V receiver or
speaker system).
When ARC is active, the TV will mute its other audio
outputs, except the headphone jack, automatically and
volume control buttons are directed to the connected
audio device. To activate ARC set the Sound Output
option in the menu as . Settings>Sound HDMI ARC
Note: ARC is supported only via the HDMI2 input.
Enhanced Audio Return Channel (eARC)
Similar to ARC, the eARC feature enables the transfer
of the digital audio stream from your TV to a connected
audio device via the HDMI cable. eARC is an improved
version of ARC. It has a much higher bandwidth than
its predecessor. Bandwidth represents the range of
frequencies or amount of data that is being transferred
at a time. Higher bandwidth translates into a higher
amount of data that can be transferred. Higher
bandwidth also means that digital audio signal doesn’t
have to be compressed and is much more detailed,
rich, and vibrant.
English - 20 -
When eARC is enabled from the sound menu, TV
first tries to establish eARC link. If eARC is supported
by the connected device, the output turns into eARC
mode and the “eARC” indicator can be observed on
the connected device’s OSD. If an eARC link cannot
be established (for example, the connected device
is not supporting eARC but supporting ARC only) or
if eARC is disabled from the sound menu, then TV
initiates ARC.
For eARC to function properly;
• The connected audio device should also support eARC.
• Some HDMI cables do not have enough bandwidth to
carry high-bit-rate audio channels, use an HDMI cable
with eARC support (HDMI High Speed Cables with
Ethernet and the new Ultra High Speed HDMI Cable
- check hdmi.org for latest info).
• Set the option in the Sound Output Settings>Sound
menu to option in the HDMI ARC. The eARC Sound
menu will be enabled. Check to see if it is set to On.
If not, set it to .On
Note: eARC is supported only via the HDMI2 input.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with
the TV. The volume can be controlled using the re -
mote control of the TV. To activate this feature set the
Sound Output Settings>Soundoption in the menu
as . When HDMI ARC HDMI ARC option is selected,
CEC Enabled option will be set as automatically, if it
is not already set. The TV speakers will be muted and
the sound of the watched source will be provided from
the connected sound system.
Note: The audio device should support System Audio Control
feature.
Game Mode
You can set your TV to achieve lowest latency for
games. Go to menu and set the Settings>Picture
Mode Game Game option to . option will be available
when the TV’s input source is set to HDMI. When set
the picture will be optimised for low latency.
Auto Low Latency Mode
You can also enable the (Auto Low Latency ALLM
Mode) option in the menu. If this Settings>Devices
function is enabled the TV automatically switches the
picture mode to when ALLM mode signal is Game
received from the current HDMI source. TV switches
back to previous picture mode setting when the ALLM
signal is lost. So you won’t need to change the settings
manually.
If the option is enabled, picture mode can not ALLM
be changed as long as ALLM signal is received from
the current HDMI source.
In order for the ALLM feature to be functional the related
HDMI source setting should be set to Enhanced. You can
change this setting from the Settings>System>Sources
menu.
E-Manual
You can find instructions for your TV’s features in the
E-Manual.
To access the E-Manual, enter the Settings>Sys -
tem>More Manuals OK menu, select and press . For
quick access press the button and then the Settings
Info button.
By using the directional buttons select a desired
topic and press to read instructions. To close the OK
E-Manual screen press the Back/Return, Exit or
TiVo button.
Note: Depending on model, your TV may not support this
function. The content of the E-Manual may vary according
to the model.
English - 21 -
Settings Menu Content
Devices Menu Content
Pair Audio Link
Device (Bluetooth)
Press OK to open the pairing screen. Using this screen you can discover and connect
the Bluetooth wireless technology enabled sound devices to your TV. Refer to the
Connecting Bluetooth Devices section for further information.
Pair Remote Control
or Other Device
(Bluetooth)
Press OK to open the pairing screen. Using this screen you can discover and the connect
Bluetooth wireless technology enabled remotes, keyboards and mice to your TV. Refer
to section for further information.
the Connecting Bluetooth Devices
Note: Your TV may not be compatible with all keyboard and mouse models in the market. For more information
contact your local dealer or retail outlet where you bought your TV.
Virtual Remote Enable or disable the virtual remote feature.
Audio Video Sharing
This feature allows you to share files stored on your smartphone or tablet pc. If you have
a compatible smartphone or tablet pc and the appropriate software is installed, you can
share/play photos, music and videos on your TV. See instructions of your sharing software
for more information.
ALLM
Game
current HDMI source. Refer to the Game Mode
Timer of No Signal
If your TV does not receive any input signal (e.g. from an aerial or HDMI source) for
3 minutes, it will go into standby mode. You can enable or disable this functionality by
setting this option accordingly.
CEC With this setting you can enable and disable CEC functionality completely. Press the
Left or Right button to enable or disable the feature.
CEC Auto Power On
This function allows the connected HDMI-CEC compatible device to turn on the TV
and switch to its input source automatically. Press the Left or Right button to enable
or disable the feature.
Picture Menu Content
Mode
You can change the picture mode to suit your preference or requirements. Picture mode
can be set to one of these options: , , , and .Cinema Game Sports Dynamic Natural
Note: Available options may differ depending on the input source.
Dolby Vision Modes: Dolby Vision DarkIf Dolby Vision content is detected and
Dolby Vision Bright picture mode options will be available instead of Cinema and
Natural modes.
Contrast Adjusts the light and dark values on the screen.
Brightness Adjusts the brightness values on the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colours.
Energy Saving
For setting the to Energy Saving Custom Minimum Medium Maximum Auto, , , , ,
Screen Off Off or .
Note: ModeAvailable options may differ depending on the selected .
Backlight
This setting controls the backlight level. This option (will be located under the Energy
Savinglable if the is set to . Highlight and Energy Saving Custom
use the Left/Right directional buttons to set.
Picture Zoom Sets the desired image size format.
Picture Shift
This option (will be located under the setting) may be available depending Picture Zoom
on the setting. Highlight and press , then use directional buttons to Picture Zoom OK
shift the picture upwards or downwards.
English - 22 -
Pixellence Demo
Pixellence function optimises the TV’s video settings and helps to acquire a better
image quality. Press OK to activate Pixellence demo mode to experience Pixellence
quality. Press button again to cancel If the option is set to thisOK . Mode Game option
will not be available.
Note: This option may not be available depending on the TV model and its features.
Advanced Settings
Dynamic
Contrast
You can change the dynamic contrast ratio to desired value.
Colour Temp Sets the desired colour temperature value. Cool Normal, , Warm Custom and options
are available.
White Point
If the Colour Temp option is set as Custom, this setting will be available (will be located
under the Colour Temp setting). Increase the ‘warmth’ or ‘coolness’ of the picture by
pressing Left or Right buttons.
Vivid Blue White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as to enable.On
Vivid Dimming Low Medium High Off Vivid, , and options are available. While Dimming is active, it
will enhance contrast locally for each defined zone.
Noise Reduction Low, Medium High Off, and options are available. If the signal is weak and the picture
is noisy, use the setting to reduce the amount of noise.Noise Reduction
MEMC
Press left/right buttons to set to or . While is MEMC Low Medium High, , Off MEMC
active, it will optimise the TV’s video settings for motional images to acquire a better
quality and readability.
MEMC Demo
When MEMC option is set to Low, Medium High or , this option will be available. Press
OK button to activate the demo mode. While demo mode is active, the screen will be
divided into two sections, one displaying the MEMC activity, the other displaying the
normal settings for TV screen. Press button again to cancel.OK
Film Mode
Films are recorded at a different number of frames per second to normal television
programmes. Set to when you are watching films to see the fast motion scenes Auto
clearly.
Skin Tone Skin tone can be changed between -5 and 5.
Colour Shift
Adjust the desired colour tone.
Colour Tuner Opens colour tuner settings. Set the Colour Tuner as Enabled to adjust the Hue,
Colour Brightness and values manually.
Gamut Mapping
You can use this option to set the range of colours displayed on your TV screen. When
set as , colours are set according to the source signal. When set as On Off, the TV’s
maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
Gamma
You can use this option to set your gamma preference. Press the Left/Right directional
buttons to set to , or . Normal Bright Dark
Note: This option may not be available depending on the TV model and its features and you may not be able
to change this setting depending on the current content.
HDMI Full Range While watching from a HDMI source, this feature will be visible. You can use this feature
to enhance blackness in the picture.
11 Point White
Balance
Correction
White balance feature calibrates TV’s colour temperature in detailed grey levels. By
visually or measurement, grey scale uniformity can be improved. Adjust the strength
of the colours and value manually. Highlight this option, press Red Green Blue, , Gain
OK, and then set the desired white balance correction option (11 point or 2 point) to
Enabled to turn it on.
Reset Resets the current picture mode settings to factory default settings.
English - 23 -
Sound Menu Content
Dolby Atmos
Your TV supports Dolby Atmos technology. By means of this technology the sound moves
aroundyouinthree-dimensionalspace,soyoufeellikeyou'reinsidetheaction.Youwill
have best experience if input audio bitstream is Atmos. and options will be Auto On, Off
available. If set as , the TV will switch between and modes automatically Auto On Off
depending on the input audio bitstream information, if the input audio bitstream is Atmos
this feature will work as if it is set as . Set as to disable.On Off
Mode Smart Movie Music News Off Off, , , , and options will be available. Set as to disable.
Note: Sound Some items in the menu will be greyed out and unavailable if set to an option other than Off.
Surround Sound Enables or disables the surround sound mode.
Sound Output
Sets the sound output preference. TV S/PDIF, , HDMI ARC, Headphone Only and
Lineout options will be available. There will be no sound output except through the
selected option and the headphone jack. Note that, if this option is set as Headphone
Only, TV speakers will be muted when headphone set is plugged in.
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as . If you have connected headphones to the TV, set this Lineout
option as Please ensure before using headphones that this menu Headphone Only.
item is set to . If it is set to , the output from the headphone Headphone Only Lineout
socket will be set to maximum which could damage your hearing.
If option is selected, feature will be enabled.
the HDMI ARC CEC
Note: Sound Depending on the selected option some items in the menu will appear as out and will greyed
be unavailable.
eARC
When the option is set to , the menu option will be Sound Output HDMI ARC eARC
available. Otherwise, it will be greyed out. This option will be set to by default. On
Set
to to disable. Refer to the section for more information.Off CEC
AVL (Automatic
Volume Limiting)
Sets the sound to obtain fixed output level between programmes.
If the menu item is set to an option other than the Mode Off AVL
setting options will
change. Auto, Night, Normal Off and options will be available. In mode the TV will Auto
switch to or mode automatically according to the current time information. Normal Night
If no time information is available this option will always function as . When the TV Normal
switches to mode for the first time after setting this option as , an information Night Auto
bar will pop up on the screen.
Please note that compared to mode Normal Night
mode provides more aggressive
dynamic compression control which is suitable for silent environments.
Advanced Settings
Equalizer
Selects the equalizer mode. Custom settings can be made only when in mode.User
Dynamic Bass Enables or disables the Dynamic Bass.
Sound Mode You can select a sound mod f th suppor
e i e channel you are watching ts it. This option
will not be available if no channels are installed.
Digital Out
Sets digital out audio type. , , and options will be available.PCM Auto Passthrough
PCM: This option provides two-channel uncompressed digital audio output. You can
use this option if you experience compatibility problems such as not hearing sound.
Auto: This option provides multi-channel digital audio output (up to 5.1 channel).
Passthrough: This option provides original audio output as such in HDMI ARC. It is
recommended to use this option if you have an A/V receiver with eARC support. If your
A/V receiver does not support source audio format you may experience compatibility
problems such as not hearing sound.
Headphone
Sets headphone volume. This option will not be available if the Sound Output option
is set as .Lineout
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Balance Adjusts the balance level of the TV speakers and headphones together.
Reset Resets some of the sound settings to factory defaults.
English - 24 -
Network Menu Content
Network Type
Disable the network connection or change the connection type.
Scan Wireless
Networks
Start a search for wireless networks. This option will be available if the Network Type
is set as .Wireless Device
Disconnect
To disconnect from a wireless network and delete your saved wireless network profile (if
previously saved), highlight this option and press . This option will not be available OK
if you did not connect to a wireless network. Refer to section for more Connectivity
information.
Press WPS on your
wifi router
If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press . Go to your modem/router device and press the OK
WPS button on it to make the connection. This option will be available if the Network
Type Wireless Device is set as .
Internet Speed Test Start a speed test to check your connection bandwidth. The result will be displayed on
the screen when finished.
Advanced Settings
Change the IP and DNS configurations of your TV.
Networked Standby
Mode
Enable or disable this feature by setting it as or .On Off
Note: Connectivity For detailed information on the options of this menu refer to the section.
Installation Menu Content
Automatic Channel
Scan (Retune)
Displays automatic tuning options. Searches and stores aerial DVB stations. D. Aerial:
D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
analogue stations. Satellite: Searches and stores satellite stations. Internet (IP)
Services only: Searches and stores Internet (IP) services. This option will not be
available if the option in the Scan Internet (IP) Services Internet (IP) Services Settings
menu is set to .Off
Manual Channel
Scan
This feature can be used for direct broadcast entry.
Network Channel
Scan
Searches for the linked channels in the broadcast system. Searches for aerial D. Aerial:
network channels. Searches for cable network channels. Searches D. Cable: Satellite:
for satellite network channels.
Analogue Fine Tune
You can use this setting for fine tuning analogue channels. This feature is not available
if no analogue channels are stored and if currently watched channel is not an analogue
channel.
Satellite Settings
Displays satellite settings. Displays available satellites. You can Satellite list: Add,
Delete Edit OK Options satellites or satellite settings on the list. Press to open the
menu. Antenna installation: You can change satellite antenna settings and/or start a
satellite scan. Press to open the menu. OK Options
Installation Settings
(optional)
Displays installation settings menu. Your TV will search for Standby Mode Search (*):
new or missing channels while in standby. Any new found broadcasts will be shown.
Channel Management (*): If this option is set as , the changes on the broadcasts Enabled
such as frequency, channel name, subtitle language, etc. will be applied automatically
while watching.
(*) Availability depends on model.
Clear Service List Use this setting to clear channels stored. This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or Finland.
Select Active
Network
This setting allows you to select only the broadcasts within the selected network to be
listed in the channel list. This feature is available only for the country option of Norway.
Signal Information You can use this menu item to monitor signal related information such as signal level/
quality, network name, etc. for available frequencies.
Internet (IP) Services
Settings
Displays Internet (IP) services settings. You can enable Scan Internet (IP) Services:
or disable the search for available Internet services by setting this option to or .On Off
Factory Reset
Deletes all stored channels and settings, resets TV to factory settings.
English - 25 -
System Menu Content
Accessibility Displays accessibility options of the TV. Some options will not be available if no channels
are installed.
High Contrast Increase the contrast of the menu options and texts to make them easier to read. White
Text Yellow Text Off, and options will be available.
Subtitle
Turns the subtitles on or off.
Hard Of Hearing
Enables any special feature sent from the broadcaster.
Audio
Description
A narration track will be played for the blind or visually impaired audience. Press OK
to see all available menu options. This feature is available only if Audio Description
the broadcaster supports it.
Note: Audio description sound feature is not available in recording or time shifting mode (availability depends
on the model of your TV and its features).
Dialogue
Enhancement
This feature provides sound postprocessing options for speech-gated dialogue
enhancement. , , Off Low Medium and High options will be available. Set according
your preference.
Note: This feature has an effect only if input audio format is AC-4 and this effect only applies to TV
loudspeaker output.
Spoken Subtitles
Default preference of spoken subtitles is selected with this setting option. To make
spoken subtitles priority higher than normal ones, this option should be set to On. This
option may not be available depending on the model of your TV.
Magnification
Enables the use of button combinations to magnify the screen. and options will On Off
be available. Set as to enable.On
Magnification support will be enabled or disabled with long-press of the numeric button
5. First top-left quadrant of the screen will be zoomed. After the magnification support
is enabled, long-press of the numeric buttons will move the zoomed area to 2 4 6 8 , , ,
up, left, right and down.
Minimap
Minimap is enabled and deactivated by default. It will be activated when Magnification
feature is enabled. With this option, you can prevent magnification feature from displaying
the minimap.
Highlight
programmes with
[S] Subtitle If this option is enabled and if any electronic programme guide event has "Subtitle"
access service, these events will be highlighted with another colour.
[SL] Sign
Language
If this option is enabled and if any electronic programme guide event has "Sign Language"
access service, these events will be highlighted with another colour.
[AD] Audio
Description
If this option is enabled and if any electronic programme guide event has "Audio
Description" access service, these events will be highlighted with another colour.
Language
You may set a different language depending on the broadcaster and the country.
Conditional Access
Controls conditional access modules when available.
Parental
Enter correct PIN to change parental settings. You can easily adjust Menu Lock,
Maturity Lock Child Lock , or Guidance in this menu. You can also set a new PIN
or change the using the related options.Default CICAM PIN
Note: Some menu options may not be available depending on the countr uring the first
y you selected d
time installation process. Default PIN could have been set to 0000 or 1234. If you have defined the PIN
(is requested depending on the country selection) during the first time installation process, use the PIN
that you have defined.
Date/Time Sets date and time.
English - 26 -
Sources
Edit the names, enable or disable selected source options. There are also Regular and
Enhanced options available for HDMI sources. These options are affecting the colour
settings of the selected HDMI source. To be able to watch 4K or HDR/HLG images from
an HDMI source related source setting should be set as if the connected
,Enhanced
device is compatible with HDMI 2.0 and subsequent versions. Set as if the Regular
connected device is HDMI 1.4 compatible. Set accordingly or disable the related HDMI
source by setting as .Disabled
Netflix
If this feature is supported by your TV, you can view your ESN(*) number and deactivate
Netflix.
(*) ESN number is an unique ID number for Netflix, created especially to identify your TV.
Note: For 4K video streaming, a minimum 25Mb/s internet connection speed is required – For an
example of the requirements for streaming 4K content you may find more information on the Netflix
website (https://help.netflix.com/en/node/13444 . When you start to stream video content via the )
internet the quality of your connection will be analysed and the full HD or 4K quality may take a
short time to be realised, or in the event of a slow connection not be possible. You should check
your internet capabilities with your internet provider if you are at all unsure.
TiVo You can view the HSN and DLID information of your TV.
Freely TV-App
You can configure the Freely TV-App settings or uninstall the application. If you have not
previously installed the Freely TV-App, only the option will be available. Highlight Install
this option and press to start the installation.OK
More
Displays other setting options of the TV.
Menu Timeout
Changes timeout duration for menu screens.
Home Screen
Saver
Set the screensaver options for Home screen. You can set a wait time for the screensaver
or disable it by using the available options.
Standby Mode
LED
If set as the standby mode LED will not light up when the TV is in standby mode.Off
Device
Identification
When this option is enabled it causes a ‘Device ID’ to be generated internally for each
Web origin visited. When disabled all the current ‘Device ID’s’ are cleared for each Web
origin that was visited. You can enable or disable this feature by setting it as or On Off.
Software
Upgrade
Ensures that your TV has the latest software. Press to see the menu options.OK
Application
Version
Displays current software version.
Subtitle Mode
This option is used to select which subtitle mode will be on the screen ( subtitle / DVB
Teletext DVB subtitle) if both are available. Default value is subtitle. This feature is
available if channels are installed and the country option is set as Norway during the
rsttimeinstallation.
Auto Power
Down
Sets the desired time for the TV to automatically go into standby mode when not being
operated. This option can be set from 1 to 8 hours in steps of 1 hour. You can also
disable this option by setting as .Off
Standby On
Mode
Configures your TV’s auto launch preference. and The Home Screen Last Source
options are available.
Sleep Timer Define a time after which you want your TV to enter sleep mode automatically. Set as
Off to disable.
Biss Key
Biss is a satellite signal scrambling system that is used for some broadcasts. If you
need to enter Biss key on a broadcast, you can use this setting. Highlight Biss Key
and press to enter keys on the desired broadcast. This option will appear if satellite OK
channels are installed. Availability depends on the model of your TV and its features.
Store Mode
Select this mode for store display purposes. Whilst is enabled, some items Store Mode
in the TV menu may not be available. For some models option Enabled with video
may also be available. If this option is set, the TV will switch to store mode and the
pre-installed video file will be played back.
English - 27 -
Power Up Mode This setting configures the power up mode preference. and Last State Standby Mode
options are available.
OSS Displays Open Source Software licence information.
Restore Default
Boot Logo
Restores the default boot logo. A confirmation message will be displayed. Select Yes
and press This option may not be available depending on the model of your TV OK.
and its features.
Change Friendly
Name
Using this option you can change the device name that is used to identify your TV when
connecting a device to the TV wirelessly. The default device name will be restored if the
device name is left blank or first time installation is performed.
Application
Priority
You can set your preference regarding the priority between the broadcast applications
and CICAM App MMI applications using this option. In case a CICAM is inserted into
the TV and a contention occurs between the applications the priority will be given to
the selected type of application.
Dolby
Notification
Sets the notification appearance preference for Dolby content. When set as , Dolby On
logo will be displayed on the screen when Dolby content is detected.
Manuals
Displays the E-Manual. You can find instructions for your TV’s features in the E-Manual.
Note: Some options may not be available depending on the model of your TV, its features and the selected during the first time installation process.
Legal Menu Content
Privacy Policies
Displays the privacy policy information.
Terms & Conditions
Displays the terms and conditions for TiVo Smart TV Service .and manufacturer
Consent Settings
You can use the options here to manage your consent settings. Highlight a feature
and press to enable or disable. You can read the related explanations displayed OK
on the screen for each highlighted feature before making changes. You can press
the Right directional button to highlight the text and then use the or Programme +/-
Up/Down directional buttons to scroll up and down to read the entire text.
Advertising ID
Displays the advertising ID. You can also reset it using the related option here.
Company
Information
Displays the company information.
Transparency
Disclosure Displays the transparency disclosure.
Cookies
Show All Cookies
Displaysallsavedcookies.
Delete All
Cookies
Deletesallsavedcookies.
Do Not Track You can set your preference regarding the tracking behaviour for HbbTV services
using this option.
Samba TV Privacy
Manager
Samba Interactive TV powers recommendations and other apps by gathering data
regarding consumption of specific on-screen content to enhance your viewing
experience. Using this option you can access Samba Interactive TV settings menu,
review Samba TV’s Terms of Service, Privacy and manage your advertising preferences,
etc. Internet connection will be required in order to access HTML based settings. You
can manage your preferences at any time from the Samba Interactive TV menu. This
option may not be available depending on the selected country during the First Time
Installation process, the model of your TV and its features.
English - 28 -
General TV Operation
Using the Channel List
The TV sorts all stored stations in the channel list.
You can edit this channel list or set favourites by using
the menuChannels options. While watching live TV
channels press the button to open the channel list OK
or go to the Navigation carousel on the Home screen
and select . You can filter the listed Channel List
channels or make advanced changes in the current
list using the and tab options. Highlight the Filter Edit
tab you want and press to see available options.OK
Managing the Favourite Lists
You can create four different lists of your favourite
channels. Go to the Navigation carousel on the
Home screen and select to open the Channel List
Channels Edit menu. Highlight the tab and press
OK Tag/ to see the editing options and select the
Untag channel option. Select the desired channel on
the list by pressing the button while the channel OK
is highlighted. You can make multiple choices. You
can also use the Tag/Untag all option to select all
channels on the list. Then press the Back/Return
or Right directional button to return to the Edit menu
options. Select the option Add/Remove Favourites
and press the button again. Favourite channel list OK
options will be displayed. Set the desired list option
to On. The selected channel/s will be added to the
list. In order to remove a channel or channels from a
favourite list follow the same steps and set the desired
list option to .Off
You can use the filtering function in the Channels menu
to filter the channels in the channel list permanently
according to your preferences. For instance, using the
options of the tab, you can set one of your four Filter
favourite lists to be displayed every time the channel list
is opened. The selected filtering options will be shown
on the top of the menu screen.Channels
Configuring Parental Settings
The Parental menu options can be used to prohibit
users from viewing of certain programmes, channels
and the usage of menus. These settings are located
in the menu. Settings>System>Parental
To display parental lock menu options, a PIN should be
entered. After coding the correct PIN, parental setting
options will be displayed.
Menu Lock: This setting enables or disables access
to all menus or installation menus of the TV.
Maturity Lock: If this option is set, the TV gets the
maturity information from the broadcast and if this
maturity level is disabled, prohibits access to the
broadcast.
Note: If the country option in the is First Time Installation
set as France, Italy or Austria, ’s value will be Maturity Lock
set to 18 as default.
Child Lock: If this option is set to On, the TV can only
be controlled by the remote control. In this case the
control buttons on the TV will not work.
Guidance: This setting enables or disables access to
some of the MHEG applications. Disabled applications
can be released by entering the right PIN.
Internet Lock: If this option is set to ON, the internet
using applications will be disabled. Set to OFF to
release these applications again.
Set PIN: Defines a new PIN number.
Default CICAM PIN: This option will appear as greyed
out if no CI module is inserted into the CI slot of the
TV. You can change the default PIN of the CI CAM
using this option.
Note: Default PIN could have been set to or . If you 0000 1234
have defined the PIN (is requested depending on the country
selection) during the use the PIN that First Time Installation
you have defined. In case the PIN is entered incorrectly five
times in succession, PIN entry will be blocked and it will no
longer be possible to make a new entry for 30 minutes. However,
you can unblock the PIN entry or reset the retry count to zero
by turning the TV off and on.
Some options may not be available depending on the model
and/or on the country selection in the First Time Installation.
Electronic Programme Guide
Freely TV-App Not Installed
By means of electronic programme guide function of
your TV, you can browse the event schedule of the
currently installed digital channels on your channel
list. It depends on the related broadcast whether this
feature is supported or not.
To access the programme guide, press the Guide
button on your remote. You can also use the Guide
option on the Home screen. The current channel (if on
the TV source) or the last channel watched (if on the
Home screen) should be a digital channel. Otherwise,
the guide cannot be displayed.
There are 2 different types of schedule layouts
available, Timeline Schedule and Now/Next. To
switch between these layouts highlight the tab with
the name of the alternative layout on the upper side
of the screen and press .OK
Use the directional buttons to navigate through the
programme guide. Use the button to Back/Return
use the tab options on the upper side of the screen.
Timeline Schedule
In this layout option, all events of the listed channels will
be displayed by timeline. You can use the directional
buttons to scroll through the list of the events. Highlight
an event and press to display event options menu.OK
Press the button to use available tab Back/Return
options. Highlight the tab and press to see Filter OK
the filtering options. To change the layout highlight
Now/Next OK and press . You can use the Previous
English - 29 -
Day and options to display the events of the Next Day
previous and next day.
Highlight the Extras tab and press OK to access
below options.
Highlight Genre: Highlight GenreDisplays the
menu. Select an option and press OK. The events
in the programme guide matching the selected genre
will be highlighted.
Guide Search: Displays searching options. Using
these options, you can search the programme guide
database in accordance with the selected criteria.
Matching results will be listed.
Now: Returns back to the current time on the
timeline.
Zoom: OK Highlight and press to change the time
interval on the timeline.
Now/Next Schedule
In this layout option, only the current and next events
of the listed channels will be displayed. You can use
the directional buttons to scroll through the list of the
events.
Press the button to use available tab Back/Return
options. Highlight the tab and press to see Filter OK
the filtering options. To change the layout highlight
Timeline Schedule OK and press .
Event Options
Use the directional buttons to highlight an event and
press the button to display the OK Options menu. The
following options are available.
Select Channel: Using this option, you can switch
to the selected channel in order to watch it. The
programme guide will be closed.
More Info: Display detailed information on the selected
event. Use up and down directional buttons to scroll
through the text.
Set Timer on Event / Delete Timer on Event: Select
the Set Timer on Event option and press OK. You can
set timers for future events. The event will be added to
Timers list. To cancel an already set timer, highlight that
event and press the button. Then select the OK Delete
Timer on Event option. The timer will be cancelled.
Notes: You cannot switch to any other channel while there is
an active timer on the current channel.
It is not possible to set timer for two or more individual events
at the same time interval.
Freely TV-App Installed
By means of the electronic programme guide function
of your TV, you can browse the event schedule of the
currently installed channels on your channel list. It
depends on the related broadcast whether this feature
is supported or not.
To access the programme guide, press the Guide
button on your remote. You can also use the Guide
option on the Home screen. Or you can press the
Freely button on your remote control to connect to
the Freely platform. Then highlight the tab TV Guide
on the main screen and press .OK
Use the directional buttons to navigate through the
programme guide.
Integrated Catch-Up Services
You can enjoy Freely catch-up TV services that work
directly through the electronic programme guide. Whilst
you are on a channel, use the directional buttons to
scroll back in time. You will see content from last few
days. Available catch-up content may vary by channel
and will be indicated by a play icon. Highlight the
content you want to play back and press the button.OK
Make sure that your TV is connected to your home
network in order to use the catch-up services.
For further information regarding this matter and
other requirements for Freely services refer to the
Connectivity Freely Platform and sections.
Teletext Services (where available)
Press the Text button to enter. Press again to activate
mix mode, which allows you to see the teletext page
and the TV broadcast at the same time. Press once
more to exit. If available, sections in the teletext pages
will become colour-coded and can be selected by
pressing the coloured buttons. Follow the instructions
displayed on the screen.
Digital Teletext
Press the Text button to view digital teletext information.
Operate it with the coloured buttons, directional buttons
and OK button. The operation method may differ
depending on the content of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the Text button is pressed again, the TV returns
to television broadcast.
MHEG Teletext
With digital terrestrial broadcasting (DVB-T), in addition
to pictures and sound, you can also view digital teletext.
Digital teletext is sometimes broadcast at the same
time with the normal broadcasting.
• Press the Text Red or button
• The digital teletext information appears
• Operate it with the coloured buttons, directional
buttons and buttonOK
The operation method may differ depending on the
contents of the digital teletext. Follow the instructions
displayed on digital teletext screen. Press the Text
button to return to television broadcast.
English - 30 -
BBC Red Button+ (RB+)
While watching BBC channels, press the button or Red
Text button to access services provided Red Button+
by the BBC. On the opening page you can access
BBC’s main services such as BBC iPlayer, BBC News,
BBC Sport and many others. There are also links to
the home pages of the related applications available.
Use the navigation buttons on the TV’s remote control
to move through the application. Press the button Exit
to close and exit.
Software Upgrade
Your TV is capable of finding and updating the software
automatically via the broadcast signal or via Internet.
Software upgrade search via user interface
Press the button on the remote or selectSettings
Settings on the Home screen. Highlight the Software
Upgrade option in the menu and press System>More
OK. Then highlight the option and Scan for upgrade
press OK to check for a new software upgrade. You
can select the satellite which is used for updating
process and configure its parameters by using the
Edit Upgrade for Satellite menu options.
If a new upgrade is found, it starts to download the
upgrade. After the download is completed, a warning
will be displayed, press to complete software OK
upgrade process and restart TV.
3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00 o’clock
if the option is set to Automatic scanning Enabled
and the TV is connected to an aerial signal or to the
Internet. If a new software is found and downloaded
successfully, it will be installed at the next power on.
Note: Do not unplug the power cord while led is blinking during
the reboot process. If the TV fails to come on after the upgrade,
unplug, wait for two minutes then plug it back in.
All updates are automatically controlled. If a manual search
is carried out and no software is found then this is the current
version.
Troubleshooting & Tips
TV will not turn on
Make sure the power cord is plugged in securely to a
wall outlet. Press the button on the remote.Standby
Poor picture
• Check if you have correctly tuned the TV.
• Low signal level can cause picture distortion. Please
check antenna connections.
• Check if you have entered the correct channel
frequency if you have performed manual tuning.
No picture
• TV is not receiving any signal. Make sure the correct
source has been selected.
• Is the antenna connected properly?
• Is the antenna cable damaged?
• Are suitable plugs used to connect the antenna?
• If the content is received through an HDMI input, try
changing the related HDMI source input setting to
Enhanced Regular Sourcesor from the option in
the menu.Settings>System
• If you are in doubt, consult your dealer.
No sound
• Check if the TV sound is muted. Press the Mute
button or increase the volume to check.
• Sound is coming from only one speaker. Check the
balance setting from the menu.Sound
• Check if the option is set correctly Sound Output
from the menu.Sound
• If the content is received through an HDMI input, try
changing the related HDMI source input setting to
Enhanced Regular Sourcesor from the option in
the menu.Settings>System
Remote control - no operation
• The batteries may be exhausted. Replace the
batteries.
• The batteries maybe inserted incorrectly. Refer to the
Inserting the Batteries into the Remote section.
No signal on an input source
• It is possible that no device is connected.
• Check the AV cables and connections from your
device.
• Check the device is switched on.
Termékspecifikációk
| Márka: | Panasonic |
| Kategória: | televízió |
| Modell: | TB-65W60AEY |
Szüksége van segítségre?
Ha segítségre van szüksége Panasonic TB-65W60AEY, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók televízió Panasonic
12 Január 2025
12 Január 2025
7 Január 2025
7 Január 2025
7 Január 2025
5 Január 2025
26 December 2024
26 December 2024
26 December 2024
25 December 2024
Útmutatók televízió
- televízió Samsung
- televízió Sony
- televízió Beko
- televízió Fujitsu
- televízió Acer
- televízió Nedis
- televízió LG
- televízió Grundig
- televízió Marantz
- televízió Philips
- televízió Pioneer
- televízió SilverCrest
- televízió JVC
- televízió AEG
- televízió Sharp
- televízió Nokia
- televízió Lenovo
- televízió Casio
- televízió Toshiba
- televízió Oppo
- televízió Hyundai
- televízió Hisense
- televízió BenQ
- televízió SunBriteTV
- televízió Siemens
- televízió Medion
- televízió TCL
- televízió Xiaomi
- televízió GoGen
- televízió Insignia
- televízió Infiniton
- televízió Dell
- televízió Strong
- televízió VOX
- televízió Vivax
- televízió Thomson
- televízió Polaroid
- televízió Aiwa
- televízió Orima
- televízió V7
- televízió Clatronic
- televízió PEAQ
- televízió Qilive
- televízió Haier
- televízió Mitsubishi
- televízió Cecotec
- televízió Sencor
- televízió GPX
- televízió Küppersbusch
- televízió Innoliving
- televízió AOC
- televízió Westinghouse
- televízió Hitachi
- televízió Continental Edison
- televízió Telefunken
- televízió Nevir
- televízió Monster
- televízió Roadstar
- televízió Optoma
- televízió CHiQ
- televízió Viewsonic
- televízió Nextbase
- televízió Denver
- televízió Bush
- televízió Trevi
- televízió Albrecht
- televízió Daewoo
- televízió Funai
- televízió Tesla
- televízió Smart Tech
- televízió Muse
- televízió Energy Sistem
- televízió OK
- televízió SVAN
- televízió Loewe
- televízió RevolutionHD
- televízió Polar
- televízió Manhattan
- televízió Kogan
- televízió Horizon
- televízió Intenso
- televízió Furrion
- televízió Teac
- televízió Aspes
- televízió Digihome
- televízió Manta
- televízió Blaupunkt
- televízió Sagem
- televízió Jay-Tech
- televízió Logik
- televízió Finlux
- televízió Peerless-AV
- televízió Abus
- televízió AG Neovo
- televízió Bang & Olufsen
- televízió Iiyama
- televízió AKAI
- televízió TechniSat
- televízió Seiki
- televízió Jensen
- televízió Pyle
- televízió Emerson
- televízió Sanyo
- televízió Kemo
- televízió Salora
- televízió Lenco
- televízió Schneider
- televízió Philco
- televízió ECG
- televízió Uniden
- televízió Technika
- televízió NEC
- televízió Element
- televízió Soundmaster
- televízió Alphatronics
- televízió AYA
- televízió MBM
- televízió Krüger&Matz
- televízió Dual
- televízió Brandt
- televízió Wharfedale
- televízió Allview
- televízió RCA
- televízió OKI
- televízió Orion
- televízió SereneLife
- televízió Schaub Lorenz
- televízió Luxor
- televízió Metz
- televízió ILive
- televízió Graetz
- televízió Tatung
- televízió Packard Bell
- televízió EasyMaxx
- televízió Orava
- televízió Arçelik
- televízió Planar
- televízió Zenith
- televízió Doffler
- televízió QBell Technology
- televízió SYLVOX
- televízió Majestic
- televízió Reflexion
- televízió FFalcon
- televízió Megasat
- televízió Sogo
- televízió United
- televízió Techwood
- televízió Newstar
- televízió Matsui
- televízió Alden
- televízió Aldi
- televízió Airis
- televízió Aristona
- televízió Apex
- televízió Icy Box
- televízió Lexibook
- televízió Palsonic
- televízió Walker
- televízió Saba
- televízió Antarion
- televízió Kernau
- televízió Tevion
- televízió Proscan
- televízió Vestel
- televízió Tucson
- televízió Sunstech
- televízió Nabo
- televízió Sylvania
- televízió Sunny
- televízió Marquant
- televízió Nordmende
- televízió AudioAffairs
- televízió Magnum
- televízió Audiosonic
- televízió Kubo
- televízió Proline
- televízió Coby
- televízió Seg
- televízió Vivo
- televízió Daitsu
- televízió Terris
- televízió Changhong
- televízió Alba
- televízió Naxa
- televízió Star-Light
- televízió Fantec
- televízió Mpman
- televízió Sweex
- televízió Vizio
- televízió Cello
- televízió Mx Onda
- televízió Nikkei
- televízió Hannspree
- televízió DGM
- televízió Yasin
- televízió Humax
- televízió XD Enjoy
- televízió MT Logic
- televízió Superior
- televízió Kunft
- televízió ITT
- televízió Grunkel
- televízió Avtex
- televízió Inovia
- televízió Odys
- televízió NPG
- televízió Bluesky
- televízió Videocon
- televízió Xoro
- televízió Durabase
- televízió HKC
- televízió Edenwood
- televízió Woxter
- televízió Premier
- televízió Onn
- televízió Teleco
- televízió Opera
- televízió LTC
- televízió JTC
- televízió Zalman
- televízió Ferguson
- televízió Viewpia
- televízió JGC
- televízió Online
- televízió Dyon
- televízió DirecTV
- televízió Tele 2
- televízió Telesystem
- televízió EKO
- televízió E-motion
- televízió Mitsai
- televízió Selfsat
- televízió High One
- televízió Tve
- televízió ISymphony
- televízió Pantel
- televízió Magnavox
- televízió ATYME
- televízió HCI
- televízió Inno-Hit
- televízió Lin
- televízió Engel
- televízió TechLine
- televízió Elements
- televízió Englaon
- televízió Time
- televízió Reflex
- televízió Astar
- televízió Visco
- televízió Tivax
- televízió H&B
- televízió Norcent
- televízió TELE System
- televízió TIM
- televízió Oyster
- televízió Belson
- televízió Vision Plus
- televízió Sbr
- televízió Bauhn
- televízió Voxx
- televízió Rm 2000
- televízió Hoher
- televízió Felson
- televízió Mach Power
- televízió Elbe
- televízió Axing
- televízió CGV
- televízió Séura
- televízió Mitzu
- televízió Caratec
- televízió JTC24
- televízió Coocaa
- televízió Kivi
- televízió Smart Brand
- televízió Voxicon
- televízió Aconatic
- televízió Mitchell & Brown
- televízió FOX Electronics
- televízió Mystery
Legújabb útmutatók televízió
31 Március 2025
31 Március 2025
31 Március 2025
31 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
29 Március 2025
29 Március 2025
29 Március 2025