Használati útmutató PAC GMK403

Olvassa el alább 📖 a magyar nyelvű használati útmutatót PAC GMK403 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
©2016 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver.1/16 PRINT Ver. 8/13
GMK403 Mounting Kit
VEHICLE APPLICATION
Buick
2013-16 ENCLAVE
Chevrolet
2013-16 TRAVERSE
GMC
2013-16 ACADIA
iGMK403
WWW.AIUS.NET
2500 East Francis Street Ontario, CA 91761, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006
CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
DASH DISASSEMBLY INSTRUCTIONS
1. Carefully unclip the dash trim bezel from around the radio (see photo below),
disconnect the climate control harness and remove trim bezel.
2. Remove the (4) Phillips screws securing the radio/hazard button assembly
to the sub-dash.
3. Pull radio forward, disconnect the wire harness(s) and antenna lead and
remove radio/hazard button assembly.
4. There is no need to unplug and remove the hazard button assembly,
just set aside carefully.
SINGLE ISO w/POCKET INSTALLATION INSTRUCTIONS
1. Insert ISO brackets to rear of kit as shown in Figure A
2. Insert pocket into lower section of kit from rear & lock into slots of mounting brackets.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible or screws supplied with kit.
4. Slide radio forward or backward for desired look and tighten screws.
5. Attach a rear support bracket to the rear of the new radio and adjust as necessary
to support the weight of the radio (Optional)
23
Fig A
ISOBRK
ISOBRK
DOUBLE DIN INSTALLATION INSTRUCTIONS
1. Attach ISO brackets to the rear of the main mounting kit.
2. Slide radio into kit from rear & attach to ISO mounting brackets using
screws supplied with radio when possible or screws supplied with kit
(do not tighten screws at this time).
3. Slide radio forward or backward for your desired look and then tighten
the mounting screws.
4. Suggested...Attach rear support.
Fig B
ISOBRK
ISOBRK
Remove shaded tabs
on left and right sides
of the brackets
(Right side not shown)

Termékspecifikációk

Márka: PAC
Kategória: nincs kategorizálva
Modell: GMK403

Szüksége van segítségre?

Ha segítségre van szüksége PAC GMK403, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva PAC

PAC

PAC RP4-GM31 Útmutató

4 Szeptember 2024
PAC

PAC NU-GM51 Útmutató

4 Szeptember 2024
PAC

PAC NAV-1129 Útmutató

4 Szeptember 2024
PAC

PAC LP7-2R Útmutató

4 Szeptember 2024
PAC

PAC LP7-4 Útmutató

4 Szeptember 2024
PAC

PAC GMK367B Útmutató

4 Szeptember 2024
PAC

PAC CP1-FRD1 Útmutató

4 Szeptember 2024
PAC

PAC C2A-CHY5 Útmutató

4 Szeptember 2024
PAC

PAC NU-GM3 Útmutató

4 Szeptember 2024
PAC

PAC CP1-TSL1 Útmutató

4 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva