Használati útmutató Ozito PXWLS-2000

Ozito nincs kategorizálva PXWLS-2000

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito PXWLS-2000 (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
STANDARD EQUIPMENT
PXWLS-2000
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V DC
Light Output: 2,000lumens
Light Rotation Range: 360°
Frame Rotation Range: 0 -130°
Weight: 1.25kg
ozito.com.au
0819
Cordless Worklight
CORDLESS
WORKLIGHT
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Fitting The Battery
1. Slide the battery into the drill
base until it clicks into place.
Removing The Battery
1. Hold down the battery release
button.
2. Slide the battery out.
Note: Ensure the worklight is placed on a stable surface to avoid
breakage.
1. Sure Grip Handle
2. Frame
3. Worklight
4. Worklight Adjustment Knob
5. Frame Adjustment Knob
6. Hanging Hook
7. Dimming Knob
8. Battery Seating
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
CORDLESS WORKLIGHT
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. BATTERY INSTALLATION
SETUP & PREPARATION
1
2
3
4
5
7
8
6
Rotating The Worklight
1. Hold onto the worklight and
rotate the twoworklight
adjustment knobs anti-clockwise
to loosen them.
2. Adjust the light to the desired
angle.
3. Whilst holding the worklight in
place, rotate the two adjustment
knobs clockwise to tighten them
into place.
Rotating The Frame
1. Turn the frame adjustment knobs
anti-clockwise to loosen them.
2. Rotate the frame to the desired
angle.
3. Turn the frame adjustment knobs
clockwise to hold the frame in
place.
Using The Hanging Hook
1. Turn the frame adjustment knobs
anti-clockwise to loosen them.
2. Rotate the frame halves apart as
far as they will go.
3. Turn the adjustment knobs
clockwise to lock the frame in
place.
4. Ensure the hanging hook is centred on the worklight frame, then hang the
worklight by the hook on an appropriate stand.
Note: Ensure the hook is securely attached onto the mounting location
2. ADJUSTING LIGHTING DIRECTION 3. HANGING THE WORKLIGHT
WARNING! DO NOT STARE DIRECTLY AT THE LIGHT.
POSITION THE LIGHT SO THAT IT SHINES ON THE
WORK AREA ONLY.

Termékspecifikációk

Márka: Ozito
Kategória: nincs kategorizálva
Modell: PXWLS-2000

Szüksége van segítségre?

Ha segítségre van szüksége Ozito PXWLS-2000, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Ozito

Ozito

Ozito PXLEK-1840 Útmutató

6 Január 2025
Ozito

Ozito PXBGSS-1815 Útmutató

11 December 2024
Ozito

Ozito PXBSPS-180 Útmutató

6 Október 2024
Ozito

Ozito SSH-240 Útmutató

6 Október 2024
Ozito

Ozito ADWH-913V Útmutató

2 Október 2024
Ozito

Ozito PXBLEK-418 Útmutató

25 Szeptember 2024
Ozito

Ozito DMC-1000 Útmutató

21 Szeptember 2024
Ozito

Ozito PXMFTS-018 Útmutató

19 Szeptember 2024
Ozito

Ozito PXBCSS-184 Útmutató

15 Szeptember 2024
Ozito

Ozito PXPPS-1820 Útmutató

30 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Panasonic

Panasonic CY-EM100N Útmutató

4 Április 2025
Panasonic

Panasonic CQ-DF602W Útmutató

4 Április 2025
Panasonic

Panasonic CQ-DF203W Útmutató

4 Április 2025
Panasonic

Panasonic SL-PR300 Útmutató

4 Április 2025
Panasonic

Panasonic SL-1210MK5 Útmutató

4 Április 2025
Panasonic

Panasonic SH-FX60 Útmutató

4 Április 2025
Sony

Sony BRC-HSD1 Útmutató

4 Április 2025
Sony

Sony BRBK-MF1 Útmutató

4 Április 2025
Sony

Sony HKCU-FP2 Útmutató

4 Április 2025
Sony

Sony HKC-P3300 Útmutató

4 Április 2025