Használati útmutató Ozito PXCBDK-250

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito PXCBDK-250 (10 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/10
STANDARD EQUIPMENT
1917
BRUSHLESS
1917
BRU S H L ES S
PXCBDS-018
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Chuck Size: Ø0.8-10mm Keyless
No Load Speed: 0-350 | 0-1,450/min
Torque Settings: 21
Max. Torque: 40Nm
Drilling Capacities: Ø25mm (Timber)
Ø10mm (Metal)
Weight: 0.79kg
ozito.com.au
0922
Compact Brushless Drill Driver
COMPACT
DRILL DRIVER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
If the tool has been operated on a supply voltage other than that specied
on the tool.
If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1917
BRUSHLESS
1. Keyless Chuck
2. Torque Adjustment Collar
3. Gear Selector
4. Forward/Reverse Button
5. Variable Speed Trigger
6. LED Light
7. Battery Seating
This tool is compatible with all batteries & chargers from the Ozito PXC range.
COMPACT BRUSHLESS DRILL DRIVER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
1 2 3
4
5
6
7
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button.
2. Slide the battery out.
Forward/Reverse Lever
1. To drill or drive screws, push the forward/reverse button towards the left
of the drill.
2. Push the button towards the right of the
tool to reverse the rotation.
Variable Speed Trigger
1. Squeeze the variable speed
trigger to start the tool.
Note: The more the variable
speed trigger is depressed, the
faster the drill bit will rotate.
2. Release the trigger to stop drilling.
Adjusting Torque
1. Rotate the torque collar to the
desired torque setting when
driving screws and bolts.
Note: Selecting a higher torque setting will allow the drill to use more
torque to drive the screw in or out. To prevent damaging the screw head,
it is recommended to start at a low torque setting and increase when
necessary.
2. Rotate the torque collar to the drill bit
icon when drilling holes.
Speed Control
The gear selector controls the speed of the drill. First gear allows slower
drilling with more torque, while second gear is suitable when less torque
but higher speed is required.
1. Slide the switch backward to
select rst gear.
2. Slide the switch forwards to
select second gear.
2. FITTING ACCESSORIES 3. CONTROLS
OPERATION
Installing A Drill Bit
1. Rotate the chuck collar anti-clockwise to open
the chuck.
2. Insert the drill bit, making sure it
is centred in the chuck.
3. Tighten the chuck by turning the chuck collar
clockwise.
4. Pull on the bit to ensure it is
rmly secured.
Removing A Drill Bit
1. Open the chuck by rotating the
chuck collar and remove the drill
bit.
WARNING! DO NOT HANDLE ACCESSORIES
WITHOUT GLOVES AS THEY ARE SHARP & CAN
BECOME HOT AFTER USE, POTENTIALLY CAUSING
INJURY.
1917
1917
B
BRU
19
1
1
Switch off before speed change.
1 2
1
1
Switch off before speed change.
1 2
1
Switch off before speed change.
1 2
b.
a.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.

Termékspecifikációk

Márka: Ozito
Kategória: nincs kategorizálva
Modell: PXCBDK-250

Szüksége van segítségre?

Ha segítségre van szüksége Ozito PXCBDK-250, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Ozito

Ozito

Ozito PXBGSS-1815 Útmutató

11 December 2024
Ozito

Ozito PXBSPS-180 Útmutató

6 Október 2024
Ozito

Ozito SSH-240 Útmutató

6 Október 2024
Ozito

Ozito ADWH-913V Útmutató

2 Október 2024
Ozito

Ozito PXBLEK-418 Útmutató

25 Szeptember 2024
Ozito

Ozito DMC-1000 Útmutató

21 Szeptember 2024
Ozito

Ozito PXMFTS-018 Útmutató

19 Szeptember 2024
Ozito

Ozito PXBCSS-184 Útmutató

15 Szeptember 2024
Ozito

Ozito PXPPS-1820 Útmutató

30 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025