Használati útmutató Ozito PXBIS-320

Ozito fúrógép PXBIS-320

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito PXBIS-320 (7 oldal) a fúrógép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/7
WHAT’S IN THE BOX
Brushless Impact Driver
Battery & Charger
sold separately
B
R
U
S
H
L
E
S
S
B
R
U
S
H
L
E
S
S
SPECIFICATIONS
Voltage: 18V
No Load Speed: 0-2900/min
Chuck Size: 6.35mm (1/4”) Hex
Impact Rate: 3000bpm
Max. Torque: 180Nm
Weight: 1.2kg
BRUSHLESS
IMPACT DRIVER
INSTRUCTION MANUAL
ozito.com.au
PXBIS-320
1 2 3 4 5
Inserting & Removing the Battery (not included)
1 Align the ribs of the battery with
the recess at the base of the
driver handle and push in until it
clicks into place.
2 To remove, press and
hold the battery release
tab and then slide out.
S
a
b
CAUTION! DO NOT HANDLE ACCESSORIES WITHOUT
GLOVES AS THEY ARE SHARP AND CAN BECOME HOT
AFTER USE, POTENTIALLY CAUSING PERSONAL INJURY.
E
S
S
b
b
S
H
L
E
S
S
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ºC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
4 The charger LED will illuminate
red signifying that the battery is
charging.
5 The charger LED will illuminate
green once the battery is fully
charged.
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH (Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.

Termékspecifikációk

Márka: Ozito
Kategória: fúrógép
Modell: PXBIS-320

Szüksége van segítségre?

Ha segítségre van szüksége Ozito PXBIS-320, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók fúrógép Ozito

Ozito

Ozito PXDDS-200 Útmutató

30 Szeptember 2024
Ozito

Ozito LCD-2050 Útmutató

9 Szeptember 2024
Ozito

Ozito BDP-450 Útmutató

20 Augusztus 2024
Ozito

Ozito HDR-1050U Útmutató

16 Augusztus 2024
Ozito

Ozito HDR-3000U Útmutató

13 Augusztus 2024
Ozito

Ozito HDR-1100U Útmutató

12 Augusztus 2024
Ozito

Ozito PXBHS-100U Útmutató

12 Augusztus 2024
Ozito

Ozito PXHDS-301U Útmutató

12 Augusztus 2024
Ozito

Ozito DP-350U Útmutató

10 Augusztus 2024
Ozito

Ozito PXDDS-201U Útmutató

7 Augusztus 2024

Útmutatók fúrógép

Legújabb útmutatók fúrógép

Einhell

Einhell AS-E 18-2 Útmutató

30 Március 2025
Verto

Verto 65H105 Útmutató

28 Március 2025
Makita

Makita HR2450 Útmutató

28 Március 2025
Makita

Makita HR5001C Útmutató

28 Március 2025
Makita

Makita 6501X Útmutató

28 Március 2025
Makita

Makita HK1800 Útmutató

28 Március 2025
Makita

Makita HR3000C Útmutató

28 Március 2025