Használati útmutató Ozito PXBHDK-250

Ozito nincs kategorizálva PXBHDK-250

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito PXBHDK-250 (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
STANDARD EQUIPMENT
BRUSHLESS
15 17 191311
BRUS HLESS
15 17 191311
PXBHS-180
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Chuck Size: Ø2-13mm Keyless
Chuck Material: Metal
No Load Speed: 0-500 / 0-1,800/min
Impact Rate: 0-8,000 / 0-28,000/min
Torque Settings: 20
Max. Torque: 50Nm
Drilling Capacities: Ø32mm (Timber)
Ø13mm (Metal)
Ø10mm (Masonry)
Weight: 1.6kg
ozito.com.au
0321
Brushless 13mm Hammer Drill
& Belt Clip
13MM
HAMMER DRILL
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
BRUSHLESS
15 17 191311
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button.
2. Slide the battery out.
1. Keyless Chuck
2. Torque Adjustment Collar
3. Function Collar
4. Gear Selector
5. Forward/Reverse Button
6. Variable Speed Trigger
7. LED Light
8. Battery Seating
9. Belt Clip
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
BRUSHLESS 13MM DRILL DRIVER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
1 2 3
5
7
8
9
6
4
Forward/Reverse Lever
1. To drill or drive screws, push the forward/reverse button towards the left
of the drill.
2. Push the button towards the right of the tool to reverse the rotation.
Variable Speed Trigger
1. Squeeze the variable speed
trigger to start the tool.
Note: The more the variable speed trigger is depressed, the faster the
drill bit will rotate.
2. Release the trigger to stop
drilling.
Installing A Drill Bit
1. Rotate the chuck collar anti-clockwise to open
the chuck.
2. Insert the drill bit, making sure it
is centred in the chuck.
3. Tighten the chuck by turning the chuck collar
clockwise.
4. Pull on the bit to ensure it is
rmly secured.
Removing A Drill Bit
1. Open the chuck by rotating the
chuck collar and remove the drill
bit.
WARNING! DO NOT HANDLE ACCESSORIES
WITHOUT GLOVES AS THEY ARE SHARP & CAN
BECOME HOT AFTER USE, POTENTIALLY CAUSING
INJURY.
2. FITTING ACCESSORIES 3. CONTROLS
OPERATION
15 17 191311
15 17 191311
11
BR
REV
FWD
1
BRUSHLESS
1
BRUSHLESS
a.
b.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.

Termékspecifikációk

Márka: Ozito
Kategória: nincs kategorizálva
Modell: PXBHDK-250

Szüksége van segítségre?

Ha segítségre van szüksége Ozito PXBHDK-250, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Ozito

Ozito

Ozito PXLEK-1840 Útmutató

6 Január 2025
Ozito

Ozito PXBGSS-1815 Útmutató

11 December 2024
Ozito

Ozito PXBSPS-180 Útmutató

6 Október 2024
Ozito

Ozito SSH-240 Útmutató

6 Október 2024
Ozito

Ozito ADWH-913V Útmutató

2 Október 2024
Ozito

Ozito PXBLEK-418 Útmutató

25 Szeptember 2024
Ozito

Ozito DMC-1000 Útmutató

21 Szeptember 2024
Ozito

Ozito PXMFTS-018 Útmutató

19 Szeptember 2024
Ozito

Ozito PXBCSS-184 Útmutató

15 Szeptember 2024
Ozito

Ozito PXPPS-1820 Útmutató

30 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Panasonic

Panasonic CY-EM100N Útmutató

4 Április 2025
Panasonic

Panasonic CQ-DF602W Útmutató

4 Április 2025
Panasonic

Panasonic CQ-DF203W Útmutató

4 Április 2025
Panasonic

Panasonic SL-PR300 Útmutató

4 Április 2025
Panasonic

Panasonic SL-1210MK5 Útmutató

4 Április 2025
Panasonic

Panasonic SH-FX60 Útmutató

4 Április 2025
Sony

Sony BRC-HSD1 Útmutató

4 Április 2025
Sony

Sony BRBK-MF1 Útmutató

4 Április 2025
Sony

Sony HKCU-FP2 Útmutató

4 Április 2025
Sony

Sony HKC-P3300 Útmutató

4 Április 2025