Használati útmutató Ozito PXAGS-115

Ozito nincs kategorizálva PXAGS-115

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito PXAGS-115 (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
STANDARD EQUIPMENT
METAL GRINDING DIS C
PXAGS-115
Made in China
• Always us e m etal guard.
• Do not excee d max. rated spee d.
• Flanges & w hee l MUST be
mounted corre ctly.
12,200
/min
MAX. SPEED
115
(4.5”)
mm
M14 SPINDLE
PXAGS-115
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 8,500/min
Disc Diameter: 115mm (4.5”)
Spindle: M14
Max. Cutting Depth: 28mm
Weight: 1.8kg
ozito.com.au
0622
Cordless Angle Grinder
Grinding Disc, Side Handle,
Pin Wrench & Cutting Guard
Attachment
115MM
ANGLE
GRINDER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Pull the pin wrench out from the side handle.
2 . Depress and hold the spindle lock
to prevent the spindle rotating.
3. Align the pins of the pin wrench
to the ange holes and loosen by
rotating it anti-clockwise.
4. Remove the ange and place the
grinding disc on the spindle.
1. Spindle Lock Button
2. Side Handle
3. On/Off Switch
4. Ventilation Mesh
5. Battery Seating
6. Sure Grip Handle
7. Grinding Guard
8. Pin Wrench
9. Grinding Disc
This tool is compatible with all batteries & chargers from the Ozito PXC range.
For optimal performance, we recommend the use of a 3.0Ah battery or
higher to operate this PXC Angle Grinder.
CORDLESS ANGLE GRINDER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE DISC
SETUP & PREPARATION
1 2 3 4
9 8 7 6 5
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! ALWAYS WEAR GLOVES WHEN
HANDLING THE DISC OR GUARD. THE DISC, GUARD
AND WORKPIECE WILL BECOME HOT DURING USE.
Adjusting The Grinding Guard
Hot sparks and sharp debris can be emitted from the disc during use. The
grinding guard should be positioned to block this from your face, hands and
body without obstructing the disc from the workpiece.
To reposition, rotate the grinding
guard until it clicks into the positive
stops.
Attaching The Cutting Guard Attachment
1. Align the lip of the grinding guard
with the edge of the cutting
guard attachment, using the
direction arrow as a guide.
2. Slide the attachment fully onto
the grinding guard until it clicks
into place.
WARNING! ENSURE THE CUTTING GUARD
ATTACHMENT IS FULLY AND PROPERLY ATTACHED
TO THE GRINDING GUARD.
3. To remove, ex the plastic tab on the attachment past the lip of the
guard, then slide the cutting guard attachment fully off the grinding
guard.
5. When assembling the outer ange, ensure you select the correct
orientation to suit the type of disc being tted.
Note: The upper part of the
spindle has 2 at sides cut
out. Ensure the at notches on
the inner ange are properly
seated on these at cut-outs.
Grinding disc: Place
outer flange with the
raised lip upwards.
WARNING! DO NOT USE THE CUTTING GUARD
ATTACHMENT WHEN USING THE ANGLE GRINDER
WITH A GRINDING DISC AND PERFORMING
GRINDING OPERATIONS.
Cutting disc: Place
outer flange with
the raised lip
downwards.
WARNING! WHEN USING THE ANGLE GRINDER
WITH A CUTTING DISC, THE CUTTING GUARD
ATTACHMENT MUST BE FITTED PRIOR TO
OPERATION. FAILURE TO DO SO MAY RESULT IN
SERIOUS INJURY.
6. Screw the ange back onto the spindle and tighten using the pin wrench
while holding the spindle lock down.
2. ASSEMBLY
TOP VIEW OF
INNER FLANGE
INNER FLANGE
FLAT NOTCHES
SPINDLE
FLAT CUT-OUT
METAL GRINDIN
115
(4.5”)
mm
M14 SP INDL
I
0
a.
b.
INNER
FLANGE
SPINDLE
OUTER
FLANGE
CUTTING
DISC

Termékspecifikációk

Márka: Ozito
Kategória: nincs kategorizálva
Modell: PXAGS-115

Szüksége van segítségre?

Ha segítségre van szüksége Ozito PXAGS-115, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Ozito

Ozito

Ozito PXLEK-1840 Útmutató

6 Január 2025
Ozito

Ozito PXBGSS-1815 Útmutató

11 December 2024
Ozito

Ozito PXBSPS-180 Útmutató

6 Október 2024
Ozito

Ozito SSH-240 Útmutató

6 Október 2024
Ozito

Ozito ADWH-913V Útmutató

2 Október 2024
Ozito

Ozito PXBLEK-418 Útmutató

25 Szeptember 2024
Ozito

Ozito DMC-1000 Útmutató

21 Szeptember 2024
Ozito

Ozito PXMFTS-018 Útmutató

19 Szeptember 2024
Ozito

Ozito PXBCSS-184 Útmutató

15 Szeptember 2024
Ozito

Ozito PXPPS-1820 Útmutató

30 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025
IFM

IFM PG1704 Útmutató

9 Április 2025
Daikin

Daikin EKWCTRDI1V3 Útmutató

9 Április 2025
Simplified MFG

Simplified MFG SP18CAT120 Útmutató

9 Április 2025