Használati útmutató OSD Audio WSK-100

OSD Audio Vevő WSK-100

Olvassa el alább 📖 a magyar nyelvű használati útmutatót OSD Audio WSK-100 (2 oldal) a Vevő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
F C C C O M P L I A N C E W A R R A N T Y
FCC Information:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop
using your product. Changes or modifications not expressly by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warranty Information:
All OSD AUDIO electronics have (2) year Limited Warranty against defects in ma-
terials and workmanship. Proof of purchase must accompany all claims. During
the warranty period OSD AUDIO will replace any defective part and correct any
defect in workmanship without charge for either parts or labor
OSD AUDIO may replace returned electronics with a product of equal value and
performance. In such cases, some modications to the mounting may be
necessary and are not OSD AUDIO’s responsibility.
For this warranty to apply, the unit must be installed and used according to its
written instructions. If necessary, repairs must be performed by OSD AUDIO.
The unit must be returned to OSD AUDIO at the owner’s expense and with prior
written permission. Accidental damage and shipping damage are not considered
defects, nor is damaged resulting from abuse or from servicing performed by an
agency or person not specically authorized in writing by OSD Audio
OSD AUDIO sells products only through authorized dealers and distributors
to ensure that customers obtain proper support and service. Any OSD AUDIO
product purchased from an unauthorized dealer or other source, including retail-
ers, mail order dealers and online sellers will not be honored or serviced under
existing OSD AUDIO warranty policy. Any sale of product by an unauthorized
source or other manner not authorized by OSD AUDIO shall void the warranty on
the applicable product.
Damage to or destruction of components due to application of excessive power
voids the warranty on those parts. In these cases, repairs will be made on the
basis of the retail value of the parts and labor. To return for repairs, you must
email customer service at RMA@OSDAUDIO.com for a Returned Merchandise
Authorization (RMA) number then the unit must be shipped to OSD AUDIO at the
owner’s expense, along with a note explaining the nature of service required. Be
sure to pack the product(s) in a corrugated container with at least 3 inches of
resilient material to protect the unit from damage in transit.
This Warranty Does Not Cover: Damage caused by abuse, accident, misuse,
negligence, or improper operation (installation) • Any products that have been
altered or modied • Any product whose identifying number of decal, serial #,
etc. has been altered, defaced or removed • Normal wear and maintenance. OSD Audio | 775 Columbia Street Brea, CA. 92821 | osdaudio.com
WIRELESS SUBWOOFER KIT
USERS GUIDE
P A C K A G E C O N T E N T S S E T U P
S E T U P
● Transmitter ● Receiver
● RCA Cable ● 9V AC Adapter (2)
● Users Guide
Place the transmitter and receiver within 100 feet of each other, on a
flat surface or mounted on a wall.
-OR-
LED Indicator
1. With the audio source off, connect the transmitter to the
subwoofer jack with the RCA cable.
2. Connect the supplied AC adapter (9V, 200mA) to the transmitter
DC IN 9V jack, and then plug it into a standard household outlet.
3. Connect the receiver to your subwoofer with the RCA cable.
4. Connect the supplied AC adapter (9V, 200 mA) to the receiver DC
IN 9V jack, and then plug it into a standard household outlet.
NOTE:
● Use only the supplied AC adapters. Using adapters not designed
for this product may cause damage.
● If you mount the receiver on a wall, do not block the ventilation
slots.
● Unplug the AC adapters from the AC outlet before disconnecting
from the transmitter or receiver.
Using Your Subwoofer Kit
When connected, the transmitter
and the receiver LED’s light green.
When the audio source is active, the
speakers automatically activate, and
the LED’s light blue.
NOTE:
After powering on, if there is no
signal input within 17 minutes, the
subwoofer kit enters standby mode.
Optimize Your System
many surround systems let you
adjust the delay between the front
and rear speakers. To optimize your
setup, adjust the rear speaker delay
response by about 20 milliseconds.
Changing Channels
If you experience any interference,
press and hold the button on both M
units. The units will automatically
match up.
S P E C I F I C A T I O N S
Features:
● 2.4GHz digital wireless link provides crystal clear audio.
● 34-channel selection.
● Up to 100 feet (30.5m) operation distance between transmitter and
receiver (line of sight).
Specs:
Audio Output Level 2V
Frequency Response 20-200Hz
Audio Distortion <1%
Signal to Noise Ratio >80dB
Specifications are subject to change and improvement without
notice. Actual product may vary from the images found in this
document.

Termékspecifikációk

Márka: OSD Audio
Kategória: Vevő
Modell: WSK-100

Szüksége van segítségre?

Ha segítségre van szüksége OSD Audio WSK-100, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vevő OSD Audio

OSD Audio

OSD Audio Nero HTX4150 Útmutató

14 Január 2025
OSD Audio

OSD Audio NERO MAX8 Útmutató

2 Január 2025
OSD Audio

OSD Audio HTD4150 Útmutató

28 December 2024
OSD Audio

OSD Audio SMP1000 DSP Útmutató

28 December 2024
OSD Audio

OSD Audio DAC-X-X200 Útmutató

24 Szeptember 2024
OSD Audio

OSD Audio MX1280 Gen2 Útmutató

3 Szeptember 2024
OSD Audio

OSD Audio MX880 Gen2 Útmutató

3 Szeptember 2024
OSD Audio

OSD Audio MX1680 Gen2 Útmutató

3 Szeptember 2024
OSD Audio

OSD Audio Nero HTA7200 Útmutató

3 Szeptember 2024
OSD Audio

OSD Audio XMP60 Útmutató

19 Augusztus 2024

Útmutatók Vevő

Legújabb útmutatók Vevő

Yamaha

Yamaha Aventage RX-A4A Útmutató

9 Április 2025
Yamaha

Yamaha Aventage RX-A8A Útmutató

9 Április 2025
DJI

DJI D-RTK 3 Útmutató

5 Április 2025
Phonocar

Phonocar PH544 Útmutató

5 Április 2025
QSC

QSC SPA-Qf 60x2 Útmutató

2 Április 2025
Harper

Harper HDT2-5010 Útmutató

2 Április 2025
Harper

Harper HDT2-2010 Útmutató

2 Április 2025
Alpine

Alpine MRX-F65 Útmutató

31 Március 2025
Streacom

Streacom TL1 Útmutató

31 Március 2025
Pro-Ject

Pro-Ject Stereo Box DS Útmutató

30 Március 2025