Használati útmutató OKI C5850dn
Olvassa el alább 📖 a magyar nyelvű használati útmutatót OKI C5850dn (112 oldal) a nyomtató kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/112
C5650
C5850
User’s Guide
C5000 Series
C5000
TM
Preface > 2
P
REFACE
Every effort has been made to ensure that the information in this document is
complete, accurate, and up-to-date. The manufacturer assumes no responsibility
for the results of errors beyond its control. The manufacturer also cannot guarantee
that changes in software and equipment made by other manufacturers and referred
to in this guide will not affect the applicability of the information in it. Mention of
software products manufactured by other companies does not necessarily constitute
endorsement by the manufacturer.
While all reasonable efforts have been made to make this document as accurate and
helpful as possible, we make no warranty of any kind, expressed or implied, as to
the accuracy or completeness of the information contained herein.
The most up-to-date drivers and manuals are available from the Oki Europe
website:
http://www.okiprintingsolutions.com
Copyright © 2007. All rights reserved.
Oki and Microline are registered trademarks of Oki Electric Industry Company, Ltd.
Energy Star is a trademark of the United States Environmental Protection Agency.
Hewlett-Packard, HP, and LaserJet are registered trademarks of Hewlett-Packard
Company.
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft
Corporation.
Apple, Macintosh, Mac and Mac OS are registered trademarks of Apple Computer.
Other product names and brand names are registered trademarks or trademarks of
their proprietors.
As an Energy Star Program Participant, the manufacturer has
determined that this product meets the Energy Star guidelines for
energy efficiency.
This product complies with the requirements of the Council
Directives 2004/108/EC (EMC) and 2006/95/EC (LVD) and 1999/5/
EC (R&TTE), as amended where applicable on the approximation of
the laws of the member states relating to Electromagnetic
Compatibility and Low Voltage and Radio and Telecommunications
Terminal Equipment.
Please note that Microsoft Windows XP was used to produce all screenshots in this
manual. These screenshots may vary if you are using any other operating system,
but the principle is the same.
Preface > 3
E
MERGENCY
F
IRST
A
ID
Take care with toner powder:
If swallowed, induce vomiting and seek medical attention. Never attempt
to induce vomiting if person is unconscious.
If inhaled, move the person to an open area for fresh air. Seek medical
attention.
If it gets into the eyes, flush with large amounts of water for at least 15
minutes keeping eyelids open. Seek medical attention.
Spillages should be treated with cold water and soap to help reduce risk
of staining skin or clothing.
M
ANUFACTURER
Oki Data Corporation,
4-11-22 Shibaura, Minato-ku,
Tokyo 108-8551, Japan
I
MPORTER
TO
THE
EU/A
UTHORISED
R
EPRESENTATIVE
Oki Europe Limited (trading as OKI Printing Solutions)
Central House
Balfour Road
Hounslow
TW3 1HY
United Kingdom
For all sales, support and general enquiries contact your local distributor
E
NVIRONMENTAL
INFORMATION
Contents > 5
Transfer belt: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Fuser: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Consumable order details . . . . . . . . . . . . . . . . . . . . 74
Toner cartridge replacement . . . . . . . . . . . . . . . . . . 75
Image drum replacement . . . . . . . . . . . . . . . . . . . . 80
Replacing the belt unit . . . . . . . . . . . . . . . . . . . . . . 84
Fuser replacement . . . . . . . . . . . . . . . . . . . . . . . . . 87
Cleaning the LED head . . . . . . . . . . . . . . . . . . . . . . 89
Installing upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Duplex unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Memory upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Additional paper tray. . . . . . . . . . . . . . . . . . . . . . . . 95
Adjusting Windows printer drivers . . . . . . . . . . . . . . 96
Storage Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Clearing paper jams . . . . . . . . . . . . . . . . . . . . . . . . . 97
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Oki contact details . . . . . . . . . . . . . . . . . . . . . . . . . 111
Introduction > 7
I
NTRODUCTION
Congratulations on buying this Oki Printing Solutions colour
printer. Your new printer is designed with advanced features to
give you clear, vibrant colour prints and crisp black and white
pages at high speed on a range of print media for the office.
Your printer includes these features:
>ProQ2400, multi-level technology produces subtler tones
and smoother gradations of colour to lend photographic
quality to your documents;
>Up to 22 (C5650) or 26 (C5850) pages per minute in full
colour for fast printing of high impact colour presentations
and other documents;
>Up to 32 pages per minute in black and white for fast and
efficient printing of all general purpose documents not
requiring colour;
>600 x 600, 1200 x 600 dpi (dots per inch) and ProQ2400
print resolution for high quality image production showing
the finest detail;
>Single Pass colour Digital LED technology for high speed
processing of your printed pages;
>10Base-T and 100Base-TX network connection lets you
share this valuable resource among users on your office
network;
>Photo Enhance mode to improve printouts of photographic
images;
>“Ask Oki” – a user-friendly function for Windows that
provides a direct link from your printer driver screen to a
dedicated web site specific to the exact model you are
using. This is where you’ll find all the advice, assistance
and support you could need to help you get the best
possible results from your Oki printer;
>“WebPrint Internet Explorer plugin” - another function for
Windows that enables you to print web pages properly;
>Template Manager 2006 utility for Windows enables the
design and print of Business cards, banners, labels with
ease.
Introduction > 8
Additionally, the following optional features are also available:
>Automatic two-sided (duplex) printing for economical use
of paper and compact printing of larger documents
(standard on dn models);
>Additional paper tray for loading a further 530 sheets to
minimise operator intervention, or different paper stocks
for letterhead stationery, alternative paper sizes or other
print media;
>Additional memory allows printing of more complex
pages. For example, high resolution banner printing;
>Storage Cabinet.
Introduction > 9
P
RINTER
OVERVIEW
F
RONT
VIEW
The LCD display language can be changed to show different
languages. (See “Changing the display language” on page 11.)
1. Output stacker, face
down.
Standard printed copy
delivery point. Holds
up to 250 sheets at
80g/m².
2. Operator panel.
Menu driven operator
controls and LCD
display panel.
3. Paper tray.
Standard blank paper
tray. Holds up to 300
sheets of 80g/m²
paper.
4. Multi purpose tray (80g/m²).
Used for feeding heavier paper
stocks, envelopes and other special
media. Also for manual feeding of
single sheets when required.
5. ON/OFF switch.
6. Front cover release lever.
7. Multi-purpose tray release lever
8. Top cover release button.
8
2
7
6
3
4
5
7
8
1
Introduction > 11
C
HANGING
THE
DISPLAY
LANGUAGE
The default language used by your printer for display messages
and for report printing is English. If required, this can be changed
to:l
German Danish
French Dutch
Italian Turkish
Spanish Portuguese
Swedish Polish
Russian Greek
Finnish Czech
Hungarian Norwegian
NOTE
1. The list above is neither conclusive nor exhaustive.
2. See the information enclosed with the product (Operator
Panel Language Set-up utility) on the procedure for
changing the language setting.
Paper recommendations > 12
P
APER
RECOMMENDATIONS
Your printer will handle a variety of print media, including a range
of paper weights and sizes, transparencies and envelopes. This
section provides general advice on choice of media, and explains
how to use each type.
The best performance will be obtained when using standard
75~90g/m² paper designed for use in copiers and laser printers.
Suitable types are:
>Arjo Wiggins Conqueror Colour Solutions 90g/m²;
>Colour Copy by Neusiedler.
Use of heavily embossed or very rough textured paper is not
recommended.
Pre-printed stationery can be used, but the ink must not offset
when exposed to the high fuser temperatures used in the printing
process.
Envelopes should be free from twist, curl or other deformations.
They should also be of the rectangular flap type, with glue that
remains intact when subjected to hot roll pressure fusing used in
this type of printer. Window envelopes are not suitable.
Transparencies should be of the type designed for use in
copiers and laser printers. We strongly recommend Oki Printing
Solutions transparencies (Order No. 01074101). In particular,
avoid office transparencies designed for use by hand with marker
pens. These will melt in the fuser and cause damage.
Labels should also be of the type recommended for use in
copiers and laser printers, in which the base carrier page is
entirely covered by labels. Other types of label stock may
damage the printer due to the labels peeling off during the
printing process.
Paper recommendations > 13
C
ASSETTE
TRAYS
If you have identical paper stock loaded in another tray (2nd tray
if you have one, or multi purpose tray) you can have the printer
automatically switch to the other tray when the current tray runs
out of paper. When printing from Windows applications, this
function is enabled in the driver settings. (See “Printer Settings
in Windows” later in this guide.) When printing from other
systems, this function is enabled in the Print Menu. (See “Menu
Functions” later in this guide.)
M
ULTI
PURPOSE
TRAY
The multi purpose tray can handle the same sizes as the cassette
trays but in weights up to 203g/m². For very heavy paper stock
use the face up (rear) paper stacker. This ensures that the paper
path through the printer is almost straight.
The multi purpose tray can feed paper widths as small as 100mm
and lengths up to 1200mm (banner printing).
For paper lengths exceeding 356mm (Legal 14in.) use paper
stock between 90g/m² and 128g/m² and the face up (rear) paper
stacker.
Use the multi purpose tray for printing on envelopes and
transparencies. Up to 50 sheets of transparencies or 10
envelopes can be loaded at one time, subject to a maximum
stacking depth of 10mm.
Paper or transparencies should be loaded print side up and top
edge into the printer. Do not use the duplex (two-sided printing)
function.
SIZE DIMENSIONS WEIGHT (G/M²)
A6 (Tray 1 only) 105 x 148mm
Light 64-74g/m²
Medium 75-104g/m²
Heavy 105-120g/m²
Ultra heavy 121-203g/m²
(Tray 2/MPT only)
A5 148 x 210mm
B5 182 x 257mm
Executive 184.2 x 266.7mm
A4 210 x 297mm
Letter 215.9 x 279.4mm
Legal 13in. 216 x 330mm
Legal 13.5in. 216 x 343mm
Legal 14in. 216 x 356mm
Paper recommendations > 14
F
ACE
DOWN
STACKER
The face down stacker on the top of the printer can hold up to
250 sheets of 80g/m² standard paper, and can handle paper
stocks up to 176g/m². Pages printed in reading order (page 1
first) will be sorted in reading order (last page on top, facing
down).
F
ACE
UP
STACKER
The face up stacker at the rear of the printer should be opened
and the tray extension pulled out when required for use. In this
condition paper will exit via this path, regardless of driver
settings.
The face up stacker can hold up to 100 sheets of 80g/m²
standard paper, and can handle stocks up to 203g/m².
Always use this stacker and the multi purpose feeder for paper
stocks heavier than 176g/m².
D
UPLEX
UNIT
This option provides automatic two-sided printing on the same
range of paper sizes as tray 2 (i.e. all cassette sizes except A6),
using paper stocks from 75-105g/m².
NOTE
The duplex unit comes as standard with dn models.
Loading paper > 15
L
OADING
PAPER
C
ASSETTE
TRAYS
1. Remove the paper tray from the printer.
2.
Fan the paper to be loaded at the edges (1) and in the
middle (2) to ensure that all sheets are properly separated,
then tap the edges of the stack on a flat surface to make it
flush again (3).
1
2
3
Loading paper > 16
3. Load letter headed paper face down and top edge towards
the front of the printer, as shown.
4. Adjust the rear stopper (1) and paper guides (2) to the
size of paper being used.
To prevent paper jams:
>Do not leave space between the paper and the guides
and rear stopper.
>Do not overfill the paper tray. Capacity depends on the
type of paper stock.
>Do not load damaged paper.
>Do not load paper of different sizes or types at the
same time.
>Do not pull the paper tray out during printing (except
as described below for the 2nd tray).
>Close the paper tray gently.
5. If you have two trays and you are printing from the 1st
(upper) tray, you can pull out the 2nd (lower) tray during
printing to reload it. However, if printing from the 2nd
(lower) tray, do not pull out the 1st (upper) tray. This will
cause a paper jam.
2 1
Loading paper > 18
M
ULTI
PURPOSE
TRAY
1. Open the multi purpose tray (1).
2. Fold out the paper supports (2).
3. Press gently down on the paper platform (3) to ensure it
is latched down.
4. Load the paper and adjust the paper guides (4) to the size
of paper being used.
>For single-sided printing on headed paper load the
paper into the multi purpose tray with pre-printed side
up and top edge into the printer.
2
4
45
1
3
Loading paper > 19
>For two-sided (duplex) printing on headed paper load
the paper with pre-printed side down and top edge
away from the printer. (Optional duplex unit must be
installed for this function.)
>Envelopes should be loaded face up with top edge to
the left and short edge into the printer. Do not select
duplex printing on envelopes.
>Do not exceed the paper capacity of about 50 sheets or
10 envelopes. Maximum stacking depth is 10mm.
5. Press the tray latch button (5) inwards to release the
paper platform, so that the paper is lifted and gripped in
place.
Set the correct paper size for the multi purpose tray in the Media
Menu (see “Menu Functions”).
Printer settings in Windows > 21
S
ETUP
TAB
When you click the Properties
button from your application’s
Print dialogue, the driver
window opens to allow you to
specify your printing
preferences for the current
document.
1. Paper size should be the
same as the page size of
your document (unless
you wish to scale the
printout to fit another
size), and should also be
the same as the size of
paper you will feed into the printer.
2. You can choose the source of the paper to feed, which
may be Tray 1 (the standard paper tray), Tray 2 (if you
have the optional 2nd paper tray installed) or the multi
purpose feeder. You can also click on the appropriate part
of the screen graphic to select your preferred tray.
3. The setting for paper weight should match the type of
paper on which you intend to print.
4. A variety of document finishing options can be selected,
such as normal one page per sheet, or N-up (where N can
be any number up to 16) for printing scaled down pages
at more than one page per sheet. Booklet printing prints
two pages per sheet on each side of the paper so that
when folded they make up a booklet. Booklet printing
requires the duplex unit to be installed in your printer.
Poster printing will print large pages as tiles spread over
multiple sheets.
5. For two-sided printing, you can choose to flip the page by
the long edge or the short edge. Of course, this requires
that a duplex unit be installed in your printer.
6. If you have changed some printing preferences before and
saved them as a set, you can recall them to avoid having
to set them individually each time you need them.
7. A single on-screen button restores the default settings.
1
2
3
4
5
6
7
Printer settings in Windows > 22
J
OB
OPTIONS
TAB
1. The output resolution of the printed page can be set as
follows.
>The ProQ2400 setting prints at 600 x 600dpi x 2 bit.
This option requires the most printer memory and
takes the longest to print.
>The Fine/Detail setting prints at 1200 x 600dpi and is
adequate for all but the most discerning applications.
>The Normal setting prints at 600 x 600dpi and is
suitable for most draft documents, where print quality
is less critical.
2. You can print watermark text behind the main page
image. This is useful for marking documents as draft,
confidential, etc.
3. You can select up to 999 copies to print consecutively,
although you will need to top up the paper tray during
such a long print run.
4. Page orientation can be set to either portrait (tall) or
landscape (wide).
5. You printed pages can be scaled to fit larger or smaller
stationery.
6. Clicking the Advanced button gives you access to further
settings. For example, you can elect to have black areas
printed using 100%K toner (a more matte appearance).
7. A single on-screen button restores the default settings.
8. The quality of photographic images can be improved.
Printer settings in Windows > 24
S
ETTING
FROM
W
INDOWS
CONTROL
PANEL
When you open the driver properties window directly from
Windows, rather than from within an application program, a
somewhat more extensive range of settings is provided. Changes
made here will generally affect all documents you print from
Windows applications, and will be remembered from one
Windows session to the next.
G
ENERAL
TAB
1. This area lists some of the main features of your printer,
including optional items, such as duplex (two-sided)
printing.
2. This button opens the same windows as described earlier
for items which can be set from within application
programs. Changes you make here, however, will become
the new default settings for all Windows applications.
3. This button prints a test page to ensure that your printer
is working.
1
2 3
Termékspecifikációk
| Márka: | OKI |
| Kategória: | nyomtató |
| Modell: | C5850dn |
Szüksége van segítségre?
Ha segítségre van szüksége OKI C5850dn, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nyomtató OKI
10 Április 2025
10 Április 2025
10 Április 2025
16 Október 2024
16 Október 2024
14 Október 2024
13 Október 2024
5 Október 2024
2 Október 2024
24 Szeptember 2024
Útmutatók nyomtató
- nyomtató Samsung
- nyomtató Sony
- nyomtató Fujitsu
- nyomtató LG
- nyomtató Olympus
- nyomtató Panasonic
- nyomtató Canon
- nyomtató StarTech.com
- nyomtató Sharp
- nyomtató Lenovo
- nyomtató Toshiba
- nyomtató HP
- nyomtató Roland
- nyomtató Digitus
- nyomtató Zebra
- nyomtató AVM
- nyomtató Fujifilm
- nyomtató Dell
- nyomtató Xerox
- nyomtató Primera
- nyomtató Thomson
- nyomtató Polaroid
- nyomtató Kyocera
- nyomtató Ricoh
- nyomtató Epson
- nyomtató Huawei
- nyomtató Renkforce
- nyomtató Mitsubishi
- nyomtató Godex
- nyomtató Brother
- nyomtató Citizen
- nyomtató Microboards
- nyomtató Kodak
- nyomtató MSI
- nyomtató Dymo
- nyomtató Testo
- nyomtató Konica Minolta
- nyomtató Datamax O'Neil
- nyomtató Kogan
- nyomtató Honeywell
- nyomtató Velleman
- nyomtató D-Link
- nyomtató Fargo
- nyomtató TSC
- nyomtató Sagem
- nyomtató Olympia
- nyomtató Tomy
- nyomtató Posiflex
- nyomtató ZKTeco
- nyomtató NEC
- nyomtató CUSTOM
- nyomtató Panduit
- nyomtató Equip
- nyomtató Pantum
- nyomtató Brady
- nyomtató Bixolon
- nyomtató CSL
- nyomtató Nilox
- nyomtató Seiko
- nyomtató Argox
- nyomtató Royal Sovereign
- nyomtató Lexmark
- nyomtató Olivetti
- nyomtató Intermec
- nyomtató Minolta
- nyomtató DNP
- nyomtató Triumph-Adler
- nyomtató Oce
- nyomtató Paxar
- nyomtató Metapace
- nyomtató Ultimaker
- nyomtató Ibm
- nyomtató Toshiba TEC
- nyomtató Frama
- nyomtató Builder
- nyomtató Star Micronics
- nyomtató Dascom
- nyomtató HiTi
- nyomtató GG Image
- nyomtató Vupoint Solutions
- nyomtató Elite Screens
- nyomtató DTRONIC
- nyomtató Phoenix Contact
- nyomtató Videology
- nyomtató Star
- nyomtató EC Line
- nyomtató Colop
- nyomtató Approx
- nyomtató Fichero
- nyomtató Raspberry Pi
- nyomtató Middle Atlantic
- nyomtató IDP
- nyomtató Evolis
- nyomtató Nisca
- nyomtató Epson 7620
- nyomtató Sawgrass
Legújabb útmutatók nyomtató
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
2 Április 2025