Használati útmutató Nitecore NFF01

Nitecore Akkumulátor töltő NFF01

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Nitecore NFF01 (1 oldal) a Akkumulátor töltő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/1

NFF01

Magnetic Liquid Mixer

Features

• Intelligent magnetic liquid mixer

• Maximum speed of up to 1200 R.P.M.(Revolutions Per Minute)

• Temperature controlled within 70 ±5℃

• Utilizes high-graded ceramic heating unit

• The heating panel is made from SS304 stainless steel

• 2 modes selectable and 3 working periods programmable

• Intelligent memory function

• Anti-leakage design prevents accidental liquid spill

• Integrated digital temperature control function

•HousingmadefromreretardantPCmaterials

•CertiedbyRoHS,CE,FCCandCEC

Specication

Input: DC12V3AMAX(apoweradapterincluded)

Motor: 70-1200 R.P.M. (displayed on the screen)

Motor output: 3W

Heat output: 30W

Heatingtemperature: SurfaceCenter70°CMAX

Temperature control: Digital temperature control

Controlprecision: 5℃ ℉/10

Heatsource: Ceramic

Panel material: SS304 stainless steel

Mixing capacity: 30-1000ML (30-200ML recommended)

Operating duration: SMM default mode: continuous

PMM programmed mode: 14 days (maximum duration)

Size: 161mm×144.7mm×53mm ( )6.34” ×5.7” ×2.09”

Weight: 486.1g (17.15oz)

Accessories:

Poweradapter,2×stirbars,amagneticrod(usedfortakingoutthestirbar)

Operating Instructions:

1.Connectthepowerlinetotheexternaladapter;

2.PressthepowerswitchontherightsidetoturntheNFF01on,thescreenwilldisplay

R.P.M.(RevolutionsPerMinute),TEMP(Temperature),RUNTIME,TIMER(starttime

andendtime),REMAIN(remainingtime),SET1,SET2,SET3(AsNFF01hasmemory

function,whenitisrestarted,ifthepreviousmodeisPMM,SET1,SET2,SET3will

bedisplayedonthescreen.IfthepreciousmodeisSMMmode,thescreenwillnot

displaySET1,SET2,SET3);

3.Placeaatbasedvesselontheheatingpanel(Note:doNOTuseplasticvesselwhen

heating).Pourliquidintothevesselandputastirbarintothevessel;

4. Select the appropriate mixing mode and start working.

Mode Selection

SMM mode and PMM mode are available. Users can select the appropriate stirring mode

according to demands.

SMM mode:

Users can adjust speed (R.P.M.) and stirring temperature in SMM mode.

PMM mode:

InPMMmode,thereare3workingperiodsdividedfrom24hours:SET1/SET2/SET3.

NFF01willworkaccordingtotheprogrammedruntime.

• SET1workingperiod:00:00-07:59

• SET2workingperiod:08:00-15:59

• SET3workingperiod:16:00-23:59

InPMMmode,userscanadjustthestirringspeed(R.P.M.),temperature,programmed

runtime(1dayorlonger),starttime,endtimeandsystemtime.

WhenNFF01ison,iftheiconsofSET1,SET2,SET3arenotdisplayedonthescreen,

longpresstherotaryswitchtoentertheSMMmode;iftheiconsofSET1,SET2,SET3

aredisplayedonthescreen,longpresstherotaryswitchtoenterthePMMmode.Long

presstheSET1buttontoalternatemixingmodeandtaptherotaryswitchonceto

conrmandenterthemode.

Mode Setting

NFF01hasmemoryfunction.Aftermodeselection,NFF01automaticallyoperates

according to the previous settings.

SMM mode:

AfterenteringtheSMMmode,NFF01startsworking(iftheR.P.M.islow,ittakesalittle

longer to start) while the red heating indicator light above the rotary switch will lit and

emit a sound of “beep”.

Toadjustparameters,taptheset1buttononcetoheara“beep”,thenrotatetherotary

switch to select R.P.M. (adjustable range:70-1200 R.P.M.). Tap the rotary switch once

toconrmandselectthestirringtemperature(adjustablerange:35-70℃ ℉/90-150 ).

Finally,taptherotaryswitchoncetoconrmandstartworking.

SET 1 button

SET 2 button

SET 3 button

Rotary switch

Power switch

Heating indicator light

Heating panel

Thanks for purchasing NITECORE!

PMM mode:

TherearethreeseparateworkingperiodsclassiedasSET1/SET2/SET3.Afterentering

thePMMmode,NFF01willoperateaccordingtotheprevioussettingswhiletheprevious

parameters and system time will be displayed on the screen.

ParameterSettingofSET1/SET2/SET3:

1. SET1:taptheSET1buttononce,theSET1iconwillblinktoindicatethatparameters

areselectable.Rotatingtherotaryswitchtoadjustparameters,aftersettingone

parameter,taponcetomovetothenextparametertocyclethrough“R.P.M.-TEMP-

TIMER-RUNTIME”.UponthesettingcompletionofRUNTIME,taptherotaryswitch

oncetoexit,SET1iconwillnotblink.Tostopsetting,simplybytappingtheSET1

buttontoexitandthescreenwilldisplaySET1’sparameter.

2. SET2:taptheSET2buttononce,theSET2iconwillblinktoindicatethatparameters

are selectable. Setting method please refer to the above.

3. SET3:taptheSET3buttononce,theSET3iconwillblinktoindicatethatparameters

are selectable. Setting method please refer to the above.

Afterthecompletionofruntime,NFF01willnotifyuserthattheprogrammedperiodis

over by beeping repeatedly.

Pause: AfterthestartofNFF01,taptherotaryswitchoncetopauseandentertheheat

preservationstatus,whiletheredheatingindicatorwillnotturno.Tocontinue,simply

tap the rotary switch once again.

System Time Setting

To adjust the system time in PMM mode by long pressing the rotary switch until a “beep”

is heard. Rotating the rotary switch to modify time and tapping the rotary switch once

toconrmthesetting.

Temperature Protection Function

NFF01hastemperatureprotectionfunction,whenthewholetemperatureofthe

operating panel is over 70℃,NFF01willceaseheatinguntilthetemperaturehasbeen

decreased.

NFF01cannotprovideheatingonlywithoutstirring.IfusersadjusttheR.P.M.to0in

anymixingmode,NFF01willceasebothofstirringandheating.Inthistime,stirring

temperature is not allow to be set.

Precautions

1. Duringoperating,donotplaceanyotheritemsontheNFF01exceptfortheheating

vessel.

2. ThesafeenvironmentaltemperaturefortheNFF01isbetween-10~40°C,andthe

safestoragetemperatureis-20~60°C.

3. Donotoperateorstoreitindamparea.Keepalltheinammablevolatilesubstances

away from operating area.

4. TheNFF01isforuseofadultsabove18yearsold.Whileitisworking,keepitoutof

reach of children to avoid accidents.

5. Duringoperating,theworkingpanelistheheatingarea,donottouchtheworking

panel to avoid being scalded.

6. Whenheating,donotuseplasticvesseltoavoidaccidentsanddamageofthe

vessel.

7. Pleaseuseatbasedvesseltostirandheat,whichmakesitmoreecientto

transfer heat energy and avoid the impact between the stir bar and vessel.

8. Whenthemagneticstirbarisbouncing,setthespeed(R.P.M)lowerandproceedto

stirring.

9. Duringoperating,donotuseorplaceanydevicesthataresensitivetomagnetism

nearbytoavoidinuence.

10.Ifthereisanymalfunction,pleasestopusingimmediatelyandreadtheusermanual

carefully.

11.Disassembling,assemblingormodicationmaynullifythewarranty.Checkthe

warranty details.

Warranty Details

Our authorized dealers and distributors are responsible for warranty service. Should

anyproblemcoveredunderwarrantyoccurs,customerscancontacttheirdealersor

distributorsinregardstotheirwarrantyclaims,aslongastheproductwaspurchased

fromanauthorizeddealerordistributor.NITECORE’sWarrantyisprovidedonlyfor

productspurchasedfromanauthorizedsource.ThisappliestoallNITECOREproducts.

Any DOA / defective product can be exchanged for a replacement through a local

distributor/dealerwithinthe15daysofpurchase.After15days,alldefective/

malfunctioningNITECORE

® products can be repaired free of charge for a period of

12months(1year)fromthedateofpurchase.Beyond12months(1year),alimited

warrantyapplies,coveringthecostoflaborandmaintenance,butnotthecostof

accessories or replacement parts.

1. Thewarrantyisnulliediftheproduct(s)is/arebrokendown,reconstructedand/or

modiedbyunauthorizedparties

2. Damaged from wrong operations

ForthelatestinformationonNITECORE®productsandservices,pleasecontactalocal

NITECORE® distributor or send an email to service@nitecore.com

※Allimages,textandstatementsspeciedhereinthisusermanualareforreference

purpose only. Should any discrepancy occurs between this manual and information

speciedonwww.nitecore.com,informationonourocialwebsiteshallprevail.

SYSMAXInnovationsCo.,Ltd.reservestherightstointerpretandamendthecontent

of this document at any time without prior notice.

Pleasendusonfacebook:nitecorecharger

SYSMAX Innovations Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: info@nitecore.com

Web: www.nitecore.com

Address： Rm2601-06,CentralTower,No.5XiancunRoad,TianheDistrict,

 Guangzhou,510623,Guangdong,China NFF10070120

Termékspecifikációk

Márka:	Nitecore
Kategória:	Akkumulátor töltő
Modell:	NFF01

Szüksége van segítségre?

Ha segítségre van szüksége Nitecore NFF01, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Akkumulátor töltő Nitecore

Nitecore UHX1 PRO Útmutató

12 Január 2025

Nitecore EMR05 TAC Útmutató

11 Január 2025

Nitecore Intellicharger i2 Útmutató

30 December 2025

Nitecore FSP30 Útmutató

17 December 2024

Nitecore NES2000 Útmutató

17 December 2024

Nitecore FSP100 Útmutató

17 December 2024

Nitecore NC10000 Útmutató

17 December 2024

Nitecore NES500 Útmutató

17 December 2024

Nitecore NPS400 Útmutató

17 December 2024

Nitecore NPB1 Útmutató

17 December 2024

Útmutatók Akkumulátor töltő

Legújabb útmutatók Akkumulátor töltő

Schwaiger LAD230 531 Útmutató

9 Április 2025

Schwaiger 658699 Útmutató

9 Április 2025

Schwaiger LAD440 532 Útmutató

9 Április 2025

Ergotron 97-939 Útmutató

3 Április 2025

Ergotron YES35 Útmutató

3 Április 2025

Trust Maxo 25242 Útmutató

3 Április 2025

Ergotron LiFeKinnex Útmutató

3 Április 2025

Voltcraft PB-19C Útmutató

31 Március 2025

Watson 9V-2BC Útmutató

30 Március 2025

ISDT Q6 Lite Útmutató

26 Március 2025