Használati útmutató Nissan Versa (2007)
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Nissan Versa (2007) (49 oldal) a autó kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/49
MT-1
MANUAL TRANSAXLE
C TRANSMISSION/TRANSAXLE
CONTENTS
D
E
F
G
H
I
J
K
L
M
SECTION MT A
B
MT
Revision: June 2006 2007 Versa
PRECAUTIONS .......................................................... 2
Precautions for Supplemental Restraint System
(SRS) “AIR BAG” and “SEAT BELT PRE-TEN-
SIONER” .................................................................. 2
Precautions .............................................................. 2
PREPARATION ........................................................... 3
Special Service Tools ............................................... 3
Commercial Service Tools ........................................ 4
NOISE, VIBRATION AND HARSHNESS (NVH)
TROUBLESHOOTING ................................................ 6
NVH Troubleshooting Chart ..................................... 6
DESCRIPTION ............................................................ 7
Cross-Sectional View ............................................... 7
TRIPLE-CONE SYNCHRONIZER ........................ 8
REVERSE GEAR NOISE PREVENTION FUNC-
TION (SYNCHRONIZING METHOD) ................... 8
M/T OIL ....................................................................... 9
Changing M/T Oil ..................................................... 9
DRAINING ............................................................. 9
FILLING ................................................................. 9
Checking M/T Oil ...................................................... 9
OIL LEAKAGE AND OIL LEVEL ........................... 9
SIDE OIL SEAL ........................................................ 10
Removal and Installation ........................................ 10
REMOVAL ........................................................... 10
INSTALLATION ................................................... 10
POSITION SWITCH ...................................................11
Checking .................................................................11
BACK-UP LAMP SWITCH ...................................11
PARK/NEUTRAL POSITION SWITCH ................11
CONTROL LINKAGE ............................................... 12
Components of Control Device and Cable ............. 12
Removal and Installation ........................................ 12
REMOVAL ........................................................... 12
INSTALLATION ................................................... 13
AIR BREATHER HOSE ............................................ 14
Removal and Installation ........................................ 14
COMPONENTS ................................................... 14
REMOVAL ........................................................... 14
INSTALLATION ................................................... 14
TRANSAXLE ASSEMBLY ........................................ 15
Removal and Installation ........................................ 15
COMPONENTS ................................................... 15
REMOVAL ........................................................... 15
INSTALLATION ................................................... 15
Disassembly and Assembly .................................... 17
COMPONENTS ................................................... 17
DISASSEMBLY ................................................... 23
ASSEMBLY ......................................................... 28
INPUT SHAFT AND GEARS .................................... 34
Disassembly and Assembly .................................... 34
GENERAL PRECAUTIONS ................................ 34
DISASSEMBLY ................................................... 34
INSPECTION AFTER DISASSEMBLY ................ 36
ASSEMBLY ......................................................... 37
MAINSHAFT AND GEARS ....................................... 38
Disassembly and Assembly .................................... 38
GENERAL PRECAUTIONS ................................ 38
DISASSEMBLY ................................................... 38
INSPECTION AFTER DISASSEMBLY ................ 39
ASSEMBLY ......................................................... 40
REVERSE IDLER SHAFT AND GEARS .................. 43
Disassembly and Assembly .................................... 43
DISASSEMBLY ................................................... 43
ASSEMBLY ......................................................... 44
FINAL DRIVE ............................................................ 45
Disassembly and Assembly .................................... 45
DISASSEMBLY ................................................... 45
INSPECTION AFTER DISASSEMBLY ................ 46
ASSEMBLY ......................................................... 46
SHIFT CONTROL ..................................................... 48
Inspection ............................................................... 48
SERVICE DATA AND SPECIFICATIONS (SDS) ...... 49
General Specifications ............................................ 49
MT-2
PRECAUTIONS
Revision: June 2006 2007 Versa
PRECAUTIONS PFP:00001
Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT
BELT PRE-TENSIONER” ECS00GLL
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
●To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
●Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
●Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Precautions UCS005LD
●If transaxle assembly is removed from the vehicle, always replace CSC (Concentric Slave Cylinder).
Installed CSC returns to the original position when removing transaxle assembly. Dust on clutch disc slid-
ing parts may damage CSC seal, and may cause clutch fluid leakage.
●Do not reuse transaxle oil.
●Drain, fill and check transaxle oil with the vehicle on level surface.
●During removal or installation, keep inside of transaxle clear of dust or dirt.
●Check for the correct installation orientation prior to removal or disassembly. If matching marks are
required, be certain they do not interfere with the function of the parts they are applied to.
●In principle, tighten bolts or nuts gradually in several steps working diagonally from inside to outside. If
tightening sequence is specified, follow it.
●Be careful not to damage the sliding surfaces and mating surfaces of parts.
PREPARATION
MT-3
D
E
F
G
H
I
J
K
L
M
A
B
MT
Revision: June 2006 2007 Versa
PREPARATION PFP:00002
Special Service Tools UC S00 655
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
(Kent-Moore No.)
Tool name
Description
KV381054S0
(J-34286)
Puller
Removing mainshaft front bearing outer race
KV38100200
( — )
Drift
●Installing mainshaft front bearing outer race
●Installing mainshaft rear bearing outer race
●Installing differential side bearing outer race
(clutch housing side)
a: 65 mm (2.56 in) dia.
b: 49 mm (1.93 in) dia.
ST33220000
( — )
Drift
Installing input shaft oil seal
a: 37 mm (1.46 in) dia.
b: 31 mm (1.22 in) dia.
c: 22 mm (0.87 in) dia.
ST33400001
(J-26082)
Drift
Installing differential side bearing outer race
(transaxle case side)
a: 60 mm (2.36 in) dia.
b: 47 mm (1.85 in) dia.
KV38100300
(J-25523)
Drift
Installing differential side oil seal
a: 54 mm (2.13 in) dia.
b: 46 mm (1.81 in) dia.
c: 32 mm (1.26 in) dia.
ST36720030
( — )
Drift
●Installing input shaft rear bearing
●Installing mainshaft front bearing inner race
a: 70 mm (2.76 in) dia.
b: 40 mm (1.57 in) dia.
c: 29 mm (1.14 in) dia.
ZZA0601D
ZZA1143D
ZZA1046D
ZZA0814D
ZZA1046D
ZZA0978D
Termékspecifikációk
| Márka: | Nissan |
| Kategória: | autó |
| Modell: | Versa (2007) |
Szüksége van segítségre?
Ha segítségre van szüksége Nissan Versa (2007), tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók autó Nissan
16 Október 2024
15 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024
13 Október 2024
13 Október 2024
8 Október 2024
5 Október 2024
3 Október 2024
Útmutatók autó
- autó Peugeot
- autó Pioneer
- autó Kia
- autó Renault
- autó Citroën
- autó Honda
- autó Opel
- autó Volvo
- autó Toyota
- autó BMW
- autó Hyundai
- autó Mercedes-Benz
- autó Jeep
- autó Suzuki
- autó Ford
- autó Mazda
- autó Chrysler
- autó Fiat
- autó Volkswagen
- autó DS
- autó Chevrolet
- autó Skoda
- autó Audi
- autó Subaru
- autó Mitsubishi
- autó Seat
- autó Lexus
- autó Genesis
- autó Mercury
- autó Lancia
- autó Alfa Romeo
- autó Smart
- autó Audio-Technica
- autó MG
- autó Tesla
- autó Mini
- autó Dacia
- autó Rover
- autó Acme
- autó Saturn
- autó Land Rover
- autó Jaguar
- autó Dodge
- autó Polaris
- autó Maserati
- autó Saab
- autó Porsche
- autó Acura
- autó Vauxhall
- autó Infiniti
- autó GMC
- autó Buick
- autó Cadillac
- autó Pontiac
- autó Polestar
- autó RAM
- autó Scion
- autó Tata
- autó GEM
- autó VDL
- autó Sharper Image
- autó Abarth
- autó Lincoln
- autó Mahindra
- autó Chery
- autó Lada
- autó Aston Martin
- autó McLaren
Legújabb útmutatók autó
10 Április 2025
7 Április 2025
26 Március 2025
25 Március 2025
18 Március 2025
16 Január 2025
15 Január 2025
14 Január 2025
14 Január 2025
13 Január 2025