Használati útmutató NEC MultiSync V521

NEC Monitor MultiSync V521

Olvassa el alább 📖 a magyar nyelvű használati útmutatót NEC MultiSync V521 (137 oldal) a Monitor kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/137
MultiSync V521
MultiSync V721
MultiSync V921
User’s Manual
UÏivatelská pfiíruãka
Bedienerhandbuch
Οδηγίες Χρήσης
Manual del usuario
Manuel Utilisateur
Manuale utente
Gebruikershandleiding
Podr´cznikytkowinka
Руководство пользователя
Kullan∂c∂ Klavuzu
00Cover_all.p65 01.11.2000, 11:48 Uhr1
FCC Information
1. Use the attached specified cables with the N0501/N0701/N9902
color monitor so as not to interfere with radio and television
reception.
(1) Please use the supplied power cable or equivalent to ensure
FCC compliance.
(2) Shielded captive type signal cable.
Use of other cables may cause interference with radio and
television reception.
2. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/
television technician for additional suggestions. The user may find the
following booklet, prepared by the Federal Communications Commission,
helpful: How to Identify and Resolve Radio-TV Interference Problems.
This booklet is available from the U.S. Government Printing Office,
Washington, D.C., 20402, Stock No. 004-000-00345-4.
00Cover_all.p65 03.11.2000, 14:39 Uhr2
English
âesky
Deutsch
Ελληνικά
Español
Français
Italiano
Nederlands
Polski
Русский
Türkçe
01b_XChapterOpener 01.11.2000, 11:48 Uhr1
01b_XChapterOpener 01.11.2000, 11:48 Uhr2
English-1
English
Declaration of the Manufacturer
We hereby certify that the colour monitors
MultiSync V521(N0501)
MultiSync V721(N0701)
MultiSync V921(N9902)
are in compliance with
Council Directive 73/23/EEC:
- EN 60950
Council Directive 89/336/EEC:
- EN 55022
- EN 61000-3-2
- EN 61000-3-3
- EN 50082-1
(IEC 801-2)
(IEC 801-3)
(IEC 801-4)
and marked with
NEC-Mitsubishi Electric Visual Systems Corporation
686-1, NISHIOI OI-MACHI
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN
01b_english 01.11.2000, 11:48 Uhr1
English-2
Safety Instruction
Caution:
When operating the MultiSync V521/V721/V921 with a 220-240V AC
power source in Europe except UK, use the power cord provided with the
monitor.
In UK, a BS approved power cord with moulded plug has a Black (five
Amps) fuse installed for use with this equipment. If a power cord is not
supplied with this equipment please contact your supplier.
When operating the MultiSync V521/V721/V921 with a 220-240V AC
power source in Australia, use the power cord provided with the monitor.
For all other cases, use a power cord that matches the AC voltage of the
power outlet and has been approved by and complies with the safety
standard of your particular country.
E SNERGY TAR® Product
As an ENERGY STAR Partner, NEC-Mitsubishi Electronics Display of
America Inc. has determined that this product meets the ENERGY STAR
guidelines for energy efficiency. The ENERGY STAR emblem does not
represent EPA endorsement of any product or service.
IBM is registered trademark of International Business Machines Corporation
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
ENERGY STAR is a U.S. registered mark.
NEC is a registered trademark of NEC Corporation.
All other trademarks or registered trademarks are property of their respective owners.
01b_english 01.11.2000, 11:48 Uhr2
English-3
English
Contents
V Series monitor box* should contain the following:
MultiSync V Series Monitor with tilt / swivel base MultiSync V521,
MultiSync V721 or MultiSync V921
Power cord
Captive Signal Cable
• ‘User s manual
• ‘CD-ROM includes complete User s Manual in PDF format and
Windows related files (Inf file and color profile). To see the complete
Users Manual, Acrobat Reader 4.0 must be installed on your PC.
* Remember to save your original box and packing material to transport
or ship the monitor.
01b_english 01.11.2000, 11:48 Uhr3
English-5
English
Quick Start
To attach the MultiSync V Series monitor to your
system, follow these instruction:
1. Turn off the power to your computer and MultiSync monitor.
2. If necessary, install the display card. For more information, refer to the
display card manual.
3. For the PC: Connect the 15-pin mini D-SUB of the captive signal
cable to the connector of the display card in your system (Figure A.1)
Tighten all screws.
For the Mac: Connect the Macintosh Cable Adapter (not included) to
the monitor connector on the Macintosh ( ). Attach theFigure B.1
15-pin mini D-SUB end of the captive signal cable to the Macintosh
cable adapter on the computer (Figure B.1). Tighten all screws.
4. Connect one end of the power cord to the MultiSync V Series monitor
and the other end to the power outlet (Figure C.1).
5. Turn on the monitor (Figure D.1) and the computer.
6. This completes the installation.
NOTE: If you have any problems, please refer to the
Troubleshooting section of this Users Manual.
Captive Signal Cable
15-pin-mini-D-SUB
Figure A.1
01b_english 01.11.2000, 11:48 Uhr5
English-6
Figure B.1
Figure C.1
Figure D.1
Computer Mac Adapter
(not included) 15-pin mini D-SUB
Captive Signal Cable
Power Outlet
Power cord
01b_english 01.11.2000, 11:48 Uhr6
English-7
English
Controls
OSM (On-screen Manager) control buttons on the
front of the monitor function as follows:
SELECT Enters and exits the OSM menu.
CONTROL-/+ Selects one of the controls and decreases or increases
the adjustment.
RESET Resets the highlighted control to the factory setting.
Press -/+ button at the same time for approximately
1 sec.
BRIGHTNESS: Adjusts the overall image and background
screen brightness.
CONTRAST: Adjusts the image brightness in relation to the
background. (Contrast control is also effective with “ ”-,+
button even though OSM window is not visible.)
R Red Color Control: Adjust the red contrast of the display.
G Green Color Control: Adjust the green contrast of the
display.
B Blue Color Control: Adjust the blue contrast of the display.
Horizontal: Moves the image horizontally left or right.
Vertical position: Moves the image vertically up or down.
Horizontal size: Decreases or increases the horizontal size
of the image.
Vertical size: Decreases or increases the vertical size of the
image.
The Geometry controls allow you to adjust the curvature or angle of the
sides of your display.
Pincushion/Barrel: Decreases or increases the curvature of
the sides either inward or outward.
Trapezoid: Decreases or increases the bottom of the screen
to be the same as the top.
01b_english 01.11.2000, 11:49 Uhr7
English-9
English
Recommended use
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE
NOTE THE FOLLOWING WHEN SETTING UP
AND USING THE MULTISYNC V SERIES
COLOUR MONITOR:
DO NOT OPEN THE MONITOR. There are no user serviceable parts
inside and opening or removing covers may expose you to dangerous
shock hazards or other risks. Refer all servicing to qualified service
personnel.
Use the monitor in a clean, dry area.
Do not spill any liquids into the cabinet or use your monitor near
water.
Do not insert objects of any kind into the cabinet slots, as the may
touch dangerous voltage points, which can be harmful or fatal or may
cause electric shock, fire or equipment failure.
Do not place any heavy objects on the power cord. Damage to the
cord may cause shock or fire.
Do not place this product on a sloping or unstable cart, stand or table,
as the monitor may fall, causing serious damage to the monitor.
Keep the monitor away from high capacity transformers, electric
monitors and other devices such as external speakers or fans, which
may create strong magnetic fields.
If possible, position the monitor so that it is facing the east to minimize
the effects of the earth s magnetic field.
Changing the direction of the monitor while it is powered on may
cause image discoloration. To correct this, turn the monitor off for
20 minutes before powering it back on.
To separate the equipment from the power source you have to
remove the plug from the inlet socket.
When operating the MultiSync V Series with it is AC 220-240V
worldwide power supply, use a power supply cord that matches the
power supply voltage of the AC power outlet being used. The power
supply cord you use must have been approved by and comply with
the safety standards of your country. (Type H05VV-F should be used
except in UK)
01b_english 01.11.2000, 11:49 Uhr9
English-10
In UK, use a BS-approved power cord with molded plug having a
black (5A) fuse installed for use with this monitor. If a power cord is
not supplied with this monitor, please contact you supplier.
Immediately unplug your monitor from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
When the power supply cord or plug is damaged.
If liquit has been spilled, or objects have fallen into the monitor.
If the monitor has been exposed to rain or water.
If the monitor has been dropped or the cabinet damaged.
If the monitor does not operate normally by following operating
instructions.
Allow adequate ventilation around the monitor so that
heat can properly dissipate. Do not block ventilated
openings or place them monitor near a radiator or
other heat sources. Do not put an thing on top of
monitor.
The power cable connector is the primary means of
detaching the system from the power supply. The
monitor should be installed close to a power outlet
which is easily accessible.
Handle with care when transporting. Save packaging
for transporting.
CORRECT PLACEMENT AND ADJUSTMENT OF
THE MONITOR CAN REDUCE EYE, SHOULDER
AND NECK FATIGUE. CHECK THE FOLLOWING
WHEN YOU POSITION THE MONITOR:
Caution
01b_english 01.11.2000, 11:49 Uhr10
English-12
01b_english 01.11.2000, 11:49 Uhr12
âesky-2
Bezpeãnostní pokyny
Upozornûní:
Pfii provozu monitoru MultiSync V521/V721/V921 v síti se stfiídav˘m napûtím
220-240V v Evropû kromû Spojeného království pouÏívejte napájecí ‰ÀÛru
dodávanou s monitorem.
Ve Spojeném království se smí pouÏívat k tomuto monitoru jen schválená
‰ÀÛra BS se zalitou zástrãkou a s ãernou pojistkou (5A). Není-li napájecí
‰ÀÛra souãástí zafiízení, spojte se s dodavatelem.
Pfii provozu monitoru MultiSync V521/V721/V921 v síti se stfiídav˘m napûtím
220-240V v Austrálii pouÏívejte napájecí ‰ÀÛru dodávanou s monitorem.
Ve v‰ech ostatních pfiípadech pouÏívejte napájecí ‰ÀÛru, která se shoduje se
stfiídav˘m napûtím zásuvky a která vyhovuje bezpeãnostním pfiedpisÛm
dané zemû.
Produkt ENERGY STAR®
Spoleãnost NEC-Mitsubishi Electronics Display of America Inc. jako partner
E S urãila, Ïe tento produkt splÀuje poÏadavky smûrnic E SNERGY TAR NERGY TAR
pro efektivní vyuÏití energie. Znak ENERGY STAR nepfiedstavuje podporu EPA
akéhokoli produktu nebo sluÏby.
IBM je registrovaná ochranná známka spoleãnosti International Business Machines Corporation
Apple a Macintosh jsou registrované ochranné známky spoleãnosti Apple Computer Inc.
Microsoft a Windows jsou registrované ochranné známky spoleãnosti Microsoft Corporation.
E SNERGY TAR je v USA registrovaná známka.
NEC je registrovaná ochranná známka spoleãnosti NEC Corporation.
V‰echny ostatní ochranné známky nebo registrované ochranné známky jsou majetkem
pfiíslu‰n˘ch vlastníkÛ.
02b_Czech 01.11.2000, 11:49 Uhr2
âesky-4
Pfiipevnûní a odstranûní
naklápûcího a otoãného
podstavce
Pfiipevnûní
Tento produkt zahrnuje monitor MultiSync a naklápûcí a otoãn˘ podstavec.
Pfiipevnûní naklápûcího a otoãného podstavce k monitoru MultiSync
proveìte podle níÏe uveden˘ch pokynÛ.
Zatlaãte v‰ech ‰est západek naklápûcího a otoãného podstavce do ‰esti
otvorÛ ve spodní ãásti monitoru MultiSync.
Pak naklápûcí a otoãn˘ podstavec nasuÀte.
Západka naklápûcího a otoãného podstavce zajistí spojení s monitorem.
Sejmutí
Pfii pfiepravû monitoru do opravny je tfieba naklápûcí a otoãn˘ podstavec
sejmout.
Západku monitoru MultiSync zatlaãte dolÛ a vysuÀte naklápûcí a otoãn˘
podstavec.
Z ãelní strany monitoru MultiSync posuÀte naklápûcí a otoãn˘ podstavec
smûrem dozadu.
VysuÀte naklápûcí a otoãn˘ podstavec z otvorÛ monitoru MultiSync.
02b_Czech 01.11.2000, 11:49 Uhr4
âesky-7
âesky
Ovládací prvky
Ovládací tlaãítka OSM (On-Screen Manager) na
pfiední stranû monitoru mají sledující funkce:
SELECT Otevfiení a zavfiení nabídky OSM.
CONTROL-/+ Volba jednoho z ovládacích prvkÛ a sniÏování nebo
zvy‰ování hodnot nastavení.
RESET Obnovení zv˘raznûného ovládacího prvku na nastavení od
v˘robce. Stisknûte asi na 1 vtefiinu zároveÀ tlaãítko - a +.
BRIGHTNESS (Jas): Nastavuje celkovou svûtlost a jas pozadí
obrazovky.
CONTRAST (Kontrast): Nastavuje jas obrazu vzhledem k
pozadí. (Kontrast lze tlaãítky „-, +“ upravit, i kdyÏ je nabídka
OSM skrytá.)
R Red Color Control (Nastavení ãervené barvy): Nastavení
kontrastu ãervené na displeji.
G Green Color Control (Nastavení zelené barvy): Nastavení
kontrastu zelené na displeji.
B Blue Color Control (Nastavení modré barvy): Nastavení
kontrastu modré na displeji.
Horizontal (Horizontální): Horizontální posunutí obrazu
(vlevonebo vpravo).
Vertical position (Vertikální poloha): Vertikální posunutí
obrazu (nahoru nebo dolÛ).
Horizontal size (Horizontální rozmûr): Zmen‰ení nebo
zvût‰ení horizontálního rozmûru obrazu.
Vertical size (Vertikální rozmûr): Zmen‰ení nebo zvût‰ení
vertikálního rozmûru obrazu.
Ovladaãe umoÏÀují nastavení zaoblení nebo zkosení boãníchGeometry
stran zobrazení.
Pincushion/Barrel (Podu‰kové nebo soudkové zkreslení):
Zmen‰uje nebo zvût‰uje zaoblení zobrazení smûrem dovnitfi
nebo ven.
Trapezoid (LichobûÏníkové zkreslení): Vyrovnává spod
ãást obrazovky podle její horní ãásti.
02b_Czech 01.11.2000, 11:49 Uhr7
âesky-9
âesky
Provozní pokyny
Bezpeãnostní opatfiení a údrÏba
PRO DOSAÎENÍ OPTIMÁLNÍ FUNKâNOSTI
BAREVNÉHO MONITORU MULTISYNC ¤ADY V,
POSTUPUJTE P¤I INSTALACI A NASTAVOVÁNÍ
PODLE NÁSLEDUJÍCÍCH POKYNÒ:
Uvnitfi monitoru nejsou Ïádné souãástky,MONITOR NEOTVÍREJTE.
které by si mohl uÏivatel sám opravit. Pfii otvírání nebo odstraÀování krytÛ
se vystavujete nebezpeãí úrazu elektrick˘m proudem a jin˘m rizikÛm.
Ve‰keré zásahy tohoto druhu pfienechte odborníkÛm.
Monitor pouÏívejte v ãistém a suchém prostfiedí.
Dbejte, aby se do monitoru nedostaly tekutiny a nepouÏívejte ho
vblízkosti vody.
Do mezer skfiínû nezasouvejte Ïádné pfiedmûty. Mohly by pfiijít do
kontaktu s body nebezpeãného napûtí, coÏ mÛÏe zpÛsobit úraz
elektrick˘m proudem, poÏár nebo selhání zafiízení.
Na napájecí ‰ÀÛru nepokládejte Ïádné tûÏké pfiedmûty. Po‰koze
izolace mÛÏe zpÛsobit úraz elektrick˘m proudem nebo poÏár.
Produkt neumísÈujte na ‰ikmé a nestabilní vozíky, stojany nebo stoly;
monitor se mÛÏe pádem váÏnû po‰kodit.
Monitor neumísÈujte do blízkosti vysokokapacitních transformátorÛ,
elektrick˘ch monitorÛ a podobn˘ch zafiízení, jako jsou exter
reproduktory nebo ventilátory, které vytváfií silné magnetické pole.
Umístûte monitor pokud moÏno obrazovkou k v˘chodu. Minimalizujete
tak pÛsobení zemského magnetického pole.
Otáãením zapnutého monitoruÏe dojít k rozladûní barev. Potom je
tfieba monitor alespoÀ na 20 minut vypnout a teprve po opûtném zapnutí
barvy znovu vyladit.
K pfieru‰ení pfiívodu elektrické energie je nutno odpojit kabel ze zásuvky
elektrického natí.
PouÏíváte-li pro provoz monitoru MultiSync fiady V obvyklé napûtí 220-
240V, pouÏijte také odpovídající napájecí ‰ÀÛru vyhovující napûtí zásuvky
stfiídavého proudu. Napájecí ‰ÀÛra musí b˘t schválena a musí vyhovovat
bezpeãnostním pfiedpisÛm platn˘m v pfiíslu‰né zemi. (Typ H05VV-F se
nesmí pouÏívat ve Spojeném království)
Ve Velké Británii se smí pouÏívat k tomuto monitoru jen schválená ‰ÀÛra
BS se zalitou zástrãkou a s ãernou pojistkou (5A). Není-li napájecí ‰ÀÛra
pfiibalena, spojte se prosím s dodavatelem.
02b_Czech 01.11.2000, 11:49 Uhr9

Termékspecifikációk

Márka: NEC
Kategória: Monitor
Modell: MultiSync V521

Szüksége van segítségre?

Ha segítségre van szüksége NEC MultiSync V521, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Monitor NEC

Útmutatók Monitor

Legújabb útmutatók Monitor