Használati útmutató Navilock NL-622MP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Navilock NL-622MP (10 oldal) a GPS készülék kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/10
NL-622MP
operation manual (61843)
1. Introduction
The NL-622MP is a serial GPS receiver with an internal antenna and a ublox6 GPS & GALILEO
SuperSense® GPS/Galileo chip set. The serial port enables the connection with a notebook,
UMPC, tablet PC or car PC. Thanks to its universal MD6 connector, it can be used on almost all
devices by means of an adapter cable. Adapter cables are available optionally.
1.1. Contents*
1x Navilock NL-622MP
1x set mounting material
(washer, circlip, nut)
1x 8cm CD ROM including operation manual
* Before using the device, please make sure that all the parts are included in the package. If any
parts are missing or damaged, please contact your dealer immediately.
Important health and safety information
When using this product, take the following precautions in order to avoid possible damages and legal consequences. Always
follow all safety and operation manuals exactly and keep them for future reference. Observe all warnings in the operation manual
and on the product. In order to avoid injuries, electrocution, fire and damages to the product, observe the following precautions:
ELECTRIC SECURITY
This product is designed for operation with power supply via the USB port. Any other operation mode can be dangerous and may
void the warranty claims for this product. This unit contains an internal back-up battery.
NOTE: RECYCLE OR DISPOSE OF USED BATTERIES OR RECHARGEABLE BATTERIES IN
ACCORDANCE WITH ALL APPLICABLE REGULATIONS AND THE INSTRUCTIONS
INCLUDED WITH THE PRODUCT.
PRECAUTIONS REGARDING DIRECT SUNLIGHT
Make sure the unit is not exposed to very high humidity and temperatures. Never leave the unit, the battery or the rechargeable
battery for an extended period in a vehicle or plate, where the temperature can increase to over 60°C (140°F), for example on the
dashboard of a car, the window sill or behind a pane of glass, which is directly exposed to the sun or very strong UV light.
Otherwise the unit or the vehicle may be damaged, and the battery or the rechargeable battery may overheat.
Damages requiring repairs
Disconnect the unit from the AC supply in the following cases; also disconnect the rechargeable battery and contact an
authorized repair man or your dealer.
Liquid or an object has entered the product.
The product has fallen down or was damaged.
There are visible signs of overheating.
• When operated normally, the product does not function flawlessly.
Avoid using the unit directly after strong temperature changes.
If the unit is exposed to strong temperature and humidity fluctuations, condensation can form in the unit. In order to avoid
damages to the unit, please wait until the condensation has dried off before using the unit.
NOTE: If you bring the unit from a cold to a warm environment, or vice versa, first let it get
accustomed to the new temperature before turning it on.
2. Installation
The NL-622MP is designed for mounting on a trunk lid, car roof or on a boat. For this purpose,
you must choose a mounting location, where the material is hard enough to absorb the pressure
applied to the receiver, without denting in. Otherwise the rubber gasket on the mounting surface
would not seal completely any more, and water might penetrate. The mounting examples shown
for various situations provide maximum reception, since it is not hindered by the vehicle (e.g. by
a window pane).
Do not carry out the mounting yourself, but rather let it be done by a specialist shop. If you carry
out the mounting yourself, you may void the warranty. Please ask your dealer to what extent the
personal mounting might influence the warranty and if it is necessary to have this work done by a
specialist in order to keep the warranty.
Navilock is not responsible for wrong mounting, because we recommend that this should be done
by a specialist. This is the reason we don’t offer any mounting instructions here. An experienced
car repair shop has the expertise necessary to carry out the mounting.
3. Starting operation, e.g. with an USB adapter cable (article number 61264)
3.1. Plug the USB cable into a free USB port on your notebook etc., and connect it with the
NL-622MP. The NL-622MP will be recognized by your Windows operating system, which will
attempt to install a driver. Abort this process, and start the driver installation of the USB cable
from the CD-ROM, or download the driver from the Navilock website. Follow the installation
instructions. After the installation is completed, re-start your computer. Then the GPS COM
port will be available in the Device Manager under Connections. Set this port in your
navigation or route planner software. Do not use another program which accesses this port at
the same time.

Termékspecifikációk

Márka: Navilock
Kategória: GPS készülék
Modell: NL-622MP

Szüksége van segítségre?

Ha segítségre van szüksége Navilock NL-622MP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók GPS készülék Navilock

Útmutatók GPS készülék

Legújabb útmutatók GPS készülék