Használati útmutató Moxa MiiNePort E3-T

Moxa nincs kategorizálva MiiNePort E3-T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Moxa MiiNePort E3-T (156 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/156
MiiNePort E2/E3 User’s Manual
Seventh Edition, February 5 201
www.moxa.com/product
© 2015 Moxa Inc. All rights reserved.
Reproduction without permission is prohibited.
MiiNePort E2/E3 User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
Copyright © 2015 Moxa Inc.
All rights reserved.
Reproduction without permission is prohibited.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas
Toll-free: 1-888-669-2872
Tel: - -528-6777 +1 714
Fax: - -528-6778+1 714
Moxa China (Shanghai office)
Toll-free: 800-820-5036
Tel: +86- -5258-9955 21
Fax: +86- -5258-550521
Moxa Europe
Tel: +49- -3 70 03 99-0 89
Fax: +49- -3 70 03 99-89 99
Moxa Asia-Pacific
Tel: +886-2-8919-1230
Fax: +886-2-8919-1231
Table of Contents
1. Introduction ...................................................................................................................................... 1-1
Overview ........................................................................................................................................... 1-2
Package Checklist ............................................................................................................................... 1-2
Product Features ................................................................................................................................ 1-3
Product Specifications ......................................................................................................................... 1-5
Module Dimensions ............................................................................................................................. 1-7
Panel Layout and Pin Assignments ........................................................................................................ 1-9
Evaluation Board Layout ............................................................................................................... 1-9
Pin Assignments ........................................................................................................................ 1-10
LED Indicators .................................................................................................................................. 1-13
2. Getting Started 2-1..................................................................................................................................
Wiring Precautions .............................................................................................................................. 2-2
Installing the MiiNePort module onto the MiiNePort Evaluation Board 2-2.........................................................
Selecting the Serial Interface ............................................................................................................... 2-3
Connecting the Power 2-3.........................................................................................................................
Connecting to the Network ................................................................................................................... 2-3
Connecting to a Serial Device ............................................................................................................... 2-4
Digital I/O Channel Settings ................................................................................................................. 2-4
Schematic Design Guide ...................................................................................................................... 2-4
3. Choosing the Proper Operation Mode ................................................................................................ 3-1
Overview ........................................................................................................................................... 3-2
Real COM Mode .................................................................................................................................. 3-2
TCP Server Mode ................................................................................................................................ 3-2
TCP Client Mode ................................................................................................................................. 3-3
RFC2217 Mode ................................................................................................................................... 3-4
UDP Mode .......................................................................................................................................... 3-4
Ethernet Modem Mode ......................................................................................................................... 3-5
MCSC Mode (MiiNePort E2 Only) ........................................................................................................... 3-5
4. Choosing the Configuration Tool ....................................................................................................... 4-1
Utility Console .................................................................................................................................... 4-2
Web Console ...................................................................................................................................... 4-2
Telnet Console 4-3...................................................................................................................................
SCM (Serial Command Mode) ............................................................................................................... 4-3
5. Initial IP Address Configuration ........................................................................................................ 5-1
Static vs. Dynamic IP Address .............................................................................................................. 5-2
Factory Default IP Address ................................................................................................................... 5-2
ARP 5-2...................................................................................................................................................
Telnet Console 5-3...................................................................................................................................
6. Utility Console and Driver Installation .............................................................................................. 6-1
NPort Search Utility ............................................................................................................................. 6-2
Installing NPort Search Utility ....................................................................................................... 6-2
NPort Search Utility Configuration . 6-3................................................................................................
NPort Windows Driver Manager ............................................................................................................ 6-4
Installing NPort Windows Driver Manager ....................................................................................... 6-4
Using NPort Windows Driver Manager ............................................................................................ 6-6
The Linux Real TTY Driver .................................................................................................................... 6-8
Mapping TTY Ports ....................................................................................................................... 6-8
Removing Mapped TTY Ports ......................................................................................................... 6-9
Removing Linux Driver Files .......................................................................................................... 6-9
The UNIX Fixed TTY Driver ................................................................................................................. 6-10
Installing the UNIX Driver 6-........................................................................................................... 10
Configuring the UNIX Driver ....................................................................................................... 6-10
7. Web Console Configuration ............................................................................................................... 7-1
Opening Your Brower .......................................................................................................................... 7-2
Web Console Fundamentals ................................................................................................................. 7-3
Basic Settings .................................................................................................................................... 7-3
Network Settings ......................................................................................................................... 7-3
What is IPv6? 7-5.............................................................................................................................
Serial Port Settings ...................................................................................................................... 7-6
Operation Modes ......................................................................................................................... 7-8
Advanced Settings ............................................................................................................................ 7-27
Accessible IP List ....................................................................................................................... 7-27
SNMP Agent 7-.............................................................................................................................. 27
DIO Settings ............................................................................................................................. 7-28
Serial Command Mode (SCM) 7-..................................................................................................... 29
Miscellaneous ........................................................................................................................... 7-30
Maintenance 7-.................................................................................................................................... 31
Console Settings ....................................................................................................................... 7-31
Firmware Upgrade ..................................................................................................................... 7-31
Configuration Tools .................................................................................................................... 7-32
Change Password ...................................................................................................................... 7-33
8. NetEZ Technologies ........................................................................................................................... 8-1
EZPower ............................................................................................................................................ 8-2
SCM (Serial Command Mode) ............................................................................................................... 8-2
AutoCFG (Auto Configuration) .............................................................................................................. 8-3
MCSC (Multiple Channel Serial Communication) ...................................................................................... 8-4
Command Packets ....................................................................................................................... 8-6
SCM (Serial Command Mode) under MCSC ..................................................................................... 8-8
EZPage .............................................................................................................................................. 8-8
How to Clean up EZPage in MiiNePort ........................................................................................... 8-11
A. Introduction to SCM (Serial Command Mode) Command Set ............................................................. A-1
Command/Reply Format ...................................................................................................................... A-2
Command Code for Getting the Configuration ......................................................................................... A-3
Command Code for Setting the Configuration ....................................................................................... A-19
Command Code for Retrieving Running Configuration ............................................................................ A-34
Command Code for Viewing the Status ................................................................................................ A-51
Control Command Code ..................................................................................................................... A-52
B. Well Known Port Numbers ................................................................................................................ B-1
C. Auto IP Report Protocol .................................................................................................................... C-1
IP Address Report Structure ................................................................................................................. C-1
Example ............................................................................................................................................ C-2
D. DIO Commands ................................................................................................................................. D-1
Overview .......................................................................................................................................... D-2
C Code Example ................................................................................................................................ D-2
Read Single DIO ................................................................................................................................ D-2
Command . D-2................................................................................................................................
Response .................................................................................................................................. D-3
C Code Example ......................................................................................................................... D-3
Write Single DIO ................................................................................................................................ D-3
Command . D-3................................................................................................................................
Response .................................................................................................................................. D-4
C Code Example ......................................................................................................................... D-4
Read Multiple DIOs ............................................................................................................................ D-4
Command . D-4................................................................................................................................
Response .................................................................................................................................. D-5
C Code Example ......................................................................................................................... D-5
Write Multiple DIOs ............................................................................................................................ D-6
Command . D-6................................................................................................................................
Response .................................................................................................................................. D-6
C Code Example ......................................................................................................................... D-7
E. SNMP Agent with MIB II and RS-232 Like Groups ............................................................................. E-1
F. NECI Library ...................................................................................................................................... F-1
1
1. Introduction
The MiiNePort Series embedded device servers are compact drop-in modules that can be integrated with your
serial devices to enable connectivity to an Ethernet network. All MiiNePort Series modules come equipped with
built-in TCP/IP protocols and other easy- -use network enabling tools for fast integration, allowing you to to
provide network access to any electronic device that has a serial port.
The following topics are covered in this chapter:
Overview
Package Checklist
Product Features
Product Specifications
Module Dimensions
Panel Layout and Pin Assignments
Evaluation Board Layout
Pin Assignments
LED Indicators
MiiNePort E2/E3 Introduction
1-2
Overview
Moxa’s MiiNePort E2/E3 embedded device servers are designed for manufacturers who want to add
sophisticated network connectivity to their serial devices, but with minimal integration effort. The MiiNePort
E2/E3 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet and
up to 921.6 Kbps serial baudrate. The MiiNePort E2/E3 comes with a versatile selection of ready- -use to
operation modes, and requires only a small amount of power. By using Moxa’s innovative NetEZ technology,
the MiiNePort E2/E3 can be used to convert any device that has a standard serial interface to an Ethernet
enabled device in no time. In addition, compared with other products of this type, the MiiNePort E2/E3 has a
very compact size, making it easy to fit the MiiNePort E2/E3 into virtually any existing serial device.
Package Checklist
MiiNePort E2 Module Package (one of the following)
• MiiNePort E2: 0 to 55°C operating temp., 50 bps to 230.4 Kbps baudrate
• MiiNePort E2-H: 0 to 55°C operating temp., 50 bps to 921.6 Kbps baudrate
• MiiNePort E2-T: -40 to 85°C operating temp., 50 bps to 230.4 Kbps baudrate
• MiiNePort E2-H-T: -40 to 85°C operating temp., 50 bps to 921.6 Kbps baudrate
MiiNePort E2 Starter Kit Package
• MiiNePort E2 module (MiiNePort E2 or MiiNePort E2-H only)
• MiiNePort E2 evaluation board
• Universal power adaptor
• 2 power cords
• Null modem serial cable
• Cross-over Ethernet cable
• Document and Software CD
• Quick Installation Guide
• Warranty Card
MiiNePort E3 Module Package (one of the following)
• MiiNePort E3: 0 to 55°C operating temp., 50 bps to 230.4 Kbps baudrate
• MiiNePort E3-H: 0 to 55°C operating temp., 50 bps to 921.6 Kbps baudrate
• MiiNePort E3-T: -40 to 85°C operating temp., 50 bps to 230.4 Kbps baudrate
• MiiNePort E3-H-T: -40 to 85°C operating temp., 50 bps to 921.6 Kbps baudrate
MiiNePort E3 Starter Kit Package
• MiiNePort E3 module (MiiNePort E3 or MiiNePort E3-H only)
• MiiNePort E3 evaluation board
• Universal power adaptor
• 2 power cords
• Null modem serial cable
• Cross-over Ethernet cable
• 2 flat cables
• 1 screw and spacer pack
• Document and Software CD
• Quick Installation Guide
• Warranty Card
NOTE: Please notify your sales representative if any of the above items is missing or damaged.
MiiNePort E2/E3 Introduction
1-5
MCSC (Multiple Channel Serial Communication) provides dual connections and dual channels so your
device can act as a server and client at the same time.
Product Specifications
Form Factor
Type:
MiiNePort E2: Drop-in module
MiiNePort E3: Pin header
Dimensions:
MiiNePort E2: 29 x 17 x 12.6 mm (1.14 x 0.67 x 0.50 in)
MiiNePort E3: 35 x 52.5 x 18 mm (1.37 x 2.07 x 0.71 in)
Weight:
MiiNePort E2: 5 g
MiiNePort E3: 12 g
System Information
CPU: -bit ARM Core32
RAM: 4 MB built in
Flash: 2 MB built in
Ethernet Interface
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Serial Interface
Number of Ports: 1
Transmission Format: Standard TTL
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, DTR/DSR, XON/XOFF
Baudrate:
MiiNePort E2/E3: 50 bps to 230.4 Kbps (suports non-standard baudrates)
MiiNePort E2-H/E3-H: 50 bps to 921.6 Kbps (supports non-standard baudrates)
MiiNePort E2/E3 Introduction
1-7
Module Dimensions
MiiNePort E2
units: mm (in)
MiiNePort E2/E3 Introduction
1-8
MiiNePort E3
units: mm (in)
MiiNePort E2/E3 Introduction
1-10
Pin Assignments
MiiNePort E2 Module Pin Assignment
Bottom Panel of the MiiNePort E2 Module
JP1
Pin
Signal Name
Function
1
Ethernet Tx+
Ethernet Transmit Data+
2
Ethernet Tx-
Ethernet Transmit Data-
3
Ethernet Rx+
Ethernet Receive Data+
4
Ethernet Rx-
Ethernet Receive Data-
JP2
Pin
Signal Name
Function
1
100M LED
Ethernet 100M LED
2
10M LED
Ethernet 10M LED
3
LRXD
Receive Serial Data
4
LTXD
Transmit Serial Data
5
LDCD
Data Carrier Detect
6
RS485_EN
RS-485 Enable
7
LRTS
Request To Send
8
LDTR
Data Terminal Ready
9
LDSR
Data Set Ready
10
LCTS
Clear To Send
JP3
Pin
Signal Name
Function
1
DIO0
Programmable Input/Output
2
DIO2
Programmable Input/Output
3
DIO3
Programmable Input/Output
4
DIO1
Programmable Input/Output
5
Reserved
N/A
6
Reserved
N/A
7
SW Reset
Reset To Factory Default
8
GND
Circuit Ground
9
Ready LED
System is Ready LED
10
VCC
Power Supply
MiiNePort E2/E3 Introduction
1-11
MiiNePort E3 Module Pin Assignment
Ethernet Pins (JP2)
Pin
Signal Name
Function
1
Reserve
N/A
2
Reserve
N/A
3
Reserve
N/A
4
Reserve
N/A
5
PoE signal pair 1
PoE power from Tx signal
6
PoE spare pair 1
PoE power from RJ45 4, 5 pin
7
PoE signal pair 2
PoE power from Rx signal
8
PoE spare pair 2
PoE power from RJ45 7, 8 pin
Serial Pins and Power Pins (JP4)
Pin
Signal Name
Function
1
Serial Rx
Receive Serial Data
2
Ready LED
System to Ready LED
3
Serial Tx
Transmit Serial Data
4
GPIO
Programmable I/O
5
DCD
Receive Line Signal Detector
6
GPIO
Programmable I/O
7
RS485_EN0
RS-485 Enabled
8
GPIO
Programmable I/O
9
RTS
Request to Send
10
GPIO
Programmable I/O
11
DTR
Data Terminal Ready
12
Reserve
N/A
13
DSR
Data Set Ready
14
Reserve
N/A
15
CTS
Clear to Send
16
SW_Reset
Reset to Factory Default
17
Reserve
N/A
18
Reserve
N/A
19
GND
Circuit Ground
20
VCC
Power Supply
MiiNePort E2/E3 Introduction
1-12
Evaluation Board Ethernet Port Pin Assignment
RJ45
Pin
Signal
1
Tx+
2
Tx-
3
Rx+
6
Rx-
Evaluation Board Serial Port Pin Assignment
DB9 Male
Pin
RS-232
RS-485- 2W
1
DCD
–
2
RxD
–
3
TxD
D+
4
DTR
D-
5
GND
GND
6
DSR
–
7
RTS
–
8
CTS
–
9
–
–

Termékspecifikációk

Márka: Moxa
Kategória: nincs kategorizálva
Modell: MiiNePort E3-T

Szüksége van segítségre?

Ha segítségre van szüksége Moxa MiiNePort E3-T, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Moxa

Moxa

Moxa UPort 1450I Útmutató

1 Április 2025
Moxa

Moxa OnCell 5104-HSDPA Útmutató

12 Január 2025
Moxa

Moxa OnCell G3150 Útmutató

21 Augusztus 2024
Moxa

Moxa ioLogik R1241 Útmutató

21 Augusztus 2024
Moxa

Moxa 4101-MB-PBS Útmutató

21 Augusztus 2024
Moxa

Moxa MGate EIP3270 Útmutató

21 Augusztus 2024
Moxa

Moxa M-3411 Útmutató

21 Augusztus 2024
Moxa

Moxa M-1600 Útmutató

21 Augusztus 2024
Moxa

Moxa TCC-80-RP Útmutató

21 Augusztus 2024
Moxa

Moxa ioLogik R1241-T Útmutató

21 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025