Használati útmutató Milwaukee M18 Fuel 2861-22

Milwaukee Csavaros gép M18 Fuel 2861-22

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milwaukee M18 Fuel 2861-22 (16 oldal) a Csavaros gép kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/16
Cat. No. / No de cat.
2852-20, 2860-20, 2861-20
M18™ FUEL™ MID-TORQUE IMPACT WRENCHES
CLÉS À CHOCS À COUPLE MOYEN M18™ FUEL™
LLAVES DE IMPACTO DE MEDIO TORQUE M18™ FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging im-
properly or at temperatures outside the specied range
may damage the battery and increase the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator
an electric shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use only sockets and other accessories spe-
cically designed for use on impact wrenches
and drivers. Other sockets and accessories might
shatter or break causing injury.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
•
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SPECIFICATIONS Volts 18 DC..............................................................
Battery Type .................................................M18™
Charger Type M18™................................................
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Cat. No. 2852-20
.....................................................
Anvil Type ...................................3/8" Square-Ring
Mode 1
No Load RPM ......................................... 0 - 575
Impacts per Minute .......................................450
Mode 2
No Load RPM ....................................... 0 - 2000
Impacts per Minute .....................................2900
Mode 3
No Load RPM ....................................... 0 - 2300
Impacts per Minute .....................................3200
Cat. No. 2860-20
.....................................................
Anvil Type ..................................... 1/2" Square-Pin
Mode 1
No Load RPM ....................................... 0 - 1700
Impacts per Minute .....................................2300
Mode 2
No Load RPM ....................................... 0 - 2100
Impacts per Minute .....................................2700
Mode 3
No Load RPM ....................................... 0 - 2400
Impacts per Minute .....................................3000
Cat. No. 2861-20
.....................................................
Anvil Type ...................................1/2" Square-Ring
Mode 1
No Load RPM ......................................... 0 - 510
Impacts per Minute .......................................420
Mode 2
No Load RPM ....................................... 0 - 2100
Impacts per Minute .....................................2700
Mode 3
No Load RPM ....................................... 0 - 2400
Impacts per Minute .....................................3000
FUNCTIONAL DESCRIPTION
1. 1/2" Square drive anvil with pin (2860-20)
2. LED
3. Control switch
4. Trigger
5. 3-Mode drive control
6 Belt clip.
7. 1/2" Square drive anvil with ring (2861-20)
8. 3/8" Square drive anvil with ring (2852-20)
1
2
45
3
7
6
8

Termékspecifikációk

Márka: Milwaukee
Kategória: Csavaros gép
Modell: M18 Fuel 2861-22

Szüksége van segítségre?

Ha segítségre van szüksége Milwaukee M18 Fuel 2861-22, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Csavaros gép Milwaukee

Milwaukee

Milwaukee M18 BDD Útmutató

30 December 2025
Milwaukee

Milwaukee M12 BDD Útmutató

30 December 2025
Milwaukee

Milwaukee 2769-20 Útmutató

7 Október 2024
Milwaukee

Milwaukee M12 Fuel 2454-22 Útmutató

4 Október 2024
Milwaukee

Milwaukee 2455-20 Útmutató

27 Szeptember 2024
Milwaukee

Milwaukee 48-22-2106 Útmutató

23 Szeptember 2024
Milwaukee

Milwaukee 2759-20 Útmutató

21 Szeptember 2024
Milwaukee

Milwaukee 2868-20 Útmutató

20 Szeptember 2024
Milwaukee

Milwaukee M18 Fuel One-Key 2857-22CT Útmutató

18 Szeptember 2024
Milwaukee

Milwaukee M18 Fuel 2855-22 Útmutató

18 Szeptember 2024

Útmutatók Csavaros gép

Legújabb útmutatók Csavaros gép

Metabo

Metabo SE 2800 Útmutató

13 Január 2025
RYOBI

RYOBI One+ R18IW3 Útmutató

12 Január 2025
Hazet

Hazet 9012EL-SPC Útmutató

12 Január 2025
MSW

MSW -ACW700 Útmutató

11 Január 2025
RYOBI

RYOBI PCL250 Útmutató

5 Január 2025
RYOBI

RYOBI PCL212 Útmutató

5 Január 2025
Hazet

Hazet 9022 P-2 Útmutató

31 December 2025
Netter Vibration

Netter Vibration PKL 740 Útmutató

29 December 2024
Alpha Tools

Alpha Tools AS 12 A Útmutató

29 December 2024
Total

Total TAT40342 Útmutató

17 December 2024