Használati útmutató Milwaukee M18 Fuel 2755B-22
Milwaukee
Csavaros gép
M18 Fuel 2755B-22
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milwaukee M18 Fuel 2755B-22 (16 oldal) a Csavaros gép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/16

Cat. No. / No de cat.
2753-20, 2754-20, 2755-20, 2755B-20
M18 FUEL™ 1/4" HEX IMPACT DRIVER, 3/8" COMPACT IMPACT
WRENCH & 1/2" COMPACT IMPACT WRENCHES
TOURNEVIS À PERCUSSION HEXAGONAL DE 6 mm (1/4")
M18 FUEL™, CLÉ À CHOCS COMPACTE DE 3/8" M18 FUEL™,
ET CLÉS À CHOCS COMPACTE DE 1/2" M18 FUEL™
DESTORNILLADOR DE IMPACTO HEXAGONAL M18 FUEL™
DE 6 mm (1/4"), LLAVE DE IMPACTO COMPACTA M18 FUEL™
DE 3/8", LLAVE DE IMPACTO COMPACTA M18 FUEL™ DE 1/2"
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

3
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
IMPACT WRENCHES AND DRIVERS
• Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the
operator an electric shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use only sockets and other accessories spe-
cically designed for use on impact wrenches
and drivers. Other sockets and accessories might
shatter or break causing injury.
•
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
C US
UL Listing for Canada and U.S.
SPECIFICATIONS
Volts 18 DC..............................................................
Battery Type .................................................M18™
Charger Type M18™................................................
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Cat. No. 2753-20
.....................................................
RPM ............................................................0 - 3000
IPM .............................................................0 - 3700
Cat. No. 2754-20, 2755-20, 2755B-20
....................
RPM ............................................................0 - 2500
IPM .............................................................0 - 3200
FUNCTIONAL DESCRIPTION
1. 1/4" Hex drive chuck
(2753-20)
2. LED
3. Control switch
4. Trigger
5. Handle
6. Speed control
7. Belt clip
8. 3/8" Square drive anvil (2754-20)
9. 1/2" Square drive anvil (2755B-20)
10.1/2" Square drive anvil with pin detent (2755-20)
1
2
4
3
8
9
Cat. No. 2753-20
Cat. No.
2754-20
Cat. No.
2755B-20
10
Cat. No.
2755-20
7
5
6
Termékspecifikációk
Márka: | Milwaukee |
Kategória: | Csavaros gép |
Modell: | M18 Fuel 2755B-22 |
Szüksége van segítségre?
Ha segítségre van szüksége Milwaukee M18 Fuel 2755B-22, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Csavaros gép Milwaukee

30 December 2025

30 December 2025

7 Október 2024

4 Október 2024

27 Szeptember 2024

23 Szeptember 2024

21 Szeptember 2024

20 Szeptember 2024

18 Szeptember 2024

18 Szeptember 2024
Útmutatók Csavaros gép
- Csavaros gép Parkside
- Csavaros gép Worx
- Csavaros gép Bosch
- Csavaros gép Panasonic
- Csavaros gép AEG
- Csavaros gép Einhell
- Csavaros gép Ozito
- Csavaros gép Makita
- Csavaros gép Emos
- Csavaros gép Omega
- Csavaros gép Mafell
- Csavaros gép Genesis
- Csavaros gép Güde
- Csavaros gép Hitachi
- Csavaros gép Toolcraft
- Csavaros gép Hilti
- Csavaros gép Black & Decker
- Csavaros gép Kawasaki
- Csavaros gép Fieldmann
- Csavaros gép PowerPlus
- Csavaros gép Metabo
- Csavaros gép Powerfix
- Csavaros gép Biltema
- Csavaros gép BaseTech
- Csavaros gép Chamberlain
- Csavaros gép RYOBI
- Csavaros gép Beta
- Csavaros gép HiKOKI
- Csavaros gép Festool
- Csavaros gép Greenworks
- Csavaros gép Yato
- Csavaros gép Velleman
- Csavaros gép Trotec
- Csavaros gép Bavaria By Einhell
- Csavaros gép Porter-Cable
- Csavaros gép DeWalt
- Csavaros gép Wiha
- Csavaros gép Stanley
- Csavaros gép Silverline
- Csavaros gép Vonroc
- Csavaros gép Cotech
- Csavaros gép TAURUS Titanium
- Csavaros gép Alpha Tools
- Csavaros gép Fein
- Csavaros gép Cleco
- Csavaros gép Weidmüller
- Csavaros gép EasyMaxx
- Csavaros gép Cocraft
- Csavaros gép Craftsman
- Csavaros gép Laserliner
- Csavaros gép Hazet
- Csavaros gép Toolland
- Csavaros gép Ferm
- Csavaros gép Skil
- Csavaros gép Meec Tools
- Csavaros gép Dremel
- Csavaros gép Tacklife
- Csavaros gép Senco
- Csavaros gép Maktec
- Csavaros gép Steren
- Csavaros gép Power Craft
- Csavaros gép Kraftwerk
- Csavaros gép Matrix
- Csavaros gép Kress
- Csavaros gép Urrea
- Csavaros gép Truper
- Csavaros gép Bruder Mannesmann
- Csavaros gép Meister Craft
- Csavaros gép Batavia
- Csavaros gép Westfalia
- Csavaros gép Black Decker
- Csavaros gép Elu
- Csavaros gép Sthor
- Csavaros gép Pansam
- Csavaros gép Gedore
- Csavaros gép SW-Stahl
- Csavaros gép MSW
- Csavaros gép Einhell Bavaria
- Csavaros gép Wera
- Csavaros gép Rodcraft
- Csavaros gép Ingersoll Rand
- Csavaros gép Chicago Pneumatic
- Csavaros gép Total
- Csavaros gép Netter Vibration
Legújabb útmutatók Csavaros gép

13 Január 2025

12 Január 2025

12 Január 2025

11 Január 2025

5 Január 2025

5 Január 2025

31 December 2025

29 December 2024

29 December 2024

17 December 2024