Használati útmutató Milwaukee M18 Fuel 2721-22
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milwaukee M18 Fuel 2721-22 (20 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/20
Cat. No. / No de cat.
2721-20
M18 FUEL™ SAWZALL® RECIPROCATING SAW WITH ONE-KEY™
SCIE ALTERNATIVE ONE-KEY™ SAWZALL® FUEL M18™
SIERRA RECÍPROCA M18 FUEL™ ONE-KEY™ SAWZALL®
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
SAWZALL®
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting ac-
cessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
• Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by hand or against your body leaves
it unstable and may lead to loss of control.
•
WARNING
To reduce the risk of injury in ap-
plications that produce a consid-
erable amount of dust, use an OSHA compliant
dust extraction solution in accordance with the
solution’s operating instructions.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SPECIFICATIONS
Cat. No. 2721-20 .....................................................
Volts 18 DC..............................................................
No Load Strokes per Minute ...................... 0 - 3000
Length of Stroke ........................................... 1.125"
Battery Type .................................................M18™
Charger Type M18™................................................
Recommended Ambient
Operating Temperature ......................0°F to 125°F
SYMBOLOGY
Volts
Direct Current
No Load Stokes per Minute (SPM)
C US
UL Listing for Canada and U.S.
FUNCTIONAL DESCRIPTION
1. Quik-Lok®
blade clamp
2. LED
3. Quik-Lok®
blade clamp release lever
4. Insulating boot
5. Rafter hook (not shown)
6. Trigger
7. Trigger lock
8. Mode selector
9. Handle
10. Shoe release lever
11. Shoe
4
7
6
8
9
5
3
10
1
11
2
Termékspecifikációk
Márka: | Milwaukee |
Kategória: | Fűrészgép |
Modell: | M18 Fuel 2721-22 |
Szüksége van segítségre?
Ha segítségre van szüksége Milwaukee M18 Fuel 2721-22, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Fűrészgép Milwaukee
6 Október 2024
3 Október 2024
16 Szeptember 2024
15 Szeptember 2024
13 Szeptember 2024
12 Szeptember 2024
6 Szeptember 2024
4 Szeptember 2024
1 Szeptember 2024
31 Augusztus 2024
Útmutatók Fűrészgép
- Fűrészgép Husqvarna
- Fűrészgép Dolmar
- Fűrészgép Parkside
- Fűrészgép Worx
- Fűrészgép Bosch
- Fűrészgép AEG
- Fűrészgép Einhell
- Fűrészgép Florabest
- Fűrészgép Stihl
- Fűrészgép Yard Force
- Fűrészgép Ozito
- Fűrészgép Makita
- Fűrészgép Hyundai
- Fűrészgép Flex
- Fűrészgép Rona
- Fűrészgép AL-KO
- Fűrészgép Scheppach
- Fűrészgép Ergotools Pattfield
- Fűrészgép Genesis
- Fűrészgép Güde
- Fűrészgép Hitachi
- Fűrészgép Remington
- Fűrészgép Toolcraft
- Fűrészgép Proviel
- Fűrészgép Cobra
- Fűrészgép Hilti
- Fűrészgép Black & Decker
- Fűrészgép Gardena
- Fűrészgép Global
- Fűrészgép Fieldmann
- Fűrészgép PowerPlus
- Fűrészgép Metabo
- Fűrészgép Bavaria
- Fűrészgép RYOBI
- Fűrészgép Stiga
- Fűrészgép Hammer
- Fűrészgép Solo
- Fűrészgép Proxxon
- Fűrészgép HiKOKI
- Fűrészgép Texas
- Fűrészgép Grizzly
- Fűrészgép Festool
- Fűrészgép McCulloch
- Fűrészgép Greenworks
- Fűrészgép Yato
- Fűrészgép Gardenline
- Fűrészgép Budget
- Fűrészgép Baumr-AG
- Fűrészgép Shindaiwa
- Fűrészgép McKenzie
- Fűrészgép Trotec
- Fűrészgép Zipper
- Fűrészgép Bebe Confort
- Fűrészgép Bavaria By Einhell
- Fűrészgép Herkules
- Fűrészgép Porter-Cable
- Fűrészgép DeWalt
- Fűrészgép Stanley
- Fűrészgép Silverline
- Fűrészgép Vonroc
- Fűrészgép Cotech
- Fűrészgép TAURUS Titanium
- Fűrészgép Pattfield
- Fűrészgép Luxor
- Fűrészgép Holzmann
- Fűrészgép Fein
- Fűrészgép Challenge Xtreme
- Fűrészgép ATIKA
- Fűrészgép Spear & Jackson
- Fűrészgép Cocraft
- Fűrészgép Craftsman
- Fűrészgép Ferm
- Fűrészgép Draper
- Fűrészgép Tryton
- Fűrészgép Skil
- Fűrészgép Meec Tools
- Fűrészgép Sun Joe
- Fűrészgép Dremel
- Fűrészgép Ferrex
- Fűrészgép Maktec
- Fűrészgép Bort
- Fűrészgép Power Craft
- Fűrészgép Troy-Bilt
- Fűrészgép Topcraft
- Fűrészgép Martha Stewart
- Fűrészgép Gamma
- Fűrészgép Sterwins
- Fűrészgép Kress
- Fűrészgép Duro
- Fűrészgép Prime3
- Fűrészgép IKRA
- Fűrészgép Truper
- Fűrészgép Masport
- Fűrészgép Echo
- Fűrészgép Bruder Mannesmann
- Fűrészgép Meister Craft
- Fűrészgép RIDGID
- Fűrészgép Batavia
- Fűrészgép Elu
- Fűrészgép Plantiflor
- Fűrészgép Lux Tools
- Fűrészgép Kompernass
- Fűrészgép Triton
- Fűrészgép Wolfcraft
- Fűrészgép Kreg
- Fűrészgép Vulcan
- Fűrészgép Anova
- Fűrészgép Ergofix
- Fűrészgép Pro-Cut
- Fűrészgép Narex
- Fűrészgép Rikon
- Fűrészgép Duro Pro
- Fűrészgép Toolson
- Fűrészgép Toledo
- Fűrészgép Erbauer
- Fűrészgép MSW
- Fűrészgép Royal Catering
- Fűrészgép Robust
- Fűrészgép Ultranatura
- Fűrészgép FIXIT
- Fűrészgép Einhell Bavaria
- Fűrészgép MyTool
- Fűrészgép Morrison
- Fűrészgép Garland
- Fűrészgép Donau Elektronik
- Fűrészgép Chicago Pneumatic
- Fűrészgép Bestgreen
- Fűrészgép Maxbear
- Fűrészgép Evolution
- Fűrészgép Extralink
- Fűrészgép Stalco
Legújabb útmutatók Fűrészgép
15 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024