Használati útmutató Milwaukee 2735-20
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milwaukee 2735-20 (7 oldal) a Zaklamp kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/7
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WORKLIGHTS
LAMPE DE TRAVAIL
LAMPARA DE TRABAJO
Cat. No.
No de Cat.
49-24-0145
49-24-0146
49-24-0171
2735-20
49-24-0185
49-24-0187
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
23
• Read and understand all the instructions before
using the appliance.
• To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
• Warning - The lens gets very hot during use. To
reduce the risk of burns, do not touch hot lens.
• Never insert bulbs other than MILWAUKEE
bulbs in the bulb socket. Bulbs other than
MILWAUKEE bulbs may cause short circuit of
battery and personal injury.
• Store idle work light out of reach of children.
Warm work lights can become hazardous in the
hands of children.
• Do not use outdoors.
• For a rechargeable appliance - Use only the char-
ger supplied by the manufacturer to recharge.
• For an appliance with a replaceable lamp - always
unplug or remove battery pack before replacing the
lamp. See "Specifi cations" for replacement bulbs.
• Know your work light. Read this manual carefully
to learn your work light's applications and limitations
IMPORTANT SAFETY INSTRUCTIONS
as well as potential hazards associated with this
type of tool.
• Batteries must be recharged only with the char-
ger specifi ed by the manufacturer. A charger that
may be suitable for one type of battery may create
a risk of fi re when used with another battery.
• Use work light only with specifi cally designated
battery pack. Use of any other batteries may create
a risk of fi re.
• When battery pack is not in use, keep it away
from metal objects like: paper clips, coins, keys,
nails, screws, or other small metal objects that
can make a connection from one terminal to
another. Shorting the battery terminals together may
cause sparks, burns, or a fi re.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
Before using the work light, read this operator's manual, your battery pack and charger operator's manual,
and all labels on the battery pack, charger and work light.
SAVE THESE
INSTRUCTIONS
SPECIFICATIONS
WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. When using
electric appliances, basic precautions should always be followed, including the following:
SYMBOLOGY
1
FUNCTIONAL DESCRIPTION
1. Bezel
assembly
2. On/Off
button
3. Magnet
4. Hook
5. Pivot head
2
4
3
5
5
2
Cat. No. Volts DC Replacement Bulbs For use with Battery Packs:
49-24-0185 28 49-81-0040 48-11-2830 28 V Li-Ion or equivalent
49-24-0187 28 n/a * 48-11-2830 28 V Li-Ion or equivalent
49-24-0171 18 49-81-0030 Use only MILWAUKEE M18™ Li-Ion battery packs.
2735-20 18 n/a * Use only MILWAUKEE M18™ Li-Ion battery packs.
49-24-0145 12 49-81-0020 Use only MILWAUKEE M12™ Li-Ion battery packs.
49-24-0146 12 n/a * Use only MILWAUKEE M12™ Li-Ion battery packs.
ASSEMBLY
Inserting/Removing Battery Pack
Insert the battery pack by sliding battery pack into
the body of the tool. Insert the battery pack until
the battery latches lock.
To remove the battery pack, press in both battery
latches and slide the battery pack off of the tool.
Adjusting the Pivot Head
Cat. No. 49-24-0145 and 49-24-0146 - The pivot
head can pivot to a range of 90°; with detents every
15°. Pivot head to desired position. Allow the detent
to snap into place. Do not forcibly pivot the head.
Cat. No. 49-24-0171, 2735-20, 49-24-0187, and
49-24-0185 - The pivot
head can pivot to a range
of 135°; with detents
every 10°. Pivot head to
desired position. Allow
the detent to snap into
place. Do not forcibly
pivot the head.
WARNING To reduce the
risk of injury, do not look directly into the light
when the work light is on.
WARNING Recharge only
with the charger specifi ed for the battery.
For specifi c charging instructions, read the
operator’s manual supplied with your charger
and battery.
WARNING To reduce the
risk of injury and damage, never insert bulbs
other than the recommended MILWAUKEE
replacement bulb in the bulb socket. Other
bulbs will over heat!
WARNING To reduce the
risk of injury, DO NOT operate work light
without bezel assembly in place. Bulb does
get hot. Always remove battery pack before
changing or removing bulbs. Always allow
the work light to cool for at least 10 minutes
before replacing the bulb.
OPERATION
To turn the work light, press the ON/OFF but-on
ton. To turn off the work light, press the ON/OFF
button again.
Hook
Cat.No. 2735-20,
49-24-0185,
49-24-0187 and
49-24-0171)
To use the hang-
ing hook, press in
the hook joint. Pull
the hook out.
Replacing the Bulb (Cat. No. 49-24-0145,
49-24-0171, and 49-24-0185)
NOTE: Cat. No. 49-24-0146, 2735-20, and
49-24-0187 use an LED bulb that cannot be re-
placed. Bezel can not be removed. Attempting to
remove the bezel will damage tool.
1. Remove battery pack before changing bulb.
2. Unscrew the bezel assembly on pivot head by
turning counterclockwise.
3. Remove the bezel assembly.
4. For Cat. No. 49-24-0185
and 49-24-0171, pull
the aluminum heat sink
forward.
5. Gently rotate bulb coun-
ter clockwise and pull
out.
To install new bulb, follow
above directions in reverse.
Cleaning
Keep tool handles clean, dry and free of oil or
grease. Use only mild soap and a damp cloth to
clean the tool, battery pack and charger since cer-
tain cleaning agents and solvents are harmful to
plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia
and household detergents containing ammonia.
Never use flammable or combustible solvents
around tools.
Maintain Work Light
Keep your work light, battery pack and charger in
good repair by adopting a regular maintenance
program. If the work light does not work properly,
return the work light to a MILWAUKEE service
facility for repairs.
MAINTENANCE
WARNING To reduce the
risk of injury, always unplug the charger and
remove the battery pack from the charger
or tool before performing any maintenance.
Never disassemble the tool, battery pack or
charger. Contact a MILWAUKEE service facility
for ALL repairs.
WARNING To reduce the risk
of personal injury and damage, never immerse
your tool, battery pack or charger in liquid or
allow a liquid to fl ow inside them.
ACCESSORIES
For a complete listing of accessories refer to your
MILWAUKEE Electric Tool catalog or go online
to www.milwaukeetool.com. To obtain a catalog,
contact your local distributor or a service center.
WARNING Always remove
battery pack before changing or removing
accessories. Only use accessories specifi -
cally recommended for this tool. Others may
be hazardous.
Pull
out
Press
Bulb
Aluminum
heat sink
Pull
forward
Cat. No.
49-24-0185,
49-24-0171
NOTE: Use a soft cloth when installing bulbs. Direct
contact with oils or other contamination can shorten
the life of bulbs.
On Cat. No. 49-24-0171 and 49-24-0185, a spare
bulb can be stored behind the aluminum heat sink.
See “Specifi cations” chart for proper replacement
bulbs. See your nearest MILWAUKEE Retailer or
Service Center to obtain replacement bulbs.
*LED worklights do not require replacement parts.
Volts
Direct Current
Underwriters Laboratories, Inc.
United States and Canada
Underwriters Laboratories, Inc.
45
• Lire et bien comprendre toutes les instructions
avant d’utiliser l’appareil.
• Pour réduire les risques de blessures, porter
une attention particulière lorsque le produit est
utilisé en présence d’enfants.
• Avertissement – La lentille devient très chaude
pendant l’utilisation. Pour réduire les risques de
brûlures, ne pas toucher à la lentille si celle-ci est
chaude.
• N’insérez jamais dans la douille pour am-
poule des ampoules autres que celles de
MILWAUKEE. L’insertion d’ampoules d’une autre
marque que MILWAUKEE peut entraîner un court-
circuit de la pile et des blessures.
• Rangez la lampe de tavail hors de laportée des
enfants. Chauffer les lumières de travail peuvent
devenir hasardeuses dans les mains d’enfants.
• Ne pas utiliser cet outil à l’extérieur. Ne pas
utiliser cet outil à l’extérieur.
• S’il s’agit d’un outil rechargeable, utiliser exclu-
sivement le chargeur fourni par le fabricant afi n de
le recharger.
• Si l’outil est doté d’une lampe à ampoule amov-
ible, toujours débrancher l’outil avant de remplacer
l’ampoule. Consulter la section « Spécifi cations »
pour obtenir des renseignements sur les ampoules
de rechange.
• Familiarisez-vous avec votre lampe de travil.
Lisez attentivement ce manuel pour apprendre
les applications, limitations et risques inhérents
au maniement de ce genre d’outil.
• Doit être rechargée seulement avec le chargeur
spécifi é pour la pile. Un chargeur adapté à un
certain type de pile peut créer un risque d’incendie
s’il est utilisé avec d’autres piles.
• N’utiliser la lampe arisez-vous avec votre
lampe de travil sans fi l qu’avec le bloc de piles
spécifi é. L’utilisation de toute autre pile peut créer
un risque d’incendie.
• Lorsque le bloc-batterie n'est pas en service,
tenez-le à l'écart d'autres objets métalliques
(trombones, pièces de monnaie, clés, clous,
vis, etc.) susceptibles d'établir un contact
électrique entre les deux bornes. La mise en
court-circuit des bornes de la batterie peut produire
des étincelles et constitue un risque de brûlures
ou d'incendie.
• Entretenez les étiquettes et marques du fab-
ricant. Les indications qu'elles contiennent sont
précieuses. Si elles deviennent illisibles ou se
détachent, faites-les remplacer gratuitement à un
centre de service MILWAUKEE accrédité.
Avant d’utiliser le lampe de travil, lire ce manuel de l’opérateur, le manuel de l’opérateur de la batterie
et du chargeur, et toutes les étiquettes de la batterie, du chargeur et de le lampe de travil.
AVERTISSEMENTVOUS DEVEZ LIRE ET COMPRENDRE TOUTES
LES INSTRUCTIONS Lors de l’utilisation d’outils électriques, toujours suivre les
consignes de base, notamment :
RÈGLES IMPORTANTES DE SÉCURITÉ
DESCRIPTION FONCTIONNELLE
1. Ensemble collet
2. Bouton «On/Off»
(Marche/Arrêt)
3. Aimant
4. Crochet
5. Tête pivotante
SPÉCIFICATIONS
CONSERVEZ CES
INSTRUCTIONS
PICTOGRAPHIE
4
5
No de Cat. Volts
CD L’ampoule de
rechange Pour l’usage avec des Batteries:
49-24-0185 28 49-81-0040 48-11-2830 28 V Li-Ion ou équivalent
49-24-0187 28 s/o * 48-11-2830 28 V Li-Ion ou équivalent
49-24-0171 18 49-81-0030 Utilisez uniquement les batteries Li-ion de MILWAUKEE M18™
2735-20 18 s/o * Utilisez uniquement les batteries Li-ion de MILWAUKEE M18™
49-24-0145 12 49-81-0020 Utilisez uniquement les batteries Li-ion de MILWAUKEE M12™
49-24-0146 12 s/o * Utilisez uniquement les batteries Li-ion de MILWAUKEE M12™
1
3
2
2
*L’ampoule de LED ne peut pas être remplacée.
5
TECHTRONIC INDUSTRIES' warranty is for 5 year since the original purchase date.
This warranty card covers any defect in material and workmanship on this Power Tool.
To make this warranty valid, present this warranty card, sealed/stamped by the distributor or store where you pur-
chased the product, to the Authorized Service Center (ASC). Or, if this card has not been sealed/stamped, present the
original proof of purchase to the ASC.
Call toll-free 1 800 832 1949 to fi nd the nearest ASC, for service, parts, accessories or components.
Procedure to make this warranty valid
Take the product to the ASC, along with the warranty card sealed/stamped by the distributor or store where you pur-
chased the product, and there any faulty piece or component will be replaced without cost for you. We will cover all
freight costs relative with this warranty process.
Exceptions
This warranty is not valid in the following situations:
a) When the product is used in a different manners from the end-user guide or instruction manual.
b) When the conditions of use are not normal.
c) When the product was modifi ed or repaired by people not authorized by TECHTRONIC INDUSTRIES.
Note: If cord set is damaged, it should be replaced by an Authorized Service Center to avoid electric risks.
SERVICE AND ATTENTION CENTER
Av Presidente Mazarik 29 Piso 7, 11570 Chapultepec Morales
Miguel Hidalgo, Distrito Federal, Mexico
Ph. 52 55 4160-3547
IMPORTED AND COMMERCIALIZED BY:
TECHTRONIC INDUSTRIES MEXICO, .S.A. DE C.V.
Av Presidente Mazarik 29 Piso 7, 11570 Chapultepec Morales
Miguel Hidalgo, Distrito Federal, Mexico
LIMITED WARRANTY - USA AND CANADA
LIMITED WARRANTY - MEXICO, CENTRAL AMERICA AND CARIBBEAN
Model:
Date of Purchase:
Distributor or Store Stamp:
Every MILWAUKEE power tool (including cordless product – tool, battery pack(s) - see separate & distinct
CORDLESS BATTERY PACK LIMITED WARRANTY statements & battery charger and Work Lights*) is war-
ranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain
exceptions, MILWAUKEE will repair or replace any part on an electric power tool which, after examination, is
determined by MILWAUKEE to be defective in material or workmanship for a period of fi ve (5) years* after the
date of purchase unless otherwise noted. Return of the power tool to a MILWAUKEE factory Service Center
location or MILWAUKEE Authorized Service Station, freight prepaid and insured, is required. A copy of the
proof of purchase should be included with the return product. This warranty does not apply to damage that
MILWAUKEE MILWAUKEE determines to be from repairs made or attempted by anyone other than authorized
personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
*The warranty period for, Job Site Radios, M12™ Power Port, M18™ Power Source, and Trade Titan™ Indus-
trial Work Carts is one (1) year from the date of purchase. The warranty period for a LED Work Light and LED
Upgrade Bulb is a limited LIFETIME warranty to the original purchaser only, if during normal use the LED bulb
fails the Work Light or Upgrade Bulb will be replaced free of charge.
*This warranty does not cover Air Nailers & Stapler, Airless Paint Sprayer, Cordless Battery Packs, Gasoline
Driven Portable Power Generators, Hand Tools, Hoist – Electric, Lever & Hand Chain, M12™ Heated Jackets,
Reconditioned product and Test & Measurement products. There are separate and distinct warranties avail-
able for these products.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE power tool product.
The manufacturing date of the product will be used to determine the warranty period if no proof of purchase is
provided at the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A
CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY PRODUCT. IF YOU DO NOT MILWAUKEE
AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MIL-
WAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR
ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE
OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY
CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IN-
CIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN
OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH
IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS
DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only.
Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s website www.mil-
waukeetool.com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty
and non-warranty service on a Milwaukee electric power tool.
Volts
Tension CD seul.
Underwriters Laboratories, Inc.,
États-Unis et Canada
Underwriters Laboratories, Inc.
Termékspecifikációk
| Márka: | Milwaukee |
| Kategória: | Zaklamp |
| Modell: | 2735-20 |
Szüksége van segítségre?
Ha segítségre van szüksége Milwaukee 2735-20, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Zaklamp Milwaukee
15 Szeptember 2024
3 Szeptember 2024
30 Augusztus 2024
30 Augusztus 2024
30 Augusztus 2024
30 Augusztus 2024
30 Augusztus 2024
30 Augusztus 2024
30 Augusztus 2024
30 Augusztus 2024
Útmutatók Zaklamp
- Zaklamp Nedis
- Zaklamp Maglite
- Zaklamp Philips
- Zaklamp Gorenje
- Zaklamp SilverCrest
- Zaklamp Garmin
- Zaklamp Neff
- Zaklamp Makita
- Zaklamp HQ
- Zaklamp Emos
- Zaklamp VDO
- Zaklamp GoGen
- Zaklamp Cateye
- Zaklamp Hama
- Zaklamp Knog
- Zaklamp Toolcraft
- Zaklamp Klein Tools
- Zaklamp Carson
- Zaklamp Black & Decker
- Zaklamp NightStick
- Zaklamp Ledlenser
- Zaklamp TFA
- Zaklamp Princeton Tec
- Zaklamp Olympia
- Zaklamp Abus
- Zaklamp SureFire
- Zaklamp Pyle
- Zaklamp DeWalt
- Zaklamp Sanyo
- Zaklamp Silva Schneider
- Zaklamp Silverline
- Zaklamp Trebs
- Zaklamp Nitecore
- Zaklamp Varta
- Zaklamp Olight
- Zaklamp Anker
- Zaklamp PCE
- Zaklamp Schwaiger
- Zaklamp Topeak
- Zaklamp Lupine
- Zaklamp Blackburn
- Zaklamp Laserliner
- Zaklamp Fenix
- Zaklamp Spanninga
- Zaklamp Ansmann
- Zaklamp Brennenstuhl
- Zaklamp Streamlight
- Zaklamp Nordride
- Zaklamp Silva
- Zaklamp Celestron
- Zaklamp Maktec
- Zaklamp Steren
- Zaklamp Trelock
- Zaklamp Livarno
- Zaklamp Petzl
- Zaklamp Black Diamond
- Zaklamp Kayoba
- Zaklamp Goobay
- Zaklamp Little Tikes
- Zaklamp LED Lenser
- Zaklamp Parat
- Zaklamp Coleman
- Zaklamp Goal Zero
- Zaklamp AccuLux
- Zaklamp ArmyTek
- Zaklamp Nebo
- Zaklamp Underwater Kinetics
- Zaklamp MOON
- Zaklamp KSE-Lights
- Zaklamp SuperNova
- Zaklamp Alpen Optics
- Zaklamp Arcas
- Zaklamp FoxFury
- Zaklamp Beghelli
Legújabb útmutatók Zaklamp
15 Október 2024
12 Október 2024
7 Október 2024
7 Október 2024
4 Október 2024
2 Október 2024
2 Október 2024
1 Október 2024
1 Október 2024
1 Október 2024