Használati útmutató Milwaukee 2462-20
Milwaukee
Csavaros gép
2462-20
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milwaukee 2462-20 (16 oldal) a Csavaros gép kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/16
Cat. No. / No de cat.
2461-20, 2462-20, 2463-20
M12™ CORDLESS IMPACT WRENCHES AND IMPACT DRIVER
CLÉS À CHOCS ET VISSEUSE M12™
LLAVES DE IMPACTO E IMPULSOR DE IMPACTO DE M12™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply. Use of an GFCI
reduces the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o-position before connecting to power
source and/or battery pack, picking up or carry-
ing the tool. Carrying power tools with your nger
on the switch or energizing power tools that have
the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
• Do not use the power tool if the switch does not
turn it on and o. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, break-
age of parts and any other condition that may
aect the power tool’s operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and the
work to be performed. Use of the power tool for
operations dierent from those intended could result
in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and re.
3
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specied in the instructions.
Charging improperly or at temperatures outside
the specied range may damage the battery and
increase the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
IMPACT WRENCH/IMPACT DRIVER
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator
an electric shock.
• Wear ear protectors. Exposure to noise can
cause hearing loss.
• Use only sockets and other accessories spe-
cically designed for use on impact wrenches
and drivers. Other sockets and accessories might
shatter or break causing injury.
•
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to lter out microscopic particles.
SPECIFICATIONS
Volts .............................................................. 12 DC
RPM ............................................................. 0-2500
Battery Type .................................................M12™
Charger Type ................................................M12™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Cat. No. 2461-20 .....................................................
Drive Shank ..........................................1/4" Square
IPM .............................................................. 0-3800
Cat. No. 2462-20 .....................................................
Drive Shank ...............................................1/4" Hex
IPM .............................................................. 0-3300
Cat. No. 2463-20 .....................................................
Drive Shank ..........................................3/8" Square
IPM .............................................................. 0-3300
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
C US
UL Listing for
Canada and U.S.
FUNCTIONAL DESCRIPTION
1. Trigger
2. Control switch
3. LED
4. Drive Shank
5. Fuel Gauge
6. Handle
7. 1/4" Square drive
8. 3/8" Square drive
Cat. No.
2461-20
7
Cat. No.
2463-20
8
Cat. No.
2462-20
5
4
3
2
16
Termékspecifikációk
| Márka: | Milwaukee |
| Kategória: | Csavaros gép |
| Modell: | 2462-20 |
Szüksége van segítségre?
Ha segítségre van szüksége Milwaukee 2462-20, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Csavaros gép Milwaukee
30 December 2025
30 December 2025
7 Október 2024
4 Október 2024
27 Szeptember 2024
23 Szeptember 2024
21 Szeptember 2024
20 Szeptember 2024
18 Szeptember 2024
18 Szeptember 2024
Útmutatók Csavaros gép
- Csavaros gép Parkside
- Csavaros gép Worx
- Csavaros gép Bosch
- Csavaros gép Panasonic
- Csavaros gép AEG
- Csavaros gép Einhell
- Csavaros gép Ozito
- Csavaros gép Makita
- Csavaros gép Emos
- Csavaros gép Omega
- Csavaros gép Mafell
- Csavaros gép Genesis
- Csavaros gép Güde
- Csavaros gép Hitachi
- Csavaros gép Toolcraft
- Csavaros gép Hilti
- Csavaros gép Black & Decker
- Csavaros gép Kawasaki
- Csavaros gép Fieldmann
- Csavaros gép PowerPlus
- Csavaros gép Metabo
- Csavaros gép Powerfix
- Csavaros gép Biltema
- Csavaros gép BaseTech
- Csavaros gép Chamberlain
- Csavaros gép RYOBI
- Csavaros gép Beta
- Csavaros gép HiKOKI
- Csavaros gép Festool
- Csavaros gép Greenworks
- Csavaros gép Yato
- Csavaros gép Velleman
- Csavaros gép Trotec
- Csavaros gép Bavaria By Einhell
- Csavaros gép Porter-Cable
- Csavaros gép DeWalt
- Csavaros gép Wiha
- Csavaros gép Stanley
- Csavaros gép Silverline
- Csavaros gép Vonroc
- Csavaros gép Cotech
- Csavaros gép TAURUS Titanium
- Csavaros gép Alpha Tools
- Csavaros gép Fein
- Csavaros gép Cleco
- Csavaros gép Weidmüller
- Csavaros gép EasyMaxx
- Csavaros gép Cocraft
- Csavaros gép Craftsman
- Csavaros gép Laserliner
- Csavaros gép Hazet
- Csavaros gép Toolland
- Csavaros gép Ferm
- Csavaros gép Skil
- Csavaros gép Meec Tools
- Csavaros gép Dremel
- Csavaros gép Tacklife
- Csavaros gép Senco
- Csavaros gép Maktec
- Csavaros gép Steren
- Csavaros gép Power Craft
- Csavaros gép Kraftwerk
- Csavaros gép Matrix
- Csavaros gép Kress
- Csavaros gép Urrea
- Csavaros gép Truper
- Csavaros gép Bruder Mannesmann
- Csavaros gép Meister Craft
- Csavaros gép Batavia
- Csavaros gép Westfalia
- Csavaros gép Black Decker
- Csavaros gép Elu
- Csavaros gép Sthor
- Csavaros gép Pansam
- Csavaros gép Gedore
- Csavaros gép SW-Stahl
- Csavaros gép MSW
- Csavaros gép Einhell Bavaria
- Csavaros gép Wera
- Csavaros gép Rodcraft
- Csavaros gép Ingersoll Rand
- Csavaros gép Chicago Pneumatic
- Csavaros gép Total
- Csavaros gép Netter Vibration
Legújabb útmutatók Csavaros gép
13 Január 2025
12 Január 2025
12 Január 2025
11 Január 2025
5 Január 2025
5 Január 2025
31 December 2025
29 December 2024
29 December 2024
17 December 2024