Használati útmutató Miele WCI670 TDos XL&Wifi

Miele mosógép WCI670 TDos XL&Wifi

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Miele WCI670 TDos XL&Wifi (4 oldal) a mosógép kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
WCI 670 en - AU, NZ M.-Nr. 10 874 830/00
Before the first use Operating the washing machine Preparing the laundry Selecting a programme Adding detergent Starting the programme Extras
OPERATING THE WASHING MACHINE
PREPARING THE LAUNDRY/SELECTING A PROGRAMME
ADDING DETERGENT/STARTING THE PROGRAMME
3 5
12
4
ɉDamage resulting from incorrect
installation and connection.
Installing and connecting the washing
machine incorrectly will cause serious
damage.
Please read the separate operating
instructions supplied with the appliance.
ɉDamage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing machine
and to adjacent cabinetry or appliances.
Please read the separate operating
instructions supplied with the appliance.
Switching on the washing machine
ĺTurn the programme selector to the Cottons
programme.
The welcome tone will sound and the
welcome screen will light up.
The display will guide you through the initial
commissioning, which is divided into 5steps.
For further information please refer to the
separate operating instructions.
Operating the sensor controls
The sensor controls react to fingertip
contact. Selection is possible as long as the
respective sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means: selection
possible
1 Control panel
The control panel consists of a display
and various sensor controls.
2 Display
Values are shown and/or selected in the
display.
3 Sensor controls 
The values in the display can be
changed with the . sensors
4 OK sensor
The OK sensor is used to confirm
selected values.
5 TwinDos sensors with options for
Whites and Colours
The TwinDos sensor is used for
deactivating and activating automatic
detergent dispensing.
6 Optical interface
for service technicians.
7 Sensor controls for Extras
You can supplement wash programmes
with Extras.
8 Sensor
You can view information about the
energy and water consumption of your
washing machine with the sensor.
9 Sensor
The sensor starts the Delay start
function or SmartStart.
10 Sensor
You can specify the level of soiling of the
load in three settings. This sensor is only
active with the TwinDos option activated.
11 Start/Stop sensor
Touching the Start/Stop sensor starts
the selected programme or cancels a
programme that has already started.
12 Sensor
Activates detergent dispensing with a
capsule.
13 Programme selector
For selecting programmes and switching
the washing machine off.
Washing environmentally and economically
–To get the most out of your machine,
load the maximum dry load for the
programme you are using.
–When smaller amounts of laundry are
washed, the Auto load control system
will reduce the amount of water and
energy used.
–Modern detergents make it possible to
wash at lower temperatures (e.g. 20°C).
Using lower temperature settings will
save energy.
–For precise dispensing, use automatic
detergent dispensing.
–Adjust the dosage to the degree of
soiling of the laundry.
–Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
1. Preparing the laundry
ĺEmpty all pockets.
ɉForeign objects (e.g. nails,
coins, paper clips, etc.) can
cause damage to garments and
components in the machine.
ĺSort the laundry by colour and by care label. Most
garments have a textile care label in the collar or side
seam.
ĺPre-treat stains and badly soiled areas (see the booklet
"Miele's guide to laundry care").
2. Selecting a programme
ĺTurn the programme selector to a programme.
Programme selection
There are three possible ways to select a programme:
1. Selecting standard programmes via the
programme selector
ĺTurn the programme selector to the required
programme.
The selected programme will appear in the display. This
will then be replaced by the standard display.
2. Selecting further programmes via the "Further
programmes/ setting and the display:"
ĺTurn the programme selector to the Further
programmes/position.
Sportswear will appear in the display.
ĺTouch the sensors until the programme you want 
appears in the display.
ĺConfirm the programme with the sensor.OK
3. Selecting programmes via the MobileControl
and the Miele@mobile app
ĺTurn the programme selector to the MobileControl
position.
ĺTouch the sensor.Start⁄Stop
The washing machine can now be operated via a mobile
device using the Miele@mobile app.
1 Detergent dispenser drawer
2 Control panel
3 Access to drain filter, drain pump
and emergency release
4 Door
5 Access panel for TwinDos
containers
3. Loading the washing machine
Opening the door
ĺReach under the door grip and
pull the door open.
ĺUnfold the laundry and load
loosely in the drum.
Closing the door
ĺMake sure that no items are
caught between the door and
the seal.
ĺShut the door with a gentle
swing.
4. Selecting programme settings
Selecting a temperature/spin speed
ĺTouch the sensors above or below the temperature 
or spin speed value in the display until the temperature/
spin speed you want appears in the display.
Selecting Extras
There are two ways of selecting Extras.
1. Directly above the sensor controls
ĺTouch the sensor for the Extra you want. It then lights up
brightly.
2. Via the Extras sensor control and the display
ĺTouch the sensor control.Extras
The following appears in the display: No Extras 
ĺTouch the sensor controls until the Extra you want 
appears in the display and confirm this with the OK
sensor.
Degree of soiling
The sensor is only active when the
TwinDos option is activated.
– light
No visible soiling or stains
– normal
Visibly soiled and⁄or just a few slight
stains
– heavy
Heavily soiled and⁄or clearly visible stains
Delay start/SmartStart
Delay start
With Delay start you can delay the start of
a programme. The start of the programme
can be delayed from 15 minutes up to a
maximum of 24 hours.
SmartStart (only functional in selected
countries)
The SmartStart function lets you define
a time period during which your washing
machine will start automatically. The
machine will start on receipt of a signal, e.g.
from your energy supplier, that indicates
that the electricity tariff is particularly
economical.
5. Adding detergent
There are several options for adding
detergent.
TwinDos
TwinDos dispensing is automatically
activated for all programmes in which
dispensing is possible.
Changing TwinDos dispensing
You can change the suggested colour
composition of the laundry.
ĺTouch the sensor for or .Whites Colours
Deactivating TwinDos dispensing
ĺTouch the TwinDos sensor.
The sensor control is only dimly lit and
dispensing is deactivated.
Filling with detergent
Any detergent suitable for automatic front
loading washing machines can be used
with this appliance. Please observe the
instructions for use and dosage on the
detergent packaging.
Ensure that TwinDos dispensing is
deactivated.
ĺPull out the
detergent drawer
and add
detergent to the
compartments.
Detergent for the pre-wash
Detergent for the main wash,
including Soak if selected
/ Fabric softener, liquid starch or
capsules
Using detergent tablets or pods
Always put detergent tablets or pods
directly in the drum with the laundry.
They cannot be added via the detergent
dispenser drawer.
CapDosing
Three different types of capsules are
available:
Fabric care (e.g. fabric conditioner)
Additives (e.g. detergent enhancers)
Detergent
Each capsule contains the correct amount
for one wash cycle.
Capsules are available to order from Miele
or from the Miele online shop (see the end
of this booklet for contact details).
Keep capsules out of the reach of
children.
Activating CapDosing
ĺTouch the sensor.
The following appears in the display:
No cap 
ĺTouch the sensors until the capsule 
you want appears in the display.
ĺConfirm the capsule with the sensor.OK
See "Detergent" in the operating
instructions for more information.
6. Starting the programme - end
of the programme
Starting the programme
ĺTouch the flashing sensor.Start/Stop
The door will lock ( appears in the display)
and the programme will start.
At the end of the programme
The door is still locked during the Anti-
crease phase and the following will appear
alternately in the display:
Finish/Anti-crease and
 Press Start/Stop
ĺTouch the sensor. The door Start/Stop
will be unlocked.
ĺPull open the door.
ĺRemove the laundry.
Check that all items have been removed
from the drum.
ĺCheck the folds
in the door seal
for any small
articles, e.g.
buttons, which
might be lodged
there.
ĺTurn the programme selector to the
position. This switches the washing
machine off.
ĺIf applicable, remove the used capsule
from the detergent dispenser drawer.
Close the door. Otherwise there is
a danger of objects being placed
inadvertently in the drum. If these remain
unnoticed and were washed in the next
load, they could damage the laundry. An
open door is also a danger to pets and
children.
Extras
You can use the Extras sensor to augment
the wash programmes.
Short
The programme duration is reduced.
Mechanical action and energy usage are
increased.
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will give a better
result. Follow the instructions in the
display. Small loads give a better result.
The garments must be suitable for drying
in a tumble dryer and suitable for  
ironing  .
Water +
The water level in the wash and rinse
stages is increased and a second rinse is
carried out in the "Separate rinse/Starch"
programme.
You can select other functions for the
Water + sensor control. These are
described in "Settings".
Pre-wash
For laundry with large amounts of dirt, e.g.
dust and sand.
Stains
For cleaning stained laundry. The
programme sequence is altered with this
option.
Soak
For heavily soiled and stained items with
protein stains.
A duration of between 30minutes
and 6hours can be chosen for the
soak process. See "Settings" for more
information.
The factory default setting is 30minutes.
Intensive
For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency
is increased through more intense
mechanical action and the application of
more heat energy.
Extra quiet
This option reduces noise levels during
the wash programme. Use this if you
want to wash during quiet periods (for
instance, when children are sleeping). The
final spin is automatically reduced to
(Rinse hold). The programme duration is
increased.
Extra gentle
Drum rotation and wash duration are
reduced. Lightly soiled fabrics are washed
more gently.
AllergoWash
This option should be used where high
standards of hygiene are required. More
energy is used to lengthen temperature
holding times and more water is used to
increase rinsing efficiency. The items must
be suitable for drying in a tumble dryer
 . and suitable for ironing
en - AU, NZ M.-Nr. 10 874 830
Cleaning and careProgramme chart Detergent Problem solving guide
PROGRAMME CHART
CLEANING AND CARE
PROBLEM SOLVING GUIDE
Quick Start Guide
Washing machine
These short instructions are not a substitute for the operating instructions supplied
with the appliance. Please read the operating instructions supplied with your washing
machine before using it for the first time and take note of the Warning and Safety
instructions, as well as the full descriptions on how to use your appliance.
Programme Load (inkg) Temperature Items Extras
Cottons 9.0 Cold to 90°C Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.
, , , ,
, , , ,
, 
Minimum iron 4.0 Cold to 60°C Synthetic, mixed fibre and easy care cotton. , , , ,
, , , ,
, 
Delicates 3.0 Cold to 60°C Delicate garments made from synthetic fibre, mixed fibre, rayon and
viscose.
, , , ,
, , , , 
Woollens 2.0 Cold to 40°C Machine-washable or hand-washable wool or wool blend fabric. If the
care label does not specify a temperature, wash using the cold setting.
Silks 1.0 Cold to 30°C Silks and other hand-washable fabrics with no wool content, e.g. satin,
lace and silk.
Shirts 1.0 ⁄ 2.0 Cold to 60°C Shirts and blouses made of cotton and mixed fibre.
If the preset Pre-ironingoption is switched off, the maximum load
capacity is increased to 2.0kg.
, , , ,
, , , , 
MobileControl – – The Miele@mobile app is used for selecting programmes and operating
the machine.
–
Express 20 3.5 Cold to 40°C Cotton garments that have hardly been worn or are only very lightly
soiled.
, 
Dark garments/
Denim
3.0 Cold to 60°C Black and dark garments made from cotton, mixed fibres and denim. , , , ,
, , , , 
Outerwear 2.5 Cold to 40°C Performance outerwear (e.g. jackets and trousers) made from
membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®
etc.
, , , ,
, , 
Proofing 2.5 40°C Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
–
Sportswear 3.0 Cold to 60°C Sportswear such as jersey shirts and leggings, and microfibre and
fleece garments.
, , , ,
, , , 
Automatic plus 6.0 Cold to 40°C Mixed loads of garments sorted according to colour which are suitable
for the and programmes.Cottons Minimum iron
, , , ,
, , , , 
Pillows 2 (40x80cm)
1 (80x80cm)
Cold to 60°C Synthetic filled washable pillows. , , , ,
, , 
Curtains 2.0 Cold to 40°C Curtains, including net curtains, specified as machine-washable by the
manufacturer.
, , , ,
, , , 
Down filled items 2.0 Cold to 60°C Jackets, sleeping bags, pillows and other down-filled items. , , , ,
, , , 
First wash 3.0 Cold to 40°C New items made of cotton, towelling and polyester fabric. , , , 
Down duvets 2.5 Cold to 60°C Quilts, duvets and pillows with feather or down filling. , , , ,
, , 
Separate rinse/
Starch
8.0 – For rinsing items washed by hand.
Starching table cloths, serviettes and workwear.
Drain/Spin 8.0 – Drain only: Select for the spin speed.0 rpm –
Clean machine No
load
85°C With frequent washing at low temperatures there is a danger of a
build-up of bacteria in the washing machine.
Cleaning the washing machine will significantly reduce bacteria, mould,
and biofilm, and prevent the build-up of unpleasant odours.
  = Short; = Pre-ironing; = Water+; = Stains; = Pre-wash; = Soak; = Intensive; = Extra quiet; = Extra gentle; = AllergoWash
Miele recommended detergents
Programmes
Miele
UltraPhase
1/2
Miele
Cap
Miele
Cap
Miele
Cap
Cottons – 
Minimum iron – 
Delicates   –
Woollens –– –
Silks –– –
Shirts – 
Express 20 – –
Dark garments/
Denim
– –
Outerwear –– – –
Proofing –– – –
Sportswear –– –
Automatic plus – 
Pillows – – –
Curtains – –
Down filled items –– –
First wash – –
Down duvets –– –
Separate rinse/
Starch
–/– –/– –/–/–
= recommended; – = not recommended
  = Sportswear; = Down Items; = WoolCare, = Fabric Softener; = Booster 
Cleaning the drum (Hygiene info)
Washing at low temperatures and/or using
liquid detergents can cause bacteria and
odours to build up in the washing machine.
Use the Clean machine programme to
clean the machine. Note the message in the
display:.
 Hygiene info:
Run a programme at min.
75°C or "Clean machine"
Cleaning the TwinDos system
ɉDamage resulting from dried washing
detergent.
If the system has not been used for a
long time (more than two months), the
detergent in the hoses can become
viscous or dry out. The hoses can
become blocked and would then need to
be cleaned by a service technician.
Clean the TwinDos system.
To clean the system, a refillable TwinDos
container is required (sold separately),
available online at shop.miele.com.
Cleaning the detergent dispenser
drawer
Washing at low temperatures and the use
of liquid detergent can lead to a build-up
of mould and bacteria in the detergent
dispenser drawer.
ĺClean the entire drawer at regular
intervals for hygiene reasons, even if you
are using the TwinDos system exclusively.
ĺPull out the
detergent
dispenser drawer
until a resistance
is felt.
ĺPress down the release button and, at
the same time, pull the drawer right out of
the machine.
ĺClean the detergent dispenser drawer
with warm water.
Cleaning the siphon and the fabric
softener channel
ĺPull the siphon
out of the
compartment
and clean it
under warm
running water.
ĺClean the siphon tube in the same way.
ĺRefit the siphon.
ĺClean the fabric
softener channel
using a brush
and warm water.
ɉLiquid starch can cause the siphon
to become clogged. Make sure that
you clean the siphon and siphon tube
particularly thoroughly after using liquid
starch a few times.
Cleaning the detergent dispenser
drawer housing
ĺUse a bottle brush to remove detergent
residues and limescale from the jets
inside the detergent dispenser drawer
housing.
Some of the messages in the display are more than one line long. Touch the or sensor  
to read them in full.
Message Possible cause and remedy
The control panel
remains dark.
There is no power to the machine.
ĺCheck whether the mains plug is plugged in and switched on.
ĺCheck whether the fuse or circuit breaker has tripped.
The washing machine has switched off automatically to save
energy.
ĺSwitch the washing machine on again by turning the programme
selector.
 Door lock. 
Service
The door is not closed properly. The door lock could not engage.
ĺClose the door again.
ĺRestart the programme. If the fault message appears again,
contact Miele.
 Check drainage.
See
The water outlet is blocked or restricted. The drain hose has been
fixed too high.
ĺClean the drain filter and the pump.
ĺCheck whether the maximum delivery head of 1m has been
exceeded.
 Water intake. See
The water inlet is blocked or restricted.
ĺCheck whether the tap is turned on properly.
ĺCheck whether the inlet hose is kinked.
ĺCheck whether there is sufficient water pressure.
The filter in the water inlet is blocked.
ĺClean the filter (see the operating instructions).
 Waterproof syst. .
 Service.
The water protection system has reacted.
ĺTurn off the tap.
ĺCall Miele.
  Service. Fault F There is a fault.
ĺDisconnect the washing machine from the main electricity
supply, either by switching it off at the wall socket and
withdrawing the plug, or by disconnecting it at the circuit
breaker.
ĺWait before reconnecting the washing at least 2 minutes
machine to the main electricity supply.
ĺThen switch the washing machine on again.
ĺRestart the programme.
If the fault message appears again, contact Miele.
 Door jammed.
Service.
The door lock has jammed.
ĺCall Miele.
Message Possible cause and remedy
 Check detergent Excessive foam has built up during washing.
ĺCheck the amount of detergent dispensed.
ĺWith automatic detergent dispensing, check the dosage amount
set.
ĺObserve the instructions on the detergent packaging and the
degree of soiling of the laundry.
ĺIf necessary, reduce the dosage amount by increments of 10%.
 Hygiene information:
Use a programme with
min.
75°C or "Clean
machine"
A programme using a temperature above 60°C has not been run
for a long time.
ĺTurn the programme selector to Further programmes/ and
select the programme in the submenu.Clean machine Care
ĺRun the programme using Miele IntenseClean or a Clean Machine
universal powder detergent.
This will clean the washing machine and prevent a build-up of
bacteria and odours.
 Levelling the machine The Extra which runs at the end of the programme Pre-ironing
could not be carried out properly.
ĺCheck whether the washing machine is aligned correctly
as described in "Installation and connection – Levelling the
machine".
ĺCheck whether the maximum delivery head of 1m has been
exceeded.
If the fault message appears again, contact Miele. The washing
machine can still be used, however without the Extra.Pre-ironing
 UltraPhase 1 almost
empty Only a few
more programmes are
possible
The detergent in the cartridge is running low. There are between
4and 8wash cycles remaining.
ĺOrder a new cartridge.
 Use TwinDos or start
Maintenance
See
TwinDos or automatic dispensing via compartment and⁄or  
has not been used for a long time.
ĺUse TwinDos for one of your next loads.
ĺCarry out the TwinDos maintenance programme as described in
"Cleaning and care - TwinDos maintenance".
 TwinDos
maintenance for
compartment must
be started See
TwinDos or automatic dispensing via compartment and⁄or  
has not been used for a long time. It is possible that detergent has
dried inside the hoses.
ĺCarry out the TwinDos maintenance programme immediately
as described in "Cleaning and care - TwinDos maintenance".
The messages will appear at the end of the programme and when the washing machine is
switched on and need to be confirmed with the sensor.OK

Termékspecifikációk

Márka: Miele
Kategória: mosógép
Modell: WCI670 TDos XL&Wifi

Szüksége van segítségre?

Ha segítségre van szüksége Miele WCI670 TDos XL&Wifi, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mosógép Miele

Miele

Miele WXF 660 WCS W1 Útmutató

3 Április 2025
Miele

Miele novotronic w 564 wps Útmutató

16 Január 2025
Miele

Miele Meteor 2065 WPS Útmutató

16 Január 2025
Miele

Miele METEOR 2823 Útmutató

16 Január 2025
Miele

Miele W 5847 WPS Útmutató

16 Január 2025
Miele

Miele W 2205 Útmutató

15 Január 2025
Miele

Miele METEOR 2878 WPS Útmutató

15 Január 2025
Miele

Miele W 404 Wasmachine Útmutató

13 Január 2025
Miele

Miele WKF 131 WPS Útmutató

25 December 2024
Miele

Miele W 2515 WPS Útmutató

25 December 2024

Útmutatók mosógép

Legújabb útmutatók mosógép

Whirlpool

Whirlpool awm 1008 Útmutató

6 Április 2025
Bauknecht

Bauknecht wa 1402 symphony Útmutató

6 Április 2025
Electrolux

Electrolux ewf 16781 Útmutató

6 Április 2025
Electrolux

Electrolux EW 1456W Útmutató

6 Április 2025
Indesit

Indesit WG1234TG Útmutató

5 Április 2025
AEG-Electrolux

AEG-Electrolux 53601 Útmutató

5 Április 2025
Whirlpool

Whirlpool AWOE7143 Útmutató

5 Április 2025
Samsung

Samsung SW56APP Útmutató

5 Április 2025
Samsung

Samsung WA15F7S4UWA Útmutató

5 Április 2025
Samsung

Samsung WA13R3Q3IW Útmutató

5 Április 2025