Használati útmutató Miele PT 8331

Miele Szárítógép PT 8331

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Miele PT 8331 (54 oldal) a Szárítógép kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/54

Operating instructions

Dryers

Gebruiksaanwijzing

Droogautomaat

PT 8251 + COP PT 8253

PT 8331 + COP PT 8333

PT 8401 PT 8403

PT 8503

PT 8803

To avoid the risk of accidents or damage to the machine it is

essential to read these instructions before installing,

commissioning and using it for the first time. M.-Nr. 07 713 212

en, nl - GB, NL

This machine must be installed in accordance with local and national building and safety regulations by a

suitably qualified engineer. In the U.K. this must be done for gas-heated machines by a Gas Safe registered

engineer. Adequate ventilation must be present in the room in which the machine is operated.

It is to read these instructions before installing and operating the machine.essential

Gas-heated machines

Safety precautions to take if you smell gas

– Turn off the gas emergency control valve immediately. This is usually located near the gas meter.

– Do not enter a room with an open flame where there is a smell of gas.

– Eliminate all sources of ignition in a safe manner. Do not smoke, light cigarette lighters or matches.

– Do not operate electrical lights or switches, i.e. do not switch them "On" or "Off".

– Open all windows and doors to ventilate the area.

– If the smell of gas persists, evacuate the building.

In the UK you must now:

- Call the Gas Emergency Contact Centre (Tel: 0 800 111 999)

- For any gas work in the UK always use a Gas Safe registered engineer.

In other countries please follow relevant country specific procedures on gas.

Keep these instructions in a safe place and ensure they are made available to new users. They must be made

aware of these Warning and Safety instructions.

All personnel working with this machine must be fully trained in all aspects of its use and safety.

Gas safety precautions

Gas safety precautions ......................................................................2

Warning and Safety instructions...............................................................4

Caring for the environment ...................................................................6

Guide to the machine ........................................................................7

Description of tumble dryer PT 8251, 8331, 8401 .................................................8

Description of tumble dryer PT 8253, 8333, 8403, 8503, 8803 .......................................9

Drying....................................................................................10

Sort the laundry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Drying....................................................................................11

Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Switch the machine on and load the drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Dryers PT 8251, 8331, 8401 ..................................................................12

Selecting a temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Selecting a drying duration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Programme finished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Dryers PT 8253, 8333, 8403, 8503, 8803 ........................................................13

Selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Lowering the temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Programme finished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Drying....................................................................................14

Interrupting a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Adding or removing items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

PT 8251, 8331 COP .........................................................................15

Control panel PT 8251, 8331 Profitronic B COP (Coin Operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Selecting a temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

At the end of the drying duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Reprogramming ...........................................................................16

Reprogramming individual drying programmes

(Changing the Standard options) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Example of reprogramming PT 8251, 8331, 8401 Profitronic B Timed programme machines. . . . . . . . . . . . . . 16

Example of reprogramming PT 8253, 8333, 8403, 8503, 8803 Profitronic B Plus Residual moisture programme

machines...............................................................................16

Programmable functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Problem solving guide ......................................................................18

Fault messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Other messages .........................................................................18

Cleaning and care ..........................................................................19

Fluff filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Installation and connection ..................................................................20

Levelling the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Installation on a raised plinth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Fitting the language insert (Programme selection panel). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Payment system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Communication module XKM RS232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Air inlet and exhaust connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Steam connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Hot water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Gas connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Technical data .............................................................................23

Explanation of symbols on the data plate ......................................................24

Contents