Használati útmutató Microchip MGC3130

Microchip nincs kategorizálva MGC3130

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Microchip MGC3130 (59 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/59
Aurea GUI User's Guide
Aurea Graphical User Interface User's Guide
Preface
Introduction
This document provides a guide to the use of the Aurea tool with Microchip Gesture ICs.
Recommended Reading
For the latest information on using the device, read the “ ” file (an HTML file) in the AureaReadme.html
installation directory. The release notes (Readme) contains update information and known issues that
may not be included in this user’s guide.
This user’s guide describes how to use the Aurea Graphical User Interface. Other useful documents are
listed below. The following Microchip documents are available and recommended as supplemental
reference resources.
• “ ” (DS40002037) – Consult this document for informationMGC3140 3D Gesture Controller Data Sheet
regarding the MGC3140 3D Gesture Controller.
• “GestIC® Design Guide” (DS40001716) – This document describes the GestIC system characteristic
parameters and the design process. It enables the user to generate a good electrode design and to
parameterize the full GestIC system.
• “MGC3140 GestIC® Library Interface Description User’s Guide” (DS40001875) – This document is the
interface description of the MGC3140’s GestIC Library. It outlines the function of the Library’s message
interface and contains the complete message reference to control and operate the MGC3140 system.
Description
The Aurea evaluation software demonstrates Microchip’s GestIC® technology and its features and
applications. Aurea provides visualization of MGC3XX0 generated data and access to GestIC Library
controls and configuration parameters. It provides the following:
• Visualization of hand position and user gestures
• Visualization of sensor data
• Run-Time Control of sensor features
• MGC3XX0 GestIC Library update
• Analog Front-End parameterization
• Colibri Signal Processing parameterization
• Logging of sensor values and storage in a log file
Software License Information
Copyright (C) 2013 Microchip Technology Inc. and its subsidiaries (“Microchip”). All rights reserved.
© 2018 Microchip Technology Inc. User Guide DS40001681E-page 1
You are permitted to use the Aurea software, MGC3140 Software Development Kit and other accompanying
software with Microchip products. Refer to the license agreement accompanying this software, if any, for
additional info regarding your rights and obligations.
SOFTWARE AND DOCUMENTATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL MICROCHIP, SMSC, OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER
CONTRACT, NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER
LEGAL EQUITABLE THEORY FOR ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES INCLUDING
BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, OR
OTHER SIMILAR COSTS.
Aurea GUI User's Guide
© 2018 Microchip Technology Inc. User Guide DS40001681E-page 2
Table of Contents
Preface............................................................................................................................ 1
Description.......................................................................................................................1
Software License Information..........................................................................................1
1. Overview....................................................................................................................4
1.1. Aurea Installation..........................................................................................................................4
1.2. Running Aurea............................................................................................................................. 4
1.3. MGC3x30 and MGC3140 differences.......................................................................................... 4
1.4. Aurea Graphical User Interface....................................................................................................5
2. Aurea Tabs................................................................................................................ 8
2.1. Colibri Suite Tab........................................................................................................................... 8
2.2. Signals Visualization Tab............................................................................................................15
2.3. Setup Tab................................................................................................................................... 18
2.4. Demo Tab................................................................................................................................... 49
3. Advanced Aurea Features.......................................................................................51
3.1. Logging Sensor Data..................................................................................................................51
4. Revision History.......................................................................................................54
5. Appendix A - Glossary.............................................................................................55
The Microchip Web Site................................................................................................ 56
Customer Change Notification Service..........................................................................56
Customer Support......................................................................................................... 56
Microchip Devices Code Protection Feature................................................................. 56
Legal Notice...................................................................................................................57
Trademarks................................................................................................................... 57
Quality Management System Certified by DNV.............................................................58
Worldwide Sales and Service........................................................................................59
© 2018 Microchip Technology Inc. User Guide DS40001681E-page 3

Termékspecifikációk

Márka: Microchip
Kategória: nincs kategorizálva
Modell: MGC3130

Szüksége van segítségre?

Ha segítségre van szüksége Microchip MGC3130, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Microchip

Microchip

Microchip AT89C51AC2 Útmutató

15 Január 2025
Microchip

Microchip AT91SAM7S32 Útmutató

15 Január 2025
Microchip

Microchip AT91SAM7SE32 Útmutató

15 Január 2025
Microchip

Microchip AT89LS52 Útmutató

15 Január 2025
Microchip

Microchip AT91SAM7S512 Útmutató

15 Január 2025
Microchip

Microchip AT97SC3205T Útmutató

15 Január 2025
Microchip

Microchip AT91SAM7SE512 Útmutató

15 Január 2025
Microchip

Microchip AT91SAM9CN11 Útmutató

15 Január 2025
Microchip

Microchip ATECC608A-TFLXTLS Útmutató

15 Január 2025
Microchip

Microchip ATA8215 Útmutató

15 Január 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025