Használati útmutató Microchip LX7720

Microchip nincs kategorizálva LX7720

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Microchip LX7720 (50 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/50

LX7720MLF Evaluation Board User Guide

Description

The LX7720MLF evaluation board (EVB) contains a soldered in place LX7720MLF and peripherals to allow LX7720

functionality to be quickly evaluated. Demonstration firmware is available for RTG4 FPGAs and SAM rad hard MCUs.

The LX7720MLF EVB uses a 40-way header for connection to FPGA or MCU controllers. The kit includes linker boards

for direct plug-in connection to an RTG4 FPGA FPGA DEV-KIT, an RT PolarFire FPGA RTPF-DEV-KIT, a PolarFire

MPF300-EVAL-KIT, a SmartFusion2 SoC FPGA M2S150-ADV-DEV-KIT, a SAMRH71F20 MCU Evaluation Kit and

SAMRH71-TFBGA-EK Evaluation Kit, and a SAMRH707F18 MCU Evaluation Kit.

Kit Contents

• LX7720MLF evaluation board with soldered-in-place LX7720MLF production part

• 24V 1.5A universal input AC adapter with 2.1mm x 5.5mm DC output connector, centre positive

• 2-position 5mm pitch terminal block socket type B, Molex 0395237002 or equivalent, to mate PL2

• 4-position 5mm pitch terminal block socket type B, Molex 0395237004 or equivalent, to mate PL_MOTOR

• FMC-HPC Linker adaptor to connect to various FPGA evaluation boards as listed above

• Linker board to connect to a SAMRH71F20-EK evaluation kit, plus a board with control switches and LEDs

• Linker board to connect to a SAMRH71-TFBGA-EK evaluation kit (which can also use the switch/LED board)

• Linker board to connect to a SAMRH707F18-EK evaluation kit, with LC filters for optional ∆Σ stream processing

• A bipolar 7.5°/step stepper motor for test purposes, mounted with ballast resistors for 24V operation (140Ω/phase)

• 4x 6mm, 4x 7mm nylon standoffs and 4x nuts for linker board height matching

• USB stick with documentation (see section 2 on page 4)

Ordering Information

Product Order Number

LX7720MLF Evaluation Board LX7720MLF-DB

Figure 1. LX7720MLF Evaluation Board

LX7720MLF Evaluation Board User Guide

Linker Adaptors to FPGA and MCU Evaluation Boards

1 Linker Adaptors to FPGA and MCU Evaluation Boards

The LX7720MLF EVB provides a 2x20 pin 0.1" pitch pin header, PL20, which provides 3.3V logic level control signals to

and from an external MCU controller or FPGA. Section 5 on page 21 details PL20's pinout, whic h is different to that used

by J20 on the LX7720-DB. The pinout was modified from that used by the LX7720-DB's PL20 to make the routing for

high-speed logic connections as direct as possible to the LX7720's pins.

The LX7720MLF EVB includes linker adaptors for direct interconnection to FPGA and MCU controller boards:

• The FMC-HPC linker (section 6 on page 23) routes PL20 signaling to a develop ment board with an HPC-FMC (High

Pin Count FPGA Mezzanine Card) connector. The pinout is provided in Table 7 on page 24 and Table 8 on page 25.

Pinouts and FPGA resource allocations are provided for the following FPGA boards' HPC1-FMC connector:

 The RTG4 FPGA DEV-KIT (Table 9 on page 26)

 The PolarFire FPGA MPF300-EVAL-KIT (Table 9 on page 26)

 The RT PolarFire FPGA RTPF-DEV-KIT (Table 10 on page 27)

 The SmartFusion2 SoC FPGA M2S150-ADV-DEV-KIT (Table 11 on page 28)

Figure 2. RTG4 DEV_KIT using FMC-HPC Linker to Connect to LX7720MLF EVB

• The SAMRH71-EK linker (section 7 on page 30) routes PL20 signaling to a SAMRH71F20-EK evaluation kit for the

SAMRH71F20 MCU. Table 14 on page 31 provides the pinout and MCU resource allocation. The kit comprises a

linker board which connects a SAMRH71F20-EK to the LX7720MLF-EVB, a small board with switches, and a ribbon

cable:

 The linker board connects signals from the SAMRH71F20-EK's 0.1" headers J24 and J30 to PL20

▫ All four LX7720 half-bridges are routed to the MCU PWM outputs, for BLDC and stepper compatibility

▫ 3 of the 4 motor phase current ∆Σ serial streams (SNS_OUT_A, B, and C) are routed to MCU TCLK inputs

▫ Two LX7720 bi-level (comparator) outputs are routed to MCU QDEC TIO inputs for quadrature encoder use

▫ The resolver/LVDT transformer primary differential drive (DMOD_IN_P, DMOD_IN_N) and associated ADC

Σ-Δ modulators ADC1, ADC2, and ADC3 are not routed to the MCU, but brought out to test point holes

 The switch board connects to GPIOs on SAMRH71F20-EK's 0.1" header J25 via a 20 way ribbon cable. The

SAMRH71F20 optionally uses GPIOs to monitor five push switches and operate two LEDs as status indicators

Figure 3. SAMRH71-EK using SAMRH71-EK Linker to Connect to LX7720MLF EVB

LX7720MLF Evaluation Board User Guide

Linker Adaptors to FPGA and MCU Evaluation Boards

• The SAMRH71-TFBGA-EK linker (section 7 on page 30) routes PL20 signaling to a SAMRH71-TFBGA-EK

evaluation kit for the SAMRH71F20 MCU. The same signals are routed as for the SAMRH71-EK linker discussed

above:

 The linker board connects signals from the SAMRH71-TFBGA-EK's 0.1" headers J5 and J7 to PL20

▫ All four LX7720 half-bridges are routed to the MCU PWM outputs, for BLDC and stepper compatibility

▫ 3 of the 4 motor phase current ∆Σ serial streams (SNS_OUT_A, B, and C) are routed to MCU TCLK inputs

▫ Two LX7720 bi-level (comparator) outputs are routed to MCU QDEC TIO inputs for quadrature encoder use

▫ The resolver/LVDT transformer primary differential drive (DMOD_IN_P, DMOD_IN_N) and associated ADC

Σ-Δ modulators ADC1, ADC2, and ADC3 are not routed to the MCU, but brought out to test point holes

 The switch board connects to GPIOs on SAMRH71-TFBGA-EK 0.1" header J9 via a 20 way ribbon cable.

Figure 4. SAMRH71- TFBGA-EK using SAMRH71- TFBGA-EK Linker to Connect to LX7720MLF EVB

• The SAMRH707-EK linker (section 8 on page 36) routes PL20 signaling to a SAMRH707-EK evaluation kit for the

SAMRH707F18 MCU. Table 11 on page 38 provides the pinout and MCU resource allocation.

 The linker board connects signals from SAMRH707-EK 0.1" headers J18, J19, and J20 to PL20

▫ All four LX7720 half-bridges are routable to the MCU PWM outputs, for BLDC and stepper compatibility

▫ The resolver/LVDT transformer primary differential drive (DMOD_IN_P, DMOD_IN_N) is routable to the 4th

pair of MCU PWM outputs instead of the 4th LX7720 half-bridge. This eases operation of either a 3-phase

BLDC plus resolver/LVDT, or a bipolar stepper motor without resolver/LVDT without external wiring

▫ 3 of the 4 motor phase current ∆Σ serial streams (SNS_OUT_A, B, and C) are routed to MCU TCLK inputs

▫ All 4 phase current ∆Σ serial streams (SNS_OUT_A x) and the 3 resolver/LVDT Σ-Δ serial streams (ADCx)

are processed on the linker board by RLC passive filters ((Figure 44 on page 36). This allows any of the

LX7720's ∆Σ serial streams to be acquired by MCU ADC channels instead of by DSP firmware

▫ Two LX7720 bi-level (comparator) outputs are routed to MCU QDEC TIO inputs for quadrature encoder use

Figure 5. SAMRH707-EK using SAMRH707-EK Linker to Connect to LX7720MLF EVB

Termékspecifikációk

Márka:	Microchip
Kategória:	nincs kategorizálva
Modell:	LX7720

Szüksége van segítségre?

Ha segítségre van szüksége Microchip LX7720, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók nincs kategorizálva Microchip

Microchip ATECC608B Útmutató

2 Szeptember 2024

Microchip HV860 Útmutató

2 Szeptember 2024

Microchip EVB-LAN9255 Útmutató

2 Szeptember 2024

Microchip LX4580 Útmutató

2 Szeptember 2024

Microchip LX7720 Útmutató

2 Szeptember 2024

Microchip AT32UC3C0128C Útmutató

30 Augusztus 2024

Microchip AT32UC3C1512C Útmutató

30 Augusztus 2024

Microchip AT32UC3A3256 Útmutató

30 Augusztus 2024

Microchip AT32UC3A364 Útmutató

30 Augusztus 2024

Microchip AT32UC3A0512 Útmutató

30 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Roland SD-20 Útmutató

16 Október 2024

SilverCrest SRG 1300 C3 Útmutató

16 Október 2024

IFM TY0058 Útmutató

16 Október 2024

Thule Kit 186039 Útmutató

16 Október 2024

Blumfeldt Solidflor Útmutató

16 Október 2024

Dimplex QRAD200E Útmutató

16 Október 2024

DAS Audio AX-112-5 Útmutató

16 Október 2024

Ferplast Ergocomfort Freetime Útmutató

16 Október 2024

AEG MECK52 Útmutató

16 Október 2024

Black Diamond BD1121530000ALL1 Útmutató

16 Október 2024