Használati útmutató Microchip AT91RM9200

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Microchip AT91RM9200 (18 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/18
SMART ARM-based Microcontrollers
AT15004:Using SAM-BA for Linux on SAM
Devices
APPLICATION NOTE
Introduction
A few of the SAM devices are pre-loaded with the Atmel® SAM Boot
Assistant (Atmel SAM-BA®). This bootloader allows In-System Programming
(ISP) from USB host without using any other external programming interface.
SAM-BA has been validated on various Linux distributions such as Ubuntu,
Debian, Fedora, openSUSE, and Mint. However, it will work on other
distributions as well. Tested distributions are listed at www.at91.com/
linux4sam.
This application note describes the steps to install and use SAM-BA on
some popular Linux distributions to program Atmel ARM® based devices.
Features
Allows to program, verify, and secure an Atmel SAM device without
using a device programmer
Uses USB CDC class for communicating to the host
Use SAM-BA Command Line mode to program SAM devices
Source code for SAM-BA applet is available and can be customized to
user’s needs such as Encrypted loader and custom protocol
Atmel-42728A-Using-SAM-BA-for-Linux-on-SMART-ARM-based-Microcontrollers_AT15004_Application Note-08/2016
Table of Contents
Introduction......................................................................................................................1
Features.......................................................................................................................... 1
1. Introduction to SAM-BA............................................................................................. 3
2. Installing SAM-BA on Different Linux Distributions ...................................................4
2.1. Setup............................................................................................................................................ 4
2.2. Installing SAM-BA.........................................................................................................................4
3. Using SAM-BA ..........................................................................................................6
3.1. Understanding SAM-BA Architecture........................................................................................... 6
3.1.1. SAM-BA Monitor............................................................................................................ 6
3.1.2. Applet Workflow.............................................................................................................7
3.2. Connect device.............................................................................................................................8
3.3. Understanding SAM-BA GUI........................................................................................................9
3.3.1. Memory Display Area.................................................................................................. 10
3.3.1.1. Read Memory............................................................................................10
3.3.1.2. Edit Memory Content................................................................................. 11
3.3.2. Memory Download Area...............................................................................................11
3.3.2.1. Flashing Firmware..................................................................................... 11
3.3.2.2. Reading From Memory.............................................................................. 11
3.3.2.3. Compare Memory with a File.....................................................................12
3.3.3. Script File Functionality................................................................................................12
3.3.3.1. Start/Stop/Reset Recording.......................................................................12
3.3.3.2. Edit the Script File..................................................................................... 12
3.3.3.3. Execute the Script File...............................................................................12
3.4. SAM-BA in command line...........................................................................................................13
4. Tested Devices........................................................................................................ 14
5. FAQ..........................................................................................................................15
6. References.............................................................................................................. 16
7. Revision history....................................................................................................... 17
Atmel AT15004:Using SAM-BA for Linux on SAM Devices [APPLICATION NOTE]
Atmel-42728A-Using-SAM-BA-for-Linux-on-SMART-ARM-based-Microcontrollers_AT15004_Application Note-08/2016
2
1. Introduction to SAM-BA
The SAM-BA GUI tool provides a means to easily program various Atmel ARM ® processor based
microcontrollers.
The key features of SAM-BA GUI are:
performs In-System Programming through JTAG, RS232, or USB interfaces
on-chip and on-board memories programming solutions
can be used via a Graphical User Interface or started in batch mode from a command line
memories and peripheral register display content
user scripts executable from SAM-BA GUI or a shell
operates on both Windows or Linux OS
Note: 
1. SAM-BA for Linux supports only the USB interface.
2. Linux Mint 17.2 LTS and Fedora 23 will be used as the Linux distribution reference for the
application note.
Atmel AT15004:Using SAM-BA for Linux on SAM Devices [APPLICATION NOTE]
Atmel-42728A-Using-SAM-BA-for-Linux-on-SMART-ARM-based-Microcontrollers_AT15004_Application Note-08/2016
3

Termékspecifikációk

Márka: Microchip
Kategória: nincs kategorizálva
Modell: AT91RM9200

Szüksége van segítségre?

Ha segítségre van szüksége Microchip AT91RM9200, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Microchip

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025