Használati útmutató Micro Matic MDD58S-E

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Micro Matic MDD58S-E (20 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/20
USER MANUAL
PRO-LINE REFRIGERATION E-SERIES
2
// www.micromatic.com
CONTENTS
1 3RECEIVING AND INSPECTING
2 SPECIFICATIONS 4
3 INSTALLATION 5
3.1 UNCRATING 5
3.2 SEALING 5
3.3 CLEANING OF CABINET 5
3.4 LOCATION 6
3.5 TAPPING INSTRUCTIONS 7
3.6 DATA PLATE 8
3.7 ELECTRICAL CONNECTIONS 8
3.8 SHELVING INSTALLATION 9
4 OPERATIONS 9
4.1 MECHANICAL TEMPERATURE CONTROL 9
4.2 10DESCRIPTION OF BUTTONS ON THE CONTROLLER
4.3 ELECTRONIC TEMPERATURE CONTROL 11
4.4 DEFROST 12
5 MAINTENANCE 13
5.1 STAINLESS STEEL CARE AND CLEANING 13
5.2 14CLEANING THE CONDENSER COIL
5.3 15DRAIN MAINTENANCE
6 TROUBLESHOOTING 16
7 WIRING DIAGRAMS 17
8 WARRANTY 19
9 TECHNICAL INFORMATION 20
3
// www.micromatic.com
1 // RECEIVING AND INSPECTING
Upon receiving your new Micro Matic Pro-Line Refrigeration E-Series equipment,
check the package and the unit for any damages that may have occurred during
transportation. Visually inspect the exterior of the package. If damaged, open and
inspect the contents with the carrier. Any damage should be noted and reported on
the delivering carrier’s receipt.
In the event that the exterior is not damaged, yet upon opening, there is concealed
damage to the equipment notify the carrier immediately. Notication should be made
verbally as well as in written form. Request an inspection by the shipping company of
the damaged equipment. Retain all crating material until inspection has been made.
Finally, contact Micro Matic.
Open the compressor compartment housing and visually inspect package. Be sure
lines are secure and base is intact.
A NOTE FROM OUR QUALITY CONTROL MANAGER
Congratulations on your new purchase. We would like to welcome you to the Micro
Matic team. The unit in front of you is a great piece of equipment that will become one
of your most reliable tools in your daily operations for years to come!
Prior to shipping your unit, our trained service technicians tested your unit for a period
of 12 hours. This performance test was recorded and a copy of the results is included
with this service manual. During this test, our highly qualied personnel inspected your
machine for leaks, lose components, and improper noise levels. We also tested the
cooling performance in an effort to give you the best and most reliable unit possible.

Termékspecifikációk

Márka: Micro Matic
Kategória: nincs kategorizálva
Modell: MDD58S-E

Szüksége van segítségre?

Ha segítségre van szüksége Micro Matic MDD58S-E, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Micro Matic

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva