Használati útmutató Micro Matic DP-120D-45GR

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Micro Matic DP-120D-45GR (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Job Number:_____________________________________________ Location: ____________________________________________________________________ ____
Add European style while creating dispense excitement
Condition the glass before pouringinvert glass, push down on sprayer
for cold water rinsing
Robust 18 gauge stainless steel construction
Welded corners, nished smooth for safety and appearance
www.micromatic.com • 1 (866) 327-4159
SURFACE MOUNT SERIES 5" X 45"
DRIP TRAY
5” WIDTH TRAY WITH GLASS RINSER
DP-120D-45GR
Brushed Stainless Steel
NSF Certied
(Rinser Only)
Specifications
Central
10726 North Second St.
Machesney Park, IL 61115
Tel. (815) 968-7557
Fax. (815) 968-0363
Southeast
2364 Simon Ct.
Brooksville, FL 34604
Tel. (352) 799-6331
Fax. (352) 796-2429
Northeast
4601 Saucon Creek Rd.
Center Valley, PA 18034
Tel. (610) 625-4464
Fax. (610) 625-4466
West
19791 Bahama St.
Northridge, CA 91324
Tel. (818) 701-9765
Fax. (818) 701-9844
Toll-Free: 1-866-327-4159
www.micromatic.com
©2016 Micro Matic USA, Inc. All Rights Reserved.
Dimensions
Rinser Water Inlet Installation
• Always check local plumbing codes first.
• Install in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure).
• Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking).
• Install in-line shut-off for the rinser system from the street water supply (this must be turned off nightly).
• If teed into soda system make sure system can handle the increased water demand. Have plumber install a
45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system.
• Install a shut-off for the rinser water supply if line is not hard plumbed into the system.
Micro Matic reserves the right to change specifications without notice.
7/8" - 14
000038S-D0216
127mm
5"
64mm
2 1/2" 64mm
2 1/2"
19mm
3/4"
572mm
22 1/2"
1143mm
45"
140mm
5 1/2"
Part No. Dimensions Description Shipping Weight Box Dimensions
DP-120D-45GR 5"W x 45"L x 3/4"H Stainless Steel TBD TBD
Drain:
Threaded Brass
3 1/2" x 5/8" - 18 1/2" O.D.
3 3/4" Dia.
GR-1561
1/2" BSP

Termékspecifikációk

Márka: Micro Matic
Kategória: nincs kategorizálva
Modell: DP-120D-45GR

Szüksége van segítségre?

Ha segítségre van szüksége Micro Matic DP-120D-45GR, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Micro Matic

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva