Használati útmutató Metra 99-8248B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 99-8248B (8 oldal) a Autós készlet kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
REV. 12/9/2014 INST99-8248B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Installation instructions for part 99-8248B
• ISO DIN radio provision with pocket
Painted black
A) Radio housing trim panel • B) Brackets • C) Pocket • D) (4) #8 x 3/8” screws E) (2) Panel clips
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 or TYTO-02
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
A B C D
E
Dash Disassembly
Toyota Highlander 2014-up .................................. 2
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
Table of Contents
99-8248B
1. Unsnap and remove climate
control and the long trim panel
with it. (Figure A)
2. Unsnap the thin trim panel from
the top and right side of the radio.
(Figure B)
3. Unsnap and remove the climate
vents from either side of the radio.
(Figure C)
4. Remove four 10 mm bolts to
remove the factory radio.
(Figure D)
Continue to Kit Assembly
Dash Disassembly
(Figure C)(Figure A)
(Figure D)(Figure B)
99-8248B
Kit Assembly
(Figure B)(Figure A)
ISO DIN radio provision with pocket
1. Attach the (2) panel clips to the
radio housing.
Note: The factory panel clips
may be used if preferred.
2. Mount the pocket to the bracket/
panel assembly with the
(4) #8 x 3/8” Phillips screws
supplied. (Figure A)
3. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
4. Locate the factory wiring
harness in the dash. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. All accessories, switches,
and especially air bag indicator
lights must be plugged in before
reconnecting the battery or cycling
the ignition. Test everything for
proper operation.
5. Mount the radio/bracket assembly
into the dash opening.
6. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly.

Termékspecifikációk

Márka: Metra
Kategória: Autós készlet
Modell: 99-8248B

Szüksége van segítségre?

Ha segítségre van szüksége Metra 99-8248B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Autós készlet Metra

Metra

Metra 99-7367HG Útmutató

4 Szeptember 2024
Metra

Metra 99-8223 Útmutató

4 Szeptember 2024
Metra

Metra 99-7422 Útmutató

4 Szeptember 2024
Metra

Metra 99-7875 Útmutató

4 Szeptember 2024
Metra

Metra 99-3302 Útmutató

4 Szeptember 2024
Metra

Metra 99-5802 Útmutató

3 Szeptember 2024
Metra

Metra 99-7874 Útmutató

3 Szeptember 2024
Metra

Metra 99-5832G Útmutató

3 Szeptember 2024
Metra

Metra 99-9011 Útmutató

3 Szeptember 2024
Metra

Metra 99-6000 Útmutató

3 Szeptember 2024

Útmutatók Autós készlet

Legújabb útmutatók Autós készlet

Livoo

Livoo TEC602 Útmutató

2 Október 2024
Parrot

Parrot Minikit Chic Útmutató

29 Szeptember 2024
Nedis

Nedis DTCTCO20WT Útmutató

22 Szeptember 2024
Bury

Bury UNI Útmutató

21 Szeptember 2024
Caliber

Caliber HFB 200 Útmutató

19 Szeptember 2024
Bury

Bury Easytouch Pro Útmutató

18 Szeptember 2024
Alpine

Alpine HCE-C157D Útmutató

18 Szeptember 2024
Nokia

Nokia HF-210 Útmutató

17 Szeptember 2024