Használati útmutató Metra 99-7626HG

Metra Autós készlet 99-7626HG

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 99-7626HG (8 oldal) a Autós készlet kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/8

REV. 10/9/2015 INST99-7626HG

CAUTION: Metra recommends disconnecting the negative battery

terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your

local Dealership for more information. All accessories, switches,

climate controls panels, and especially air bag indicator lights

must be connected before reconnecting the battery or cycling

the ignition. Also, do not remove the factory radio with the key

in the on position, or the vehicle running. It would be best to

remove the key from the ignition and then wait a few seconds

before removing the factory radio.

Installation instructions for part 99-7626HG

• ISO DIN radio provision with pocket

• DDIN radio provision

• Built and painted in multiple colors to match the

factory color and appearance

• A) Radio housing trim panel • B) Radio brackets • C) ISO Pocket • D) (4) #8 x 3/8” Phillips screws

• E) (2) White panel clips

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7552 Antenna Adapter: • 40-NI12

• Panel removal tool

• Phillips screwdriver or drill with long Phillips bit

• T-20 Torx screwdriver

TOOLS REQUIRED

(Without NAV and with the factory climate controls above the radio controls)

A DCB

Dash Disassembly ................................................. 2

Kit Assembly

– ISO DIN radio provision with pocket 3 ......................

– DDIN radio provision 3 ............................................

Table of Contents

99-7626HG

Dash Disassembly

1. Remove top trim above climate

control panel and remove the

exposed Phillips screw holding the

climate control panel. (Figure A)

2. Unclip and remove climate control

panel. (Figure B)

3. Remove (2) Phillips screws at the

top of the radio trim bezel.

(Figure C)

4. Remove trim panel under the

radio and remove the (2) exposed

Phillips screws securing the radio.

(Figure D, E)

5. Remove (4) Phillips screws securing

the metal brace above the radio.

(Figure F)

6. Unclip, unplug and remove the radio.

7. Remove the (2) T-20 Torx screws

holding the climate control module

to the factory radio bracket

assembly, and set aside for

kit assembly.

Continue to kit assembly

(Figure A) (Figure D)

(Figure B) (Figure E)

(Figure C) (Figure F)

99-7626HG

(Figure A)(Figure A)

(Figure B)(Figure B)

Kit Assembly

ISO DIN radio provision

1. Attach the supplied (2) to white panel clips

the radio housing trim panel

2. Remove the metal “DIN” sleeve and trim

ring from the aftermarket radio.

3. Secure the included to the radio brackets

radio using the screws supplied with the

radio. (Figure A)

4. Mount the to the bracket assembly pocket

with the (4) #8 x 3/8” Phillips screws

supplied. (Figure A)

5. Mount the climate control module to

the bracket assembly below the radio and

pocket, using the hardware removed

during disassembly. (Figure B)

6. Locate the factory wiring harness and

antenna plug in the dash and make all

necessary connections to the radio and

climate control module. Metra recommends

using the proper mating adapters from

Metra and/or AXXESS.

7. Mount the new radio assembly into the dash

using the factory hardware and reassemble

the dash in the reverse order of disassembly.

DDIN radio provision

1. Attach the supplied (2) to white panel clips

the radio housing trim panel

2. Secure the included to the radio brackets

radio using the screws supplied with the

radio. (Figure A)

3. Mount the climate control module to

the bracket assembly below the radio,

using the hardware removed during

disassembly. (Figure B)

4. Locate the factory wiring harness and

antenna plug in the dash and make

all necessary connections to the radio

and climate control module. Metra

recommends using the proper mating

adapters from Metra and/or AXXESS.

5. Mount the new radio assembly into the

dash using the factory hardware and

reassemble the dash in reverse order of

disassembly.

Termékspecifikációk

Márka:	Metra
Kategória:	Autós készlet
Modell:	99-7626HG

Szüksége van segítségre?

Ha segítségre van szüksége Metra 99-7626HG, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Autós készlet Metra

Metra 99-8270HG Útmutató

3 Április 2025

Metra 99-8722B Útmutató

3 Április 2025

Metra 99-7802CH Útmutató

3 Április 2025

Metra 99-8214TG Útmutató

3 Április 2025

Metra 99-4000 Útmutató

1 Április 2025

Metra 95-7883HG Útmutató

29 December 2024

Metra AX-ADCT4 Útmutató

29 December 2024

Metra 99-7345B Útmutató

29 December 2024

Metra 99-7339B Útmutató

29 December 2024

Metra OESWC-7552H Útmutató

29 December 2024

Útmutatók Autós készlet

Legújabb útmutatók Autós készlet

ZZ-2 IC-SYM Útmutató

2 Április 2025

Nokia HF-33W Útmutató

16 Január 2025

Renegade REN10KIT Útmutató

31 December 2025

Scosche HA1714B Útmutató

29 December 2024

HTC Car Kit Útmutató

16 December 2024

Pioneer 12.301232-04 Útmutató

6 Október 2024

Livoo TEC602 Útmutató

2 Október 2024

Parrot Minikit Chic Útmutató

29 Szeptember 2024

Nedis DTCTCO20WT Útmutató

22 Szeptember 2024

Bury UNI Útmutató

21 Szeptember 2024