Használati útmutató Metra 99-6531HG

Metra Autós készlet 99-6531HG

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 99-6531HG (8 oldal) a Autós készlet kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/8

REV. 1/6/2016 INST99-6531HG

CAUTION: Metra recommends disconnecting the negative battery

terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your

local Dealership for more information. All accessories, switches,

climate controls panels, and especially air bag indicator lights

must be connected before reconnecting the battery or cycling

the ignition. Also, do not remove the factory radio with the key

in the on position, or the vehicle running. It would be best to

remove the key from the ignition and then wait a few seconds

before removing the factory radio.

Installation instructions for part 99-6531HG

• ISO DIN radio provision with pocket

• Painted high gloss black

• A) Radio trim panel • B) Radio brackets • C) Radio mounting brackets • D) Pocket • E) (4) Panel clips

• F) (2) #8 x 3/8” Phillips screws • G) (4) 12 mm x 5 mm Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • XSVI-6523-NAV Antenna Adapter: • 40-EU55

• Panel removal tool • Phillips screwdriver

• 86-3528 radio removal tool • Cutting tool

• Torx T-25 driver

TOOLS REQUIRED

ADC E F

Dash Disassembly ................................................. 2

Kit Assembly

– ISO DIN radio provision with pocket 3 ......................

Table of Contents

99-6531HG

Dash Disassembly

1. Using Metra’s 86-3528 radio

removal tools, pull the factory radio

from the dash. (Figure A)

2. Remove (2) T-25 Torx screws from

the top of the factory radio trim

panel opening, and (2) T-25 Torx

screws from the bottom of the

opening. (Figure B)

3. Pull down slightly on the top center

of the panel, and then unclip and

remove the panel. (Figure C)

4. Remove (4) T-10 Torx screws

securing the factory radio clip

brackets to the panel. (Figure D)

5. In the sub-dash cavity of the

vehicle, grind or cut the (2) silver

rivets from the left and right side.

(Figure E)

6. Cut and remove the shaded portion

of the sub-dash cavity as shown.

(Figure F)

Note: Take caution not to cut

the vent ducts.

Continue to kit assembly.

(Figure A) (Figure D)

(Figure C) (Figure F)

(Figure B) (Figure E)

Remove

shaded

area

99-6531HG

Kit Assembly

(Figure C)

(Figure B) (Figure D)

(Figure A)

ISO DIN radio provision with pocket

1. Secure the to the pocket radio

brackets with (2) #8 x 3/8” screws

supplied. Note: The pins on the

brackets will align with the front

mounting hole of the pocket.

(Figure A)

2. Remove the metal DIN sleeve and

trim ring from the aftermarket radio.

3. Slide the radio in the pocket/bracket

assembly, and then secure to the

assembly using screws provided

with the radio, or the (4) 12mm x

5mm Phillips screws included in

this kit. Note: The screws must

be flush in the radio brackets

to slide into the radio mounting

brackets. Most radios will mount

best with the radio brackets

slid to the front edge, and the

radio’s mounting position behind

the arrow on the radio bracket.

(Figure B)

4. Position the radio mounting

brackets into the factory radio trim

panel, and then secure with the (4)

T-25 Torx screws removed during

step four of dash disassembly.

(Figure C)

5. Reassemble the panel back into

the vehicle, in reverse order of

dash disassembly in step 2.

6. Locate the factory wiring harness

and antenna plug in the dash.

Metra recommends using the

proper mating adapters from

Metra and/or AXXESS. Re-connect

the negative battery terminal and

test the radio for proper operation.

7. Slide the completed assembly into

the radio opening between the

radio mounting brackets until it

clips into the opening.

8. Attach the (4) to the panel clips

6531 radio trim panel. (Figure D)

9. Snap the into radio trim panel

the opening around the radio.

Termékspecifikációk

Márka:	Metra
Kategória:	Autós készlet
Modell:	99-6531HG

Szüksége van segítségre?

Ha segítségre van szüksége Metra 99-6531HG, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Autós készlet Metra

Metra 99-8270HG Útmutató

3 Április 2025

Metra 99-8722B Útmutató

3 Április 2025

Metra 99-7802CH Útmutató

3 Április 2025

Metra 99-8214TG Útmutató

3 Április 2025

Metra 99-4000 Útmutató

1 Április 2025

Metra 95-7883HG Útmutató

29 December 2024

Metra AX-ADCT4 Útmutató

29 December 2024

Metra 99-7345B Útmutató

29 December 2024

Metra 99-7339B Útmutató

29 December 2024

Metra OESWC-7552H Útmutató

29 December 2024

Útmutatók Autós készlet

Legújabb útmutatók Autós készlet

ZZ-2 IC-SYM Útmutató

2 Április 2025

Nokia HF-33W Útmutató

16 Január 2025

Renegade REN10KIT Útmutató

31 December 2025

Scosche HA1714B Útmutató

29 December 2024

HTC Car Kit Útmutató

16 December 2024

Pioneer 12.301232-04 Útmutató

6 Október 2024

Livoo TEC602 Útmutató

2 Október 2024

Parrot Minikit Chic Útmutató

29 Szeptember 2024

Nedis DTCTCO20WT Útmutató

22 Szeptember 2024

Bury UNI Útmutató

21 Szeptember 2024